-
Posts
31 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by t_telecom
-
-
It was a great match! Looking forward to the next one.
Thanks Rick & Sue!
And whoever helped set up the awesome stages.
-
Will this be all Steel Challenge stages?
-
Doe's this mean if we arrive the day before the main match we cannot watch the competitors shoot the stages?
-
you guys in open have to be careful with your 170 mags. USPSA allows (if i remember correctly) 171.5 mm while IPSC is a straight 170 mm. i have three 170 mags but the one made by Ron Howard is not IPSC legal but is fine for USPSA. i have been told that to make 171.5 legal to 170 you have to very carefully shave the lips.
Also for standard (limited) note that the IPSC box is not the same as the USPSA box!
Would it be to much trouble to ask you to post a close up picture of a 170mm mag that has been modified?
-
Since I will need to load different bullets, is there an approximate round count yet?
Thanks
-
Thanks everyone for the responses! I will put the 3mm SVI basepads on when I get home from work and measure them again to be sure they are legal.
-
Never having shot an IPSC match before I have a question for Open division 170mm mags. I have read the rule book and searched this site but I'm still a little confused about what specifically is legal? Right now I have SVI mags and Dawson basepads. I have some 3mm SV basepads but when I measure them I can't really tell much difference in the length? Any help would be appreciated.
-
This was a great match, except for stage 10, which I messed up! A big thanks to Dan for getting me in! I know this takes a lot of hard work from a lot of people to put together! Hope to come back next year.
Tom
-
The same thing happened to me last year I even emailed the match director to ask if I had won a plaque and below was his response. After quite some time and several emails, still no plaque. This Stinks!! I won 5th B in Open and I think there were 15 B class shooters if I remember correctly.
Sent: Wed, Sep 28, 2011 9:49 am
Subject: Re: Question
(MD), I hate to keep bothering you but it looks like I may have won a Plaque!!!
One of my first one ever!! Will they be mailed out to the winners?
First reply; That is correct
>
> (MD)
Second reply; Yes, when I can find some time to do so
(MD)
-
It was a great match! Looking forward to the next!
Thank to all who worked hard to make this match happen.
-
It was a very fun match! I hope to be able to return next month.
-
Peter, I was wondering if you have had time to get all the plaques out because I still have not received mine.
Thanks,
Tom
-
Muzzle rise was minimal and it felt very soft to shoot. I'm going to load up 30 more and go shoot them and see what happens in my comp. I would think with a CMJ bullet you might not get much leading in the comp? Those two rounds were shot through a full size Bedell with no holes in the barrel, CCI small pistol primers with mixed headstamp brass. With 6.8 grains the case is maybe 3/16" from the top, just a hair less than with 3N37.I'm going to do some more testing? I have been shooting 3N37 and I like it very much. I just had this N340 setting here that I bought for my limited gun so I thought I would try it? According to the burn rate chart on the VV website it's not as fast burning as HS6?
Thanks for the response's.
-
I'm fairly new to 9mm major. Is there any reason that you shouldn't use VV-N340 for 9 major? I just got back from chronoing a couple rounds. I found one old post where someone said they used VV N340,7.2grs, 124-FMG, MG and OAL, 1.165 but no other info. I didn't see any problems with primers etc... However I wanted to check with more experienced shooters before I continue.
124-MG-FMJ
6.8grs VV N340
Vel - 1366 - PF - 169
Vel - 1367 - PF - 169
-
No response moved to another thread.
-
Hey everyone it was a great match! However I need someone to check this out to see if I'm looking at it right. I looked up the guy that won B class and as of August he was in A class. What happens now? Or am I just looking at it wrong?
Overall Results for Pistol Open
Match Name: 2011 Georgia State USPSA Championships
Match Date: 9/09/11
Host Club CHEROKEE GUN CLUB (GA03)
Organization: USPSA
Additional Info: Show Stage Profiles
Place Name USPSA Comp # Class PF Lady Mil Law Age Match Pts Match %
1 William E. D TY38810
139 M Major 1006.2313 100.00%
2 Todd J L2458
104 GM Major 986.3110 98.02%
3 David S TY42164
59 GM Major 945.1855 93.93%
4 Yuth J A35986
225 B Major 839.8093 83.46%
5 Larry N A22513
78 M Major 826.3254 82.12%
Shooter Information:
Shooter Name: WEERAYUTH J
Member Number: A35986
Joined USPSA: 3/26/97
Membership Expiry Date: 3/31/12
Membership Info Updated: 4/27/11
Data On Web Updated: 8/15/11
His classifications are listed below?
Classifications (updated 8/15/2011):
OPEN Class: A Pct: 84.03 High Pct: 84.03
LIMITED Class: A Pct: 81.13 High Pct: 81.13
LIMITED10 Class: B Pct: 72.84 High Pct: 72.84
PRODUCTION Class: A Pct: 78.08 High Pct: 78.08
REVOLVER Class: U Pct: 0.00 High Pct: 0.00
SINGLESTACK Class: U Pct: 0.00 High Pct: 0.00
-
There are 12 Single Stack Shooters now!
-
This sounds like it's going to be a great match!!
-
This looks like a really fun match!
-
I filed an angle on my decapping pins and it works like a charm. Thanks again for the info.
-
Does anyone know if the Nintendo Wii play Blu Ray?
-
Somebody needs to create a BE app for the Iphone!
-
I read through this post and tried this drill in practice and it does give you a good sense of where you are and what you can do. I then backed up another 10 yards and did it again. I had to slow down just a little to get my hits.
-
Thanks, I will file an angle on it as you have suggested and go from there. I have had my kids just depriming them for me in advance. So if this fixes the problem they will lose there job.
The Best Comp?
in Open Pistols
Posted
Eric, not knowing much about comps. Will yours work on a threaded barrel? And where can I get one?