30 carbine laser cast and plated

[hiropro]

since the chance of getting a resupply on FMJs is slim now I must dip into these.

Problem is I cant find data anywhere for these.

Have any of you loaded these?

My powder of choice and supply is 296 and I really wnat to use this since I have 12# of it

thanks

[Tattoo]

since the chance of getting a resupply on FMJs is slim now I must dip into these.

Problem is I cant find data anywhere for these.

Have any of you loaded these?

My powder of choice and supply is 296 and I really wnat to use this since I have 12# of it

thanks

I read an article in an issue of Handloaded an issue or two ago that had a big write-up on just this subject. I can see if I can find it. If you can find it, its the issue with a carbine on the cover maybe two issues back. I think this was only on lead though. The plated may not

work at carbine speeds. Too fast and it rips off the plating. 296 is my powder of choice too. Good luck

T

[hiropro]

Tatto I called everybody I know to see if they have a copy of it and no dice. If you could dig it up for me I owe you a beer if you are ever in Reno.

thanks

[Yardbird]

The Laser-Cast manual says,

115 RN

296

Start 13.0 gr

1779 fps

Max 14.0 gr

1865 fps

OAL 1.660