daves_not_here
-
Posts
417 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by daves_not_here
-
-
As a stop-gap have you tried blacking out your fiber optic?
It's a pretty big dot and depending on the lighting I go sideways.
DNH
-
Cleaning a glock? Sacrilege!
A few things I've had happen.
The fingers pressing on the other side of the mag release. It's the part that sticks out on the opposite side. Shifting the gun in the hand cleared that up. I also get more leverage on the button.
Worn or chewed up release, I could press it so far that the other side of the release caught the magazine. This started happening a day before a match probably because I was pressing harder because of nerves. $4 fix.
DNH
-
It is possible to get benefit from a laser or airsoft.
I have personally used a SIRT. It is a good indicator of takeup and trigger break. I found the green laser paid for itself in saving of ammo by running through stages at the range after local matches. It kept me honest about where shots were going.
I no longer use my SIRT since I no longer use a Glock.
It doesn't sound like you're doing a program with your dry-fire.
I would suggest you buy Steve Anderson's first dry-fire book and a timer. Do the drills and write down the par times in the book. The book is also a log.
Buy a real timer.
Use real full-size targets along with reduced sized. It will help you hit the A zone or down zero rather than just shooting at the brown blur and hoping you hit well. http://www.benstoegerproshop.com/Build-Your-Own-Scaled-Dryfire-Target-Kit-p/byo-df-kit.htm
Don't pull the trigger on the first seven drills.
You will get better. Improvement of skills with a good dry fire program will take care of your frustration. It will be cheaper in the long run.
DNH
-
Deburr or round the primer pin. It sounds like the primer is holding on to a burr on the pin.
DNH
-
Get some extra primer tubes while you're calling Dillon.
DNH
-
Stoeger has a table of times for drills in his Skills and Drills book.
To improve times for live-fire practices do dry-fire.
Anderson's dry fire books has goal times for his drills. For the ones he doesn't list times he explains how to get a baseline time and how much to reduce the time for improvement. This approach will be good for your live-fire.
The books by these two guys have been recommended all over this forum. It's worth repeating.
DNH
-
I was warned that this would happen and I have a spare so no real down time.
However, I bought this pistol in September!
Am I really dry-firing that much?
Anyone have suggestions on how to make this spring last longer? No, less practice is not an option and I'm actually starting to ramp up.
This is a IPSC production pistol so stock parts are required. Any other CZ factory parts to consider?
Is there anything I can do with the trigger area to make it less stressful on the spring?
Thanks,
DNH
-
No one has said anything inherently bad about the P226 but only compares the trigger to other pistols and lack of aftermarket parts.
I think I'm going to try out the following analogy to new competitors going the P226 route.
"Using a P226 in competition is like driving a Formula One race with a Hummer. No one is going to say the vehicle is bad but you really aren't competitive because the vehicle is not suitable for what you're doing with it."
I happen to like P226's and consider them fine guns, but have never considered them for competition.
Thanks everyone for your thoughts and comments.
DNH
-
Grip and trigger were my first suspicions on why they aren't common in competition.
Unfortunately I think these are subtle things that won't be important to enough to a P226 fan. Luckily they're quality guns and you really don't lose your money re-selling them.
DNH
-
I've seen a lot of shooters thinking about competition favoring the Sig P226's.
I can understand why people would want that pistol. Similar to 1911 thinking.
Why aren't many running them in competition? What are the things about this gun that doesn't make it suitable?
I don't want to make this a rant but I'd like to give some good direction to the new shooters who show up with a P226 in a Serpa.
Any other suggestions to set them up for success would be helpful.
Thanks,
DNH
-
I think you should experiment.
Do you get better match results from the M&P or CZ? Run with whatever gets you better results = Use the tool that works better.
You'll like the results and the gun, enjoy the sport more and shoot more. This happy cycle will make you a better shooter.
Try other things every once in a while because your shooting style will change. You may end up running your CZ or something completely different.
DNH
-
Whichever one for your hand better.
Between these two guns I think it will come down to your personal choice.
For me, the final selection criteria for choosing a gun are; how it fits the hand, how it points, the trigger, manual of arms and what kind of aftermarket things you want. M&P's may have more aftermarket things.
The two you have proposed are good guns with good support so reliability and maintainability are not really a factor in your decision.
DNH
-
Do you enjoy tinkering? Then don't feel guilty. Unless it breaks the bank and you get in trouble.
I think it is important to remember that it's the driver not the gun that improves performance. Reliability is another thing and can be helped with tinkering.
There are mental benefits for personalizing your gun, within limits. If you've got a nice gun you'll want to shoot it well. Or, if that gun feels really nice in your hands with those new grips you'll shoot it more. Same with trigger, sights etc.
In the end this hobby is about your personal enjoyment.
If you want to read more on tinkering do a forum search for 1911.
DNH
-
Run what you have.
Borrow what you don't.
For the next pieces needed you'll find a way to budget and there will be someone to sell it to you.
The payback is the experience and camaraderie = priceless.
Just get out there, then you'll know what your budget is.
DNH
-
enroute,
Thanks for bringing up RE-learning.
We return to the present moment over and over. As reality is instantaneously created we witness it moment by moment. Every time we see something new. In a way this is RE-learning.
Reading through a book for another time we begin to see more and more in the words from the wisdom we have developed through mindfulness. This is an example that I would call RE-learning.
Brian's book is a good one for this RE-learning. The words constantly have a new and deeper meaning.
Today it's page 82 - Looking the Shot Off.
DNH
-
... I was wondering whether anyone has tried to lighten the mag retention spring so that it takes less force to release the mag?
I think a lighter mag release spring is not a good idea. For some there is a problem of the fingers or the palm inadvertently releasing the mag. I've used to do it and continue to see this happen to others at matches. I think it has something to do with the buzzer...
A bigger mag release button might something to look into.
Regardless of the time it takes to shift the grip it takes longer to get the next magazine up to the gun.
Re-establishing full-firing grip with both hands happens during the punch out after the reload for me.
I've found slide release with the thumb of the strong hand or support hand just as fast. Glock's extended slide release I prefer the strong hand thumb. Shadows the support hand thumb.
DNH
-
I don't think one can say one type of bullet is more accurate than another just because one has a jacket and the other is just lead, copper plated, moly coated etc. It's what runs well in your gun that matters in the end.
There's probably load data and accuracy results of Bayou's on this forum.
I'd say buy a batch and run em and see if you like em!
To improve your results you might have to play around with OAL and tenths of grains of powder.
DNH
-
I'd say do Bill Drills both at a target and at the berm. Also put in a dummy round somewhere in the six.
If you can see your gun go up and down and call all six shots your Alpha Charlie pattern should stop.
Worked for me. It's also a lot of fun.
DNH
-
.45 auto rim?
-
What kind of springs are you using and how does your slide release look?
Also, are you seeing any wear on the inside of the slide or front bushing?
Unless it's just fatigue, bad material or bad heat treat there might be something out of tolerance causing stresses. Sharp corners focus bending stresses.
DNH
-
It seems like elbows out is the important element regardless of bent or locked.
I think this physically keeps the arms from rising with bone alignment and recruitment of the lats. I think an analogy is when you push hard against something you automatically rotate your elbows out.
Whether the elbows are locked are bent seems to be dependent on physique and flexibility.
DNH
-
My Salomon 3D's wore out quick also. I suggest keep them on the trail and off the road.
Awesome shoe. I think the good traction is because of a softer compound not that they're deficient in any way.
DNH
-
8.3.4 “Start Signal” – The signal for the competitor to begin their attempt at the course of fire. If a competitor fails to react to a start signal, for any reason, the Range Officer will confirm that the competitor is ready to attempt the course of fire, and will resume the range commands from “Are You Ready?”.
I like that rule. The beep can be drowned out by shooting from the adjacent bay or the rest of the squad talking
so the wording of "for any reason" is great to have. I try to be ready for the beep at "Shooter Ready". I guess I take things literally. DNH
-
I think the following two posts highlight the most important part of the draw SIGHT PICTURE.
I used to spend a lot of time on my draw. I got it to where I was "proficient" but I kept on working at it....The next thing I worked was something people sometimes overlook (I call it aiming speed) The time it takes you to line up the sights. The faster I would present the gun the slower my aiming speed would be. So I worked on smoothing out the last few inches of the presentation of the gun which in turn increased my aiming speed...
Get your draw to an A at 25 yards to 1.25. Point shoot draws aren't skill builders, but they look cool.
"Acceptable sight picture" part of the draw right before the shot that is the most important. Mr. Dry-Fire Steve Anderson stresses this by having his first seven drills you don't pull the trigger but confirm a sight picture for an A hit.
Here's Bob Vogel's explanation of draw speed and how distance affects the time to the first shot. He's 1.02s at 7 yds and 1.21s at 15 yards with 1.39s at 25.
http://youtu.be/0vNdH5J2T8I?t=3m15s
DNH
Good Zen video or audio
in Zen
Posted · Edited by daves_not_here
I like this video about Kyudo (Japanese Archery).
There are Zen aspects in Kyudo and I have found practicing this martial art has been beneficial to my mindfulness practice and other shooting activities.