Jump to content
Brian Enos's Forums... Maku mozo!

Press Through Sizer on a Budget

Recommended Posts

Interesting idea. A used arbor press could probably be had fairly cheap too. And pushing the brass down into a bucket looks like a pretty slick improvement.

It looks as if he is pushing the brass through a Lee .40 sizing die that has had the "top" cut off so that the ram will push the brass through completely. And I'm guessing the ram is out of a Lee cast bullet sizing kit.

Makes me wonder if you could take a RCBS push through die kit and mount it the same way in an arbor press.

Link to comment
Share on other sites


I made this modification today. It seems to have a lot more stability than the 550B toolhead and is less pick about positioning. I left it free floating so it can be easily removed if there is a problem and have some element of self centering. As always, PM wme with any questions.


Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...