Danva Posted January 25, 2010 Share Posted January 25, 2010 Warren, I have one of your .300 pin in fiber sights. Great sight! I want to use a LPA rear sight on my 5" 625. It shoots about 3" high with the rear sight turned all the way down. Have you or can you make a taller front sight for use with this rear? I would guess it would be .330 or .350 tall. Thanks Danva Link to comment Share on other sites More sharing options...
Toolguy Posted January 25, 2010 Share Posted January 25, 2010 Hi Danva! I can make a custom one off for $60.00 + $5.00 shipping. I need to know if it's regular width .125 or skinny width .100, color of fiber, how many yards out is it 3" high and where to ship to. It will take a couple of weeks or so, I'm really buried right now and my hot blue guy only blues one day a week. Let me know what you want to do. Best Regards - Warren Link to comment Share on other sites More sharing options...
Danva Posted January 25, 2010 Author Share Posted January 25, 2010 Sorry -- it shoots about 3" high at 25yrds I will need your help figuring best hieght It is good you are busy as this will give me time to raise funds Dan C Link to comment Share on other sites More sharing options...
Toolguy Posted February 2, 2010 Share Posted February 2, 2010 Around .340 to .350 would be about right for a 6" barrel. I forgot to ask the barrel length. Link to comment Share on other sites More sharing options...
Danva Posted February 11, 2010 Author Share Posted February 11, 2010 Warren, It is a 5" barrel. I measured the front sight I currently have and it measures .280" from the top of the gun rib to the top of the sight. Would a stock .300" sight help any or do I still need to go taller? Thanks Dan C Around .340 to .350 would be about right for a 6" barrel. I forgot to ask the barrel length. Link to comment Share on other sites More sharing options...
LPatterson Posted February 11, 2010 Share Posted February 11, 2010 Danva, I have a 5" 625 with one of Warren's .300 X .100 sights with a LPA rear. The rear blade where the windage screw is is even with the bottom line on the side of the sight. 230gr MG @ ~ 740FPS 25 yard zero. Link to comment Share on other sites More sharing options...
Toolguy Posted February 11, 2010 Share Posted February 11, 2010 Danva- A .300 should just get you where you want to be. LPatterson - Thanks for the assistance! I don't have an LPA sight so I don't know the particulars on them. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now