scottzerger
-
Posts
41 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by scottzerger
-
-
Hey guys
I have a glock 34 with a wolf aftermarket barrel. I have tried several reloads and cant get any of them to eject.
1. 124gr lead , titegroup w/ 3.8---4.0 grs , Oal 1.10
2. same w231 w/ 4.6---4.8 grs , Oal 1.25
I see no signs of pressure and the recoil is very light. Should i keep increasing the charge until i get ejection? Or
switch to maybe another power like unique
Sorry, I always forget something the gun runs great with factory ammo also with miwall reloads. In fact that barrel is
very accurate even as a single shot. I will try to chrono these loads. When reloads are shot the slide comes back
about half way ?
More input please
-
Hey guys
I have a glock 34 with a wolf aftermarket barrel. I have tried several reloads and cant get any of them to eject.
1. 124gr lead , titegroup w/ 3.8---4.0 grs , Oal 1.10
2. same w231 w/ 4.6---4.8 grs , Oal 1.25
I see no signs of pressure and the recoil is very light. Should i keep increasing the charge until i get ejection? Or
switch to maybe another power like unique
-
Hey guys. This site has helped improve my shooting alot. My thumbs are along the slide and i now index the trigger and the groups have gotten smaller. My next problem is
my groups are in the 8 ring in the 8 oclock position. They knock down steel fine but not
so good for score on paper. Do you have some advice
Scott
Ok , i let my wife shoot the glock and it shot great. I am going to take a hard look at my technique and slow things down. You guys have given me some tools to work with , also
i'll start a shooting log
-
It's probably your sights. Had the same problem with my G22 when I first got it. It's not a flinch, 'cause you wouldn't be grouping them well. If you have a nice tight group and they're just low left then file the front sight a smidge to get the group up and slide the rear sight a smidge to the right.
Rich
ETA: You could also be pulling/steering the gun with your grip.
nah...it's a common problem with shooters new to the Glock. It has a lot to do with the multiple stages of the Glock trigger (it gets harder to pull, in a consistent manner). And, too much grip with the strong hand. You can still shoot pretty good groups.
Easy test. If you think it is the sights, shoot some groups with the off-hand...you'll likely notice the group move to the other side of the target.
[/quot
-
So, you are right handed and shooting low left ?
Hey flex.
Yes , that right . Its a glock 34 others have shot it and found it to be a accurate and dead on pistol. I think that i could be jerking , tightening my grip or my
trigger finger not correct spot. Do any of these sound likely ?
Scott
-
Hey guys. This site has helped improve my shooting alot. My thumbs are along the slide and i now index the trigger and the groups have gotten smaller. My next problem is
my groups are in the 8 ring in the 8 oclock position. They knock down steel fine but not
so good for score on paper. Do you have some advice
Scott
-
"shooting the pistol stage with the M60"
I've got to see that!
It was pretty darn fun! I love that 60 and you will see it along with the other 30 or so mg's we will be bringing again.
alan
[/quote
Hey bluker1 Do you know if jon is still making the dvds? Having trouble reaching him. Got any ideas
Sz
-
Hey Mike . Do you know if Jon is still suppling the dvds for the match? Having a hard time reaching him.
Thxs Scottz
As of this afternoon, April 27, the match is full. We are holding a number of slots for sponsors that may or may not be filled. Therefore, we are creating a waiting list for those slots that are not used by sponsors. If your application is in the mail or in process, your confirmation letter will indicate whether you are in the match or on the waiting list.
If you have not yet submitted your application, but you still want to shoot the match, it is important to get your application in as soon as possible so that you are high on the waiting list.
Also, due to scheduled vacation, jprm3g@aol.com will not be responding for about two weeks commencing Monday, May 2. We will catch up on e-mail upon our return around the 14th.
Michael Field
Asst. Match Director
2005 Rocky Mountain 3-Gun Match
-
Hey George
I understand that its not the guns but if i am using a single stack 45 will i still
be competitive ? Also are the stages 8 or 10 rounds per?
Thanks Just trying to figure out what handgun to buy
Scottz
-
Mr Kelly
Your article on heavy metal has definitely sparked my interest . Now i
have just one question. The rm3g and smm3g matches (HM) limit your 45 to
10 shots. Does that mean glocks and para ords are the primary weapons? Shooting a single stack of 8 equals alot of reloads. Or have i read this wrong?
Thxs Scottz
-
ted
I like that sa trigger pull also hate that da to. Like the
grips but that triggers to wide and i have small hands
so i may put a smooth narrow trigger on it . I shoot a
M15 S&W 38spl alot and had a smooth trig put on and
it made a big difference.
What brand of ammo did/do you use for your 17?
-
Ted
Did you do anything spl to you 17 ? Trigger work
white o/l sights Ect..
Thanks
-
pat
Yes, Thats what i am going to try. My S&W 41
doesn't care to much what i feed it but that 17
fooled me.
Also. which of the above would be a better
bullseye gun? Does anyone Know?
thanks
-
George
Hey, i'll try anything . I felt sense the 17 is a target
model i should at least use target ammo, but its not
cheap. So i'll give the white a try. My next stop was
the gunsmith , its like the dentist for me.
Thanks
-
My S&W won't eject . I have to tap on the ejection rod
to free the shells. The gun is well cleaned and oiled.
I am using long rifle std vel shells ,should i switch to
target ammo?
Scottz
-
Duane thomas
Hey , i found a backissue of G&A handguns magazine.
The article states that they may have fixed the problem
with the hammer pinching the web of the hand. I hope
so.
Magazine date 11-02
Scott
-
loves2shoot
Great idea , one gun for all games. I'll stick to the bhp
and see how much i improve over the next year. This
gun shoots great and points like my old duty revolvers.
Stick to one gun and master it.
Thanks
-
Kurtm
Pacman
I knew that someone out there would have
some better ideas and you guys have em. I going
to check that stuff out now and get back to ya asap.
Thanks Scott.
-
Thanks duane
Now my wife and son want to play . How am i going
to afford this?
Have a good new Year.
Scott
-
Patrick
Duane
I"ll will get those things done.
I was told years ago that the only stupid question
is the one you don't ask. So here goes. If i have the
gun modified will it keep me from shooting 3gun,IDPA
or action pistol at a stock or beginner level ? Also do
i shoot myself now for selling my glock ?
You guys are the best
Thanks
-
Kurtm
Hey, thanks . I'll tell you what i was thinking.
1. New plastic furniture in green or black from
K-var corp. This will add another 1 1/2 " to
the length of pull. The current stock is to
short.
2. A scope mount that clamps on barrel made
by ultimak. Like a scout mount forward of
the receiver.
3. Some sort of red dot scope
I hope this all works
Please feel free to add or subtract any of the above
as i have not bought this stuff Yet.
Love that m1a , but that ammo price ( for the good stuff)
is to high and the AK really likes that Wolf .223 ammo.
I live in Ca and most of the matches we will attend are at club level. If your in SoCal look us up.
Thanks
club leve
-
I have not seen many post for the Ak style rifles to used
in any type of competition. I know that there are much
better choices but i am limited to this an my m1a which is
heavier and cost more to shoot. Is this rifle practical for
3gun shoots and if so what is the best way to set it up?
I live in ca. and i can't move ever.
Thanks
-
Shred
Kimel
Thanks for the encouragement. I found a beginners
action pistol class in palm Springs Ca. that we will all go
to for starters . This will show us some fundamentals
and put us on the right track.
Thanks guys
-
2alpha
Trader
Whiskey
Thank you all for your info. Next month will be the
start of my first match . And i am looking forward to
using the browning for it. I will keep the gun stock
with the exception of some minor de-burring of the
slide release.
Thanks Scott
2009 SMM3G - Mesa, AZ (3/26 > 3/29/2009)
in Multi-Gun, Rifle & Shotgun Match Announcements
Posted
Yes i'm in . Back to the gym and hit the reloader. sz