[Burris XTRii 1-8 scope]

I'm having a hard time getting pic's down to the 1.95MB size so I'll just post a link to them.

https://www.flickr.com/gp/145347360@N05/B94b78

[Burris XTRii 1-8 scope]

Finally got the scope mounted and boy do I like it. The glass is great and the electro dot is day light bright. If I mount the scope so I can leave the rear sight mounted I have to slide my head forward slightly on 8 power but I'm good on lower powers. If I mount it with no rear sight on the gun the eye box is good on any power. I mounted the scope on my new DD4v11 pro using a Samson QD mount and I'm hoping to sight it in tomorrow.

[Burris XTRii 1-8 scope]

I ordered a SFP ballistic dot model and it should be here Thursday. The dealer I bought this scope from has one more and prices are very good. 

[Burris XTRii 1-8 scope]

My dealer says he gets the second one his distributor gets in and I get that one ,so who knows when that will be:(

[Carbide 223 dies?]

I want to start loading 223/5.56 on my 550 and I was wondering if it's worth paying the extra money for the carbide dies over the non carbide.

 

Thanks

[Burris XTRii 1-8 scope]

9 hours ago, P.E. Kelley said:

Looks like 4 are available here.

I don't have one yet.

http://defenderoutdoors.com/burris-201010-xtr-ii-1-8x28mm-objective-34mm-tube-matte

I saw these listed for $800+ somewhere else.

[New Primary Arms 1-8 SFP]

PA says it is the same optical quality as their 1-6x.

[Burris XTRii 1-8 scope]

Just spoke with burris rep. His info is ....before oct

Sent from my SCH-I545 using Tapatalk

Just got an e-mail today saying a small batch is here from Japan and is in QC and looking really good. There a big batch that should be here in Sept.

[Burris XTRii 1-8 scope]

Just spoke with burris rep. His info is ....before oct

Sent from my SCH-I545 using Tapatalk

Wow...They just keep pushing the release date back. I think if i had the extra money I would just go buy the Primary Arms 1-8 and not wait

[Burris XTRii 1-8 scope]

Optics planet and sport optics both says they have them in stock.

[Burris XTRii 1-8 scope]

Anyone here have one and if so how do you like it?

I just ordered one with the ballistic dot reticle (similar to vortex razor with the JM-1 reticle). I hope I made the right choice.

[What grain bullets are you using in your P-09]

Update. I bumped my load up by two grs and accuracy improved immensely. I'll get the crony out next week and see what speed their running.

Thanks for the help

[What grain bullets are you using in your P-09]

With factory 115gr ammo my 09 is a tack driver but with anything heavier I can't seem to get any thing close to decent accuracy. What grain bullets are you shooting and how are they for accuracy?

Thanks

Lee

[Zo1 brass ?]

A friend of mine threw a few dozen 9mm ZO1 cases in my bag at our last club shoot. I didn't think anything about it and loaded them up the other night. To my surprise most of them wouldn't fit in my case gage? When I looked at them they looked like belted magnum cases. Anyone have the same issue??

[CZ P09 mag pouches]

I'm using the 773 pouches that I bought for my glocks with my P-09 mags

[Solo 1000 question]

Update, I bought a unigue Tek powder baffle and I polished the powder die and I'm still getting anywhere from 3.64 to 3.8 when I have the it set for 3.7. I have since switched back to N320 and it doesn't vary more than .02 from drop to drop so I'll run that until my supply is gone.

Thanks for all the suggestions and help.

[Solo 1000 question]

I bought mine 4 or 5 years ago. I also shoot a lot of trap and sporting clays and I bought the solo for handicap trap and long range sporting loads.

[Solo 1000 question]

No I did not polish the the powder funnel so I better do that.

This is the same 8 pound jug I've been using. It dose seem a little slow though, I need 3,7grs to make power factor.

[Solo 1000 question]

To Anyone using Solo 1000, do you or did you ever have metering issues with it. I was getting good accuracy with the solo and Bayou bullets 147gr fp in my CZ P09 but now I'm getting some big velocity spreads and my accuracy has gone down the tubes.

Any ideas on what to do other than use up the last of my N320?

[Competition Holster for P-09]

I'm using this http://redfeathergear.com/product/custom-owb-two-tone-holster/. Give Bill a call and he will put what ever belt attachment on that you want.

[147 Precision Bullets, Good Powder / Load]

When I shot precision I used to use W231/HP-38. I was using 3.5 gr with a shorter OAL for my M&P. A friend of mine uses solo 1000, but had to rework the load every time he changed lots.

I use Solo1000 for 9mm. It is fairly soft, affordable, and not much smoke with coated bullets. Once reason I like it is because it is "fluffy" it makes double charging a case impossible to miss.

I have heard that it varies lot to lot, so I usually just buy more at one time.

I'm using Solo as well. With the jug I have I'm loading 3.6gr and it's a soft shooting load.

[VV N320 Smokeless power]

I just paid $42 a pound for N-350. I would LOVE to find some 320.

[New Gamer Load needed 135gr or 160gr?]

If you do a search you will find a lot of loading info in 160's. I've loaded both 147s and 160s with solo and like them both. Right now I'm running 3.5gr of solo under a 147gr Bayou bullet. When the weather gets nicer I'll work up a 160gr/solo load for my P-09.

[IDPA/USPSA mods for P-09 ?]

Thanks for all the Help. I bought a P-09 last Saturday and ordered a upgrade package from CGW on Tuesday. David was very helpful and I can't wait to get working on the 09.

Thanks again

[CGW hammer question]

Does the CWG hammer look different that the one from CZC? as in if I buy a CGW hammer would someone be able to tell it's not a factory part just by looking at it?