Jump to content
Brian Enos's Forums... Maku mozo!
Protocall Design

Custom S&W revolver front and rear sights-LOCKED DUE TO LENGTH

Recommended Posts

Hope this is not too late. I am ready to order/pay for:

1

Classic Patridge

Green Fiber Optic

.300 Tall

Thanks, Chris

Share this post


Link to post
Share on other sites

Yes - I will have more than just what was ordered. I have to make these is production runs. One at a time, they would be about

$90.00 each. You can start sending payments now. As soon as they are done I'll ship to the payments received. Be sure to

include shipping address and preferably phone # in case I have a question about what you want. Thanks to all! Warren

Edited by Toolguy

Share this post


Link to post
Share on other sites

Updated for mwx40x40 & festus1 orders. Also updated status - we plan to have this run completed by 3/14. Now ready to accept payments.

Share this post


Link to post
Share on other sites
Updated for mwx40x40 & festus1 orders. Also updated status - we plan to have this run completed by 3/14. Now ready to accept payments.

I will take a plain black .300 Classic. What number do I call for CC order? I did not see one listed.

Share this post


Link to post
Share on other sites

I would like 1ea, 100 wide, pin on, green F/O, 250 tall.

Also is there a phone number for CC payment and shipping instructions?

Thanks.

Share this post


Link to post
Share on other sites

THANKS for answering my Question! Now, I've come up with ANOTHER...Don'tcha' just LOVE Questions???...I REALLY LIKE the .100-in. width Front Sight with the .125-in. wide "Factory" rear sight notch on FOUR-INCH guns...seems like I see a lil' TOO MUCH "Light" on either side of the front sight when using the .100-in. wide Front Sight on LONGER Barrels, so...

Have you given any thought to making the Front Sight Blades with an "Intermediate" Width--like .110 in. to .115 in.??? That'd be the "Cat's Meow"--at least FOR ME--on Five-inch to Six-and-a-half inch barrels, when used with the "Factory" width rear sight notch(es). Thanks!....mikey357

Yes - the bottom part of the Pin-On and Classic are both .125 wide, then the blade part that you see thru the rear notch is .100 wide,

centered on the .125 part. That's why no one else wants to do them - too much work. Good question.

Edit to add - Should have the first run ready in a week or so.

Share this post


Link to post
Share on other sites

Once I get the .100s out the door and see how that goes, I might think about doing custom widths for a small additional fee.

Edited by Toolguy

Share this post


Link to post
Share on other sites

COOL!!!...I'll be lookin' out for THAT...and THANKS for getting to the Question so FAST....mikey357

One I get the .100s out the door and see how that goes, I might think about doing custom widths for a small additional fee.

Share this post


Link to post
Share on other sites
Updated for mwx40x40 & festus1 orders. Also updated status - we plan to have this run completed by 3/14. Now ready to accept payments.

I will take a plain black .300 Classic. What number do I call for CC order? I did not see one listed.

When will this order go out?

Share this post


Link to post
Share on other sites

These are going to be finished machining sometime tonight. They will then get deburred tomorrow and hot blued next week,

possibly as soon as Monday. As soon as they are blued or blued and fibers installed, they will go out. I have made several of

each kind, so subsequent orders can be shipped in a more timely manner. This project turned out to be more than I had

planned on. For those who were on the original order, thanks for your faith in me and your patience. I have worked very hard

to make a first quality target grade sight. Best Regards- Warren

Edited by Toolguy

Share this post


Link to post
Share on other sites

Update - My bluing guys blue Thurs. , will get them back and ship Friday. Thanks all. Best Regards - Warren

Share this post


Link to post
Share on other sites

I'd like to order a front sight for a S&W Model 22 Thunder Ranch. Front sight is pinned, I do not know the exact height needed.

Share this post


Link to post
Share on other sites

Hi Shadow-

We'll get it figured out and get you fixed up.

Share this post


Link to post
Share on other sites

All orders are ready. Don't have payment or ship to info for most. I'm shipping to those I can find. If you haven't sent

payment please do so. Phone - 913-422-8966. Address - 8317 Lewis Drive Lenexa, KS 66227.

Share this post


Link to post
Share on other sites
COOL!!!...I'll be lookin' out for THAT...and THANKS for getting to the Question so FAST....mikey357
One I get the .100s out the door and see how that goes, I might think about doing custom widths for a small additional fee.

Mikey357 - tell me what you want. Custom widths are $50.00 black, $55.00 F/O + $5.00 shipping.

Share this post


Link to post
Share on other sites

Got my sight today and it looks great.

Thanks, Warren!

Share this post


Link to post
Share on other sites
Got my sight today and it looks great.

Thanks, Warren!

+1. Got mine too. Looks great. Can't wait to test drive it.

Share this post


Link to post
Share on other sites

Got mt sight today as well.... they look really nice but alas, I bought the wrong one. I thought since my 625 had a pin in the front that I needed the pinned one as was wrong, looks like I needed the classic one. :wacko:

Share this post


Link to post
Share on other sites

Thanks for the feedback Guys! Let me know how it goes once you start using them.

Share this post


Link to post
Share on other sites

Hi Warren,

Carmoney referred me to you.

I have a S&W 629 "Trail Boss." It has the 3"bbl and MagnaPorting. My problem is I keep melting the plastic insert on the front sight.

I found the pin holding the ramp on, it's about 1/3 from the back of the blade.

I want an all black sight to replace the factory one, preferably a little thinner but the same height. I don't much care if it is a ramp or partridge type.

I teach at Front Sight where speed and accuracy are job requirements, but almost no instructors carry revolvers. Do you have what I need in stock or can you refer me to the right place? I have decent mechanical skills and few tools, so the simpler the better.

Thanks,

John

--------------------

"All right, they're on our left, they're on our right, they're in front of us, they're behind us...they can't get away this time"

- Lewis B. "Chesty" Puller, USMC

Share this post


Link to post
Share on other sites

ARE FRONT SIGHTS STILL AVAILABLE?

LOOKING AT THE PIN ON CLASSIC IN BLACK OR F O

Share this post


Link to post
Share on other sites

Hi John-

Give me a call at 913-422-8966 so I can determine exactly what you need. I probably have it in stock right now.

Hi Danva-

Sights are in stock ready to ship. Call or email with details. T

Thanks Guys!

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×