Cy Soto
-
Posts
1,682 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Cy Soto
-
-
There are some PPC-only matches that require shooting targets at longer distances. I can see the advantage of a bipod in such events but, on most USPSA matches where targets are placed at average distances of 7 to 20 yards, I do not believe that a bipod offers an advantage.
-
I loaded some 115gr bullets over Autocomp thinking that the additional gas would make the compensator of my 16" rifle work for something other that a hood-ornament and I felt no difference. However, it made a positive difference on an AR-9 pistol I own though the recoil was much more noticeable. I quickly went back to using Titegroup.I wonder if anyone shoots a hot enough round that a comp/brake actually comes into play, or would any 9mm round just burn up its powder in 12-14 inches anyway.
Sent from my Nexus 6P using Tapatalk
-
30 minutes ago, MemphisMechanic said:
It does help to pick the correct trigger...
It certainly does! Thus far, I have had good luck with CMC triggers in a couple of AR-9's but I have heard that plenty of people have had triggers break on them.
I am not sure if I have only been lucky or if I have not yet experienced a trigger breakage because of my bolt/buffer combination. I will certainly keep the KE Arms trigger in mind for when the time comes to replace my current setup.
-
46 minutes ago, HoMiE said:
... the added bolt speed would put more force on trigger parts.
That is what I was thinking about. It seems that triggers and trigger pins (in addition to firing pins) are some of the first things to bite the dust.
-
I understand that the reason why shooters remove the bolt weight of their AR-9's is to reduce the weight of the reciprocating mass, therefore, reducing the felt recoil. However, by doing so, are you not also putting more stress on the firearm and hence increasing the risk of damaging it (or, at the very least, breaking parts more often)?
-
4 hours ago, lumberjack149 said:
Both my gen 5's (34 and 17) shoot better than that. They are consistently less than 3" and usually around 2".
I am not saying that this is an overstatement but what I will say is that 2" groups at 25yds are better than what many finely-tuned 1911's are capable of and almost unheard of out of most polymer pistols.
-
I do not believe the break was caused by dry fire as I seldom drop the hammer when I do. The broken firing pin was a product of live fire. I don't know exactly how many rounds fired but, if I had to guess, I would say that it was about 1,500 rounds.Do you dry fire a lot Cy? If so how much?
Sent from my Nexus 7 using Tapatalk
-
On 6/24/2018 at 3:10 PM, ericskennard said:
I have a question......Where do they break?
Is it the tip or shoulder where the thick part turns into the skinny end of the pin?
Here is mine...
-
45 minutes ago, Patrick Scott said:
Where are you getting factory Colt pins? Thanks
Brownell's shows them on their webpage but they are currently out of stock.
I don't know if this is true or internet rumor but I I have read that Colt, CCMG and Wilson firing pins are all manufactured by the same company.
-
38 minutes ago, moonshoxx said:
Does a yone have any insight as to which spare firing pin ahould work with this pcc. Tried to contact lone wolf and they said they no longer support g9 and to call rock river. When i called rock river they were like who told you that lol. Sooooo i am asking the real experts. Thanks??
By the looks of it, that is a "standard" 9mm firing pin. Colt, CMMG & Wilson 9mm rifle firing pins will all work in that bolt.
-
4 minutes ago, jtrump said:
I have a few JP firing pins stashed away for when mine eventually breaks.
JP Firing Pins seem to be made of quality materials. Nonetheless, it appears to only work with their bolt and not other brands.
-
Perusing through the forum brings to light that the black New Frontier firing pins (which I believe are no longer being offered) are the most prone to breakage. I have heard that the standard colt-pattern 9mm PCC firing pins like those made by CMMG and Wilson will last longer though, they too will eventually break. Then there are those firing pins that look different from the "standard" colt-pattern: i.e. Kaw Valley (https://www.kawvalleyprecision.com/Spare-KVP-Gen2-9mm-BCG-Firing-Pin-p/kvp-gen2-9mm-pin.htm) and Taccom (https://taccom3g.com/product/9mm-firing-pin/) but, then again, those do not seem to work with some brands of bolts.
Is there really a difference in the quality of 9mm PCC Firing Pins or do we have to live to live with the fact that, eventually, they all end breaking?
FWIW, what I have right now is a New Frontier Modular Bolt (https://www.joeboboutfitters.com/New-Frontier-Armory-AR-9-Modular-9mm-Bolt-Carrier-p/nfa-ar9-modular-bcg.htm) (which, BTW, NFA is not currently showing on their webpage) with an aftermarket firing pin (I think it was a CMMG but I am not sure). After a few thousand rounds, said pin finally broke. I know I need to have a spare but, if I am going to order a couple, I might as well get the best that the current market has to offer. So, what do you say... In your opinion, what is the best 9mm PCC firing pin in the market right now?
-
So many variables to consider..!
-
I normally reload for my PCC but, the other day, I was feeling lazy and picked up some 9mm 115gr PMC to practice with. The accuracy was excellent and the recoil impulse was nearly non-existent. The only problem was that the rifle felt "sluggish" but, as an "oh shoot I forgot to reload and now I gotta pick up some ammo at Walmart before the match" it was not a bad choice. However, this got me thinking... Is the sluggish recoil impulse typical when shooting slow-burning powders in a PCC?
I ask because this was a far departure from what I am used to when loading with Titegroup. I have never used a slow-burning powder when loading for PCC but I would have expected it to produce more recoil; a sensation of a "long push" instead of the quick "snap" that I get with TG.
-
The original springs that came with my TF basepads worked well for a year or so but it is time to replace them. Are there any other companies (in addition to TF) that offer these long magazine springs? Are there differences in the quality of one brand of springs vs another?
-
I have tried 2.8gr to 4.1gr of Titegroup with several 115gr and 124gr bullets out of two different 16" barrels. The results out of both barrels (velocity and accuracy) were nearly identical. I ended up settling on 3.3gr of Titegroup and 124gr X-Treme plated RN bullets (OAL of 1.155" and Crimped at 0.377").
What I learned was that 115gr bullets (in general) were more accurate; this required 3.8gr of TG. This load produces a sharper recoil impulse and, even though the dot movement was not "severe", it was still more noticeable than using the 3.3gr of TG with 124gr bullets that I use now. Yes, this means that I have to give up a bit of accuracy but this load still produces acceptable results out to 50yds. I will, however, add that if I was shooting an outlaw match that required shooting targets past 50yds, I would switch to shooting 115gr MG JHP which were (in my case) the most accurate bullets I tested.
Bellow is a rested 10-shot group at 50yds using the 115gr MG & 3.8gr TG load. The taped shots were with PMC ammo.
...and this is the 124gr X-Treme with 3.3gr of TG but only at 30yds.
-
Are there any companies who make a 1913 picatinny-style rail mount for the C-More Railway red dot?
The one that comes from the factory is made of the softest aluminum known to man. I'm looking for something better built.
Thanks!!
Sent from my Nexus 6P using Tapatalk
-
1 minute ago, Garmil said:
They make an extension for use on other barrels as well. Added a link above
I had checked on their webpage before and not until you posted that link had I found it. Thank You for the link!!
-
12 minutes ago, Garmil said:
Taccom makes exactly that
That is where I saw it first and, had I not already come across that Faxon barrel, I would purchase the Taccom ULW ramped barrel in a heartbeat. I just happen to find this 4" barrel at an insanely low price.
-
Double Tapped the SUBMIT button...
-
I recently purchased a 4" Faxon 9mm barrel that I would like to use to build a new 16" lightweight upper (I am not interested in building an SBR). I have found barrel extensions of 6" to 8" but, in order to make a legally-pinned/welded 16" barrel, I will need a 12.1" extension or shroud with a 1/2-28 pattern. It would also like it to be as light as possible (aluminum, titanium, etc) because I plan to use a carbon fiber handguard over it.
Is there any company making a 12.1" barrel extension or is this something that I am going to have to resort to a custom built part?
-
In my case, I am lucky to say that I don't shoot at any of these clubs that you mention where you are told how you can and cannot shoot a pistol.CS, you have already been told no. Regardless of what BATFE says, the clubs I shoot at say different. If any extension on a pistol touches any part of the torso, it is a rifle and belongs on that range. All do allow the pistol to be fired on the pistol ranges using the forearm brace, however, it must be manually held against the arm, not strapped on.
As I said earlier, I can always shoot "not for score" and nobody cares if my braced pistol touches my shoulder or not.
Sent from my Nexus 6P using Tapatalk
-
Yes you can, at least per the most recent letter of clarification issued by the BATFE on the subject.You cannot legally (in USA) fire a braced pistol from the shoulder.
Sent from my SPH-L710 using Tapatalk
-
How about shooting "Not For Score," would that be acceptable?
Odin 9mm 16" Super Lite Barrel
in Pistol Caliber Carbine
Posted · Edited by Cy Soto
LOL