Sumtoc Posted December 23, 2009 Share Posted December 23, 2009 Considering a FN SLP Mk1 for Open 3 Gun but can't seem to confirm that Tecloaders can be used with this SG. I know it seems fairly new but is anybody selling the bracket or other mod to use the loaders? Thought about a Saiga but would like one SG that I can use for both Open and Tactical. With the FN I should be able to pull off the optic for Tactical and be good to go right? Thanks! Link to comment Share on other sites More sharing options...
TRUBL Posted December 23, 2009 Share Posted December 23, 2009 Yes they can.....but you need to modify a remington bracket to make it work. Tim Link to comment Share on other sites More sharing options...
Sumtoc Posted December 23, 2009 Author Share Posted December 23, 2009 Thanks, can you describe the changes needed? Any 'smiths do this work and if so how much? Link to comment Share on other sites More sharing options...
cold Posted December 23, 2009 Share Posted December 23, 2009 (edited) I know 00bullitt modified a FN SLP Mk1 to work with speed loaders but I am not sure what exactly he did. Im sure he will come along and explain it. I watched the guy who he modified the gun for shoot it at FB3G and the mods worked well from what I could see. Edited December 23, 2009 by cold Link to comment Share on other sites More sharing options...
00bullitt Posted December 23, 2009 Share Posted December 23, 2009 We tried the Remington Arredondo bracket first. It worked OK and required lots of modification and welding. We then tried the Benelli Arredondo bracket and it worked with minimal modification and worked much better. It basically required just drilling a new hole. I asked him to post some pics and do a write up and explanation of the mods. I will forward this link to him. Link to comment Share on other sites More sharing options...
FLG8R Posted December 24, 2009 Share Posted December 24, 2009 Considering a FN SLP Mk1 for Open 3 Gun but can't seem to confirm that Tecloaders can be used with this SG. I know it seems fairly new but is anybody selling the bracket or other mod to use the loaders?Thought about a Saiga but would like one SG that I can use for both Open and Tactical. With the FN I should be able to pull off the optic for Tactical and be good to go right? Thanks! Don't forget the change in tube capacity as well! Link to comment Share on other sites More sharing options...
Sumtoc Posted December 24, 2009 Author Share Posted December 24, 2009 Considering a FN SLP Mk1 for Open 3 Gun but can't seem to confirm that Tecloaders can be used with this SG. I know it seems fairly new but is anybody selling the bracket or other mod to use the loaders?Thought about a Saiga but would like one SG that I can use for both Open and Tactical. With the FN I should be able to pull off the optic for Tactical and be good to go right? Thanks! Don't forget the change in tube capacity as well! The gun holds 8+1 out of the box, isn't that Ok for tactical? Or are you suggesting a tube extension for Open that needs to be removed for tactical? Link to comment Share on other sites More sharing options...
FLG8R Posted December 24, 2009 Share Posted December 24, 2009 Considering a FN SLP Mk1 for Open 3 Gun but can't seem to confirm that Tecloaders can be used with this SG. I know it seems fairly new but is anybody selling the bracket or other mod to use the loaders?Thought about a Saiga but would like one SG that I can use for both Open and Tactical. With the FN I should be able to pull off the optic for Tactical and be good to go right? Thanks! Don't forget the change in tube capacity as well! The gun holds 8+1 out of the box, isn't that Ok for tactical? Or are you suggesting a tube extension for Open that needs to be removed for tactical? 8+1 and you're good to go for tactical. Most in Open set up with the ability to carry much more in their tubes, so yes, i was referring to the need to change the tube if set up to load more than that. Link to comment Share on other sites More sharing options...
Sumtoc Posted December 30, 2009 Author Share Posted December 30, 2009 Bump to see if we can get the details about the Benelli bracket..... Thanks guys! Link to comment Share on other sites More sharing options...
rino451 Posted January 8, 2010 Share Posted January 8, 2010 Nother bump for info... Link to comment Share on other sites More sharing options...
1pcr99 Posted February 22, 2010 Share Posted February 22, 2010 Would really like to see a picture and a description of what was done to get a Benelli bracket to work on an FN. Link to comment Share on other sites More sharing options...
Space Cowboy Posted August 29, 2010 Share Posted August 29, 2010 Would really like to see a picture and a description of what was done to get a Benelli bracket to work on an FN. Another bump from another curious shooter.. Link to comment Share on other sites More sharing options...
Pro2AInPA Posted August 29, 2010 Share Posted August 29, 2010 I want to know as well . . . Link to comment Share on other sites More sharing options...
GorillaTactical Posted August 30, 2010 Share Posted August 30, 2010 I want to know as well . . . YES PLEASE. HIGHLY INTERESTED Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now