[Blue Bullets vs Ibejiheads]

aside from plated, i have been using Ibejiheads from 1124, 147, 180,200 & 220 , usually ship within the week .

Good Quality Coated Lead Bullets. the 125g faster than my plated reloads. the 200/220g i love.

 

testing Blue Bullets Now in 135TC & 147RN

 

 

[650 shell plate timing--fixed--indexer block]

Mine is worst than that .. brass and primers getting waisted

[Advice needed on open glock project]

125gr Ibejiheads with 7gr of AutoComp is a great combo.

What Pistol and OAL? i am thinking of 125 ibeji 6gr AutoComp @ 1.145 OAL for Glock22 40-9mm

[OPEN GLOCKS]

I've been campaigning my G22 open gun for 2 years. No issues at all. Runs just like a stock Glock. Never FTE, FTF ever! It's a tank. Shorter slide cycles faster.

Jager comp, Lone Wolf Dist barrel, Lone Wolf connector & trigger stop, C-More STS sight, Mag well, Taylor base.

Load Data Please..

[Here it is -STI Spartan 9mm Load Data]

If anyone wants it in Excel format just PM me and I will get it to you ASAP.

Going back to the range tomorrow to do more testing with MG 124 HP, a 130g LRN and my own hand casted LEE 124g LRN.

If anyone wants it in Excel format just PM me and I will get it to you ASAP.

Going back to the range tomorrow to do more testing with MG 124 HP, a 130g LRN and my own hand casted LEE 124g LRN.

Please email excel format if you still have it.. Planning to make up a load for mine

[Vihtavuori N310]

I got 8 lbs of that stuff,and don't know what to do with it.I dolt load 45's much any more.Its to fast for 40's and 38

N310 is great for 40 with 200gn. Send me the 8Lbs

I got 8 lbs of that stuff,and don't know what to do with it.I dolt load 45's much any more.Its to fast for 40's and 38

N310 is great for 40 with 200gn. Send me the 8Lbs

What is the load recipe..

I am planning to load it in .40 with 200 grain lead coated at 1.140 for Glock and 1.185 for STI 2011

[Who else is running VV350 for 9 major?]

I've been using VV N-350 behind a 124 gr MG JHP for 9 Major for several years now. Along with a comp, I've got several holes in the barrel so it takes every bit of the case to hold enough powder to make major, but it hangs in there just over 170 PF.

I do need to be careful when loading. If the case is not full, PF drops real close to 165 real fast. Chronoed 165.1 at Area 4 back in 2011. That was cutting it too close.

Prior to VV N-350, I used HS-6. A nice powder that is easy to obtain. Just a little dirtier than N-350. I would not hesitate to go back to it if N-350 became inaccessible.

Bill

What is the load recipe... nned one for an Open Glock 34 with carver comp. 125G Lead Round nose under N-350.

[how many grains VV N350 for 124 gr to shoot 135ish PF from G34]

Even though I use N350 for my major loads, I didn't think it worked too well for minor loads.

I'd suggest 4.1 grains of Titegroup, behind a 124-125 grain bullet.

What is your Major Load Recipe? i am planning to load 125G Lead Round Nose over N-350 At 1.135 OAL.

[Berry Plated or Ibeji coated for 9mm minor]

I have used Ibeji almost all of last season..they are a great bullet.

Loaded solo1000 with them 3.9gr. 124gr. Bullet. 132pf out of a G34

What's the OAL ? nice to have options, i have 3.3g N320 between 1.125-1.130 average of 130pf for ibejiheads 147G FP and 3.9-4.0 for 125G Round

[Decocker CZ75 dont seem popular why?]

I love my CZs.. Sold my 2 shadow and end up getting 2 new again from CZCustom plus a compact L and a sp01 tactical de cocker at my local gs.

[Titegroup and 125gr Ibejiheads for minor pf]

CZ sp01 Shdaow with Ibejiheads 125RN N320 3.9 - 4.0 grains with OAL of 1.11 - 1.12 gives me power factor of 129 - 132. Recently shot the USPSA Texas open with 3.9 grains and ave at 130pf match chrono .