Alan Adamson Posted March 10, 2009 Share Posted March 10, 2009 Just saw that the board rulings are out... in the members area of the uspsa site. dunno if it was finalized or just put out for comments... appears most will be happy... Alan Link to comment Share on other sites More sharing options...
Rob Boudrie Posted March 10, 2009 Share Posted March 10, 2009 They will be effective after a comment period. Link to comment Share on other sites More sharing options...
vluc Posted March 10, 2009 Share Posted March 10, 2009 Thanks to all who worked on it and came up with something for us to look at! Link to comment Share on other sites More sharing options...
eerw Posted March 10, 2009 Share Posted March 10, 2009 thanks for all the hard work.. Link to comment Share on other sites More sharing options...
Fireant Posted March 10, 2009 Share Posted March 10, 2009 I just finished reading it and my head hurts and is spinning. I'm still not sure if my CZ is legal or not. Anyone know what a firing pin block is supposed to look like and where it might be in the gun? Link to comment Share on other sites More sharing options...
eerw Posted March 10, 2009 Share Posted March 10, 2009 I just finished reading it and my head hurts and is spinning. I'm still not sure if my CZ is legal or not. Anyone know what a firing pin block is supposed to look like and where it might be in the gun? in the slide..lock back the slide and look at the underside. if there is a big hole there..it has been taken out. easy enough to resintall and polish up Link to comment Share on other sites More sharing options...
Loves2Shoot Posted March 10, 2009 Share Posted March 10, 2009 I just finished reading it and my head hurts and is spinning. I'm still not sure if my CZ is legal or not. Anyone know what a firing pin block is supposed to look like and where it might be in the gun? in the slide..lock back the slide and look at the underside. if there is a big hole there..it has been taken out. easy enough to resintall and polish up I have a pile of them if you don't have one. Link to comment Share on other sites More sharing options...
Fireant Posted March 10, 2009 Share Posted March 10, 2009 I guess I need one. I just checked and yep, there's a big hole there. I'm guessing that all the CZ75 variants had a block to start with? Angus might need to order up a batch, or maybe he kept all the ones he removed. Link to comment Share on other sites More sharing options...
ChuckS Posted March 10, 2009 Share Posted March 10, 2009 I just finished reading it and my head hurts and is spinning. I'm still not sure if my CZ is legal or not. Anyone know what a firing pin block is supposed to look like and where it might be in the gun? Look on the parts diagram. Parts 14, 15 and 58 & 59. If you don't have a manual go here: http://www.cz-usa.com/support_downloads.php Later, Chuck Link to comment Share on other sites More sharing options...
ChuckS Posted March 10, 2009 Share Posted March 10, 2009 I guess I need one. I just checked and yep, there's a big hole there. I'm guessing that all the CZ75 variants had a block to start with? Angus might need to order up a batch, or maybe he kept all the ones he removed. Be sure to get the little lever that goes into the sear block. The normal mod is to grind down the lever so it no longer interacts with the trigger so the trigger reset is much shorter. The added force of the FPB is not all that great but the trigger reset is going to change for the longer... (I may of gotten the terminology wrong, sorry) Later, Chuck Link to comment Share on other sites More sharing options...
splashdown Posted March 10, 2009 Share Posted March 10, 2009 OK, something I was wondering, as an RO. Can a guy shoot a Glock 19 with Glock 17 mags? If the G17 fits the box, so will this combo. I don't see anything against it in the rule book other than "must fit the box". However, under the Production Division FAQ, #18 says " all magazines must be dimensionally the same as the original magazine for that model gun." Where does that quote come from? Is that an official ruling? Thanks for working so hard on this Bruce, et al. I didn't mean to start shooting holes in it this early on. Link to comment Share on other sites More sharing options...
Flexmoney Posted March 10, 2009 Share Posted March 10, 2009 It looks like we are only seeing questions on Production rules. Since we have a thread going on that, I am going to close this one. Please ask your Production division questions on the other thread. Link to comment Share on other sites More sharing options...
Recommended Posts