[9 mm bullet puller]

I have never used that one, I have a midway collet puller that is over 10 years old..has held up well

[Glock 34 + Titegroup + what bullet?]

I have shot 125gr blue bullets, with titegroup, and xtreme 124gr bullets with good success. There are alot of good choices out there.

[When you buy components on sale, or in bulk...]

Had good luck with Powder Valley, and xtreme bullets...look for sales, xtreme sends out emails with discounts.

[Load data for 9mm 147gr. coated bullets & CFE pistol]

On 3/28/2018 at 11:33 PM, Redaye said:

I followed a similar path. I use Bayou 147gr with 3.7gr CFE, cci #500, 1.14 OAL. Provides a relatively soft recoil with good accuracy. This recipe was suggested by a fellow shooter using the same bullet. I haven't chrono'd this so I can't comment on PF for this load. I've range compared it with 3.2gr of Tite Group and I couldn't detect a difference.  

is the fired brass just as dirty or more clean with CFE over Titegroup?

[550B advice and opinions]

Hello,

I have reloaded for years using a Lee Turret press. A good friend several years ago bought a 550B, never used it and sold it to me. I am kinda new at this so bear with me. I reload(in order of importance) 9mm, 40S&W, 45ACP and .223. I would like to keep the Lee dies I have for all the aftermentioned calibers. Here is what I have

(1) Dillon550B press with the powder measure, bar, and 45acp dies-came from the factory with it

(1) deluxe quick change kit-powder measure, stand, powder bar

(1) conversion kit in 38spl(I will sell as I dont reload 38spl)

(1) aluminum roller handle

(1) spare parts kit

(1) flip tray

(1) cover for press

(1) 4 large primer pickup tubes

(1) set of redding 38spl dies-going to sell

(1) set of dillon 44mag dies-going to sell

(1) dillon beam scale

(1) my RCBS 505 powder scale-going to sell

(1) Hornady powder scale-going to sell

I am going to sell the dillon 45acp, 44mag, and 38 spl redding dies, also going to sell the RCBS scale and Hornady scale. I know I am going to have to buy a 9mm conversion kit and small primer tubes but what else would you all recommend to get to where I can reload the above calibers?

Any precautions to using the Lee dies?

Do I need a Dillon powder die since I am using Lee dies?

I am looking for the most affordable way to do this. I might buy another quick change kit for my 40S&W.

Lastly, where do you all get your accessories besides dillon?

Thanks from a newbie,

John

[T.R. Graham's Match Grade Slide Lock]

thanks this will be going into a glock 35 with a factory glock barrel.

[T.R. Graham's Match Grade Slide Lock]

Hello, I am thinking about ordering one and was wondering if anyone has used one and what were there results if any improvement in accuracy.

Thanks,

John

[Salient Arms Glock "Tier One" Package]

I have never shot a salient arms glock it just seems that they are alittle pricey on what they offer...but that is my opinion.