spencerhut Posted February 2, 2009 Share Posted February 2, 2009 My wife's CZ-75B SA was sent to CZ for trigger job and since she got it back we've been getting intermittent lite strikes. She can re-cock the gun and get them to go off on the second or third try, but I'd like to just swap the spring out and be done with it. What weight CZ-75 main/hammer spring will reliably set off CCI primers? 15lb? Link to comment Share on other sites More sharing options...
Hannu Posted February 2, 2009 Share Posted February 2, 2009 My SP-01 Shadow has 13 lbs mainspring from Angus. Have never had any malfunctions with CCI #500 primers or any other brand. In SA gun mainspring has little to do with trigger pull weight. Put 15-16 lbs spring if you feel the problem is mainspring. Link to comment Share on other sites More sharing options...
nwb01 Posted February 2, 2009 Share Posted February 2, 2009 factory ammo or reloads ?? If reloads, check for high primers. Link to comment Share on other sites More sharing options...
eerw Posted February 2, 2009 Share Posted February 2, 2009 a full 13# or 15# mainspring should set off everything.. I'm running a 15# clipped two coils in one gun and it'll run Speer Lawman ammo perfectly. my other one with a 13# clipped need a little more tweaking..but it will set off everything now too. Link to comment Share on other sites More sharing options...
spencerhut Posted February 2, 2009 Author Share Posted February 2, 2009 factory ammo or reloads ?? If reloads, check for high primers. Thanks, but the ammo is not the issue. Link to comment Share on other sites More sharing options...
spencerhut Posted February 2, 2009 Author Share Posted February 2, 2009 My SP-01 Shadow has 13 lbs mainspring from Angus. Have never had any malfunctions with CCI #500 primers or any other brand.In SA gun mainspring has little to do with trigger pull weight. Put 15-16 lbs spring if you feel the problem is mainspring. Good info, I've got several main springs and did not want to ruin the trigger pull by putting something too stiff in it. I'll go ahead and try a 15 or 16lb and see if it helps. Thank You. Link to comment Share on other sites More sharing options...
Duane Thomas Posted February 3, 2009 Share Posted February 3, 2009 Thanks, but the ammo is not the issue. How do you know that, just out of curiosity? Link to comment Share on other sites More sharing options...
19852 Posted February 3, 2009 Share Posted February 3, 2009 (edited) About four years ago I sent my CZ to Angus for conversion to SA only. It came back with a very light trigger, awesome! But I got the light strikes as you described. I switched to a 16lb hammer spring and the problem went away. Later I went to a 18lb spring to increase the pull weight. Edited February 3, 2009 by 19852 Link to comment Share on other sites More sharing options...
Duane Thomas Posted February 3, 2009 Share Posted February 3, 2009 Very light triggers usually come with a caveat: use Federal primers only. Link to comment Share on other sites More sharing options...
spencerhut Posted April 23, 2010 Author Share Posted April 23, 2010 Back from the dead with what really happened. Turns out the over travel screw was the problem. If you adjust the over travel screw just a little bit too far in it will prevent the firing pin block from fully retracting. So we had to choose between a good reset and or consistent firing. Guess what we choose? Link to comment Share on other sites More sharing options...
eerw Posted April 23, 2010 Share Posted April 23, 2010 Back from the dead with what really happened. Turns out the over travel screw was the problem. If you adjust the over travel screw just a little bit too far in it will prevent the firing pin block from fully retracting. So we had to choose between a good reset and or consistent firing. Guess what we choose? glad the problem got solved. overtravel or pretravel? seems like it would the pretravel adjustment keeping the triggerbar from coming forward enough to pick up the FPB lever. just curious Link to comment Share on other sites More sharing options...
spencerhut Posted April 23, 2010 Author Share Posted April 23, 2010 Back from the dead with what really happened. Turns out the over travel screw was the problem. If you adjust the over travel screw just a little bit too far in it will prevent the firing pin block from fully retracting. So we had to choose between a good reset and or consistent firing. Guess what we choose? glad the problem got solved. overtravel or pretravel? seems like it would the pretravel adjustment keeping the triggerbar from coming forward enough to pick up the FPB lever. just curious I may be using the incorrect terminology. The very small allen head screw you can see in the trigger. I've always heard them referred to as over travel screws on 1911's. Just assumed CZ called them the same thing. Link to comment Share on other sites More sharing options...
eerw Posted April 23, 2010 Share Posted April 23, 2010 Back from the dead with what really happened. Turns out the over travel screw was the problem. If you adjust the over travel screw just a little bit too far in it will prevent the firing pin block from fully retracting. So we had to choose between a good reset and or consistent firing. Guess what we choose? glad the problem got solved. overtravel or pretravel? seems like it would the pretravel adjustment keeping the triggerbar from coming forward enough to pick up the FPB lever. just curious I may be using the incorrect terminology. The very small allen head screw you can see in the trigger. I've always heard them referred to as over travel screws on 1911's. Just assumed CZ called them the same thing. nope you got it..that's the overtravel adjustment. the pretravel adjustment is at the top of the trigger and is accessed through the frame. Link to comment Share on other sites More sharing options...
lll Otto lll Posted June 27, 2010 Share Posted June 27, 2010 Turns out the over travel screw was the problem. If you adjust the over travel screw just a little bit too far in it will prevent the firing pin block from fully retracting. So we had to choose between a good reset and or consistent firing. Guess what we choose? You could have chosen to remove the firing pin block which also shortens the trigger reset and makes for a crisper feel. Angus does this on request with a written request/waiver from the customer. Link to comment Share on other sites More sharing options...
CocoBolo Posted June 27, 2010 Share Posted June 27, 2010 My wife's CZ75 B has a 15# main spring and it sets off CCI, MagTec, Win, and Federal primers reliably. She uses MecGar mags exclusely and they all work. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now