samdraper Posted December 9, 2009 Share Posted December 9, 2009 New to IDPA and USPSA. I reload. Pistol is M&P 9 Pro. Does the group have recommendations for bullets, powder, and loads? I have Berry 115 gr RN plated bullets, Titegroup powder, Federal primers, and Lee Classic Terret press. Thank you! Sam Draper Link to comment Share on other sites More sharing options...
Sarge Posted December 9, 2009 Share Posted December 9, 2009 (edited) Welcome. All your components sound OK. I think you will find most 9mm minor shooters run a little heavier bullet but 115's will work. TG is a pretty common powder for the 9mm. I would encourage you to set aside some time and start reading the 9mm reloading section of the forum. The common loads will present themselves soon enough. Forgot to add that I shoot the PRO as well. It is a great production piece. You made a pretty good choice. Edited December 9, 2009 by sandman Link to comment Share on other sites More sharing options...
CJDOUBLETAP Posted December 9, 2009 Share Posted December 9, 2009 I like the feel of 115grn. bullets, they cycle the slide nice and fast, and give the gun a good snappy feel. Try about 4.5 grains of Tite Group, that should be around 125 power factor. 1.130 OAL works good for most 9mm's. Good luck! Link to comment Share on other sites More sharing options...
LPatterson Posted December 9, 2009 Share Posted December 9, 2009 I like 124-125gr bullets and hate TiteGroup. Saving 4# for 4th of July. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now