Jump to content
Brian Enos's Forums... Maku mozo!
Sign in to follow this  
shoot

Adjustment lever for scope

Recommended Posts

Does anyone know where I could find a universal adjustment lever for attachment to a scope adjustment ring.

Is anyone using something along these lines for fast transitions to longer range shots? I'm using a Millett Tactical DMS-1 on an bushmaster AR-15 flat top

Edited by shoot

Share this post


Link to post
Share on other sites

I know some folks who made their own - at least one posted it here on the forum.

Another got some basic parts from Lowe's and cobbled a nice workable dongle together. Try it.

Share this post


Link to post
Share on other sites

+1 on R&R Racing. I talked to Robert at Area 1, and he said that he had one to fit the DMS-1.

Share this post


Link to post
Share on other sites

Talked to Robert and R&R racing is working on the DMS-1 throw lever.

It sure makes sense

Share this post


Link to post
Share on other sites

Let us know when he has them ready. I also have a Millett and wouldn't mind such a critter tail to change power.

Craig

Share this post


Link to post
Share on other sites
LaRue is making them for the Leupold Mk 4's.

Is it on their web site yet ??? I looked around and couldn't find it. Thanks.

Share this post


Link to post
Share on other sites

RandRRacingonline.com now has the throw levers for the following scopes while supplies last:

Leupold CQT

Leupold MK 4

Burris 1-4

Millet 1-4

Night Force 1-4

Trijicon Accupoint

Swarovski 1-6

Meopta 1-4

That is all for now, I believe LaRue is making some too but for the life of me I can't find it on his site.

Share this post


Link to post
Share on other sites

CPWSA has the IHT throw levers in stock for the Burris XTR, Meoptka K dot, Leupold 1.5x5, and Millett DMS. Click the link below:

IHT throw levers at CPWSA

Edited by cpty1

Share this post


Link to post
Share on other sites

For the Burris, since you can grab the entire eyepiece and turn it, put some skateboard tape around it. I saw it on Benny's AR and it was so simple, but works great. Had one of those "dang, why didn't I think about that" moments.

Share this post


Link to post
Share on other sites
For the Burris, since you can grab the entire eyepiece and turn it, put some skateboard tape around it. I saw it on Benny's AR and it was so simple, but works great. Had one of those "dang, why didn't I think about that" moments.

Thanks - good tip!

(And a "why didn't I think off that" moment for me too.)

Share this post


Link to post
Share on other sites

LaRue had some scope levers on the prize table at the LaRue match last month. I did not look real close as to what they fit.

Share this post


Link to post
Share on other sites

I've got a Cat Tail from a forum sponsor here for my DMS-1 and love it. Check out This Forum Dealer and give him a shot, you can't go wrong with one of Charlie Drissel's Cat Tails:

IMG_4327.jpg

IMG_4329.jpg

IMG_4332.jpg

IMG_4334.jpg

Share this post


Link to post
Share on other sites

We currently have them for Millet DMS, Burris XTR, , Trijicon Accupoint, Leupold VX-II and VX-III, Leupold Mark 4 CQ/T, Nightforce NXS, Schmidt & Bender Short Dot and 5-25X56 PM II, and Weaver Classic.

Coming soon we will have:

Leupold Mark 4, Meopta K-Dot, Nightforce NXS Compact, & Schmidt & Bender 3-12X50 PM II

If you have questions about these feel free to contact me.

Share this post


Link to post
Share on other sites
LaRue had some scope levers on the prize table at the LaRue match last month. I did not look real close as to what they fit.

I was fortunate to pick one up with the SPR-E mount. Designed for the Leupold Mark 4 line. Works great on my 1.5-5x. Try calling them directly.

Share this post


Link to post
Share on other sites
We currently have them for Millet DMS, Burris XTR, , Trijicon Accupoint, Leupold VX-II and VX-III, Leupold Mark 4 CQ/T, Nightforce NXS, Schmidt & Bender Short Dot and 5-25X56 PM II, and Weaver Classic.

Coming soon we will have:

Leupold Mark 4, Meopta K-Dot, Nightforce NXS Compact, & Schmidt & Bender 3-12X50 PM II

If you have questions about these feel free to contact me.

Chris should have a limited number of my two new models soon.

3GunStuff.com

S&B PMII 3-12x50 (small bumps)

SBS1.jpg

Leupold MK4 (1.5-5x20mm illum)

LMK41.jpg

:cheers:

Share this post


Link to post
Share on other sites

Current list to date of the models I now make:

Burris XTR-14 1-4x24

Leupold MK4 CQ/T

Leupold MK4 (1.5-5x20 illum, 3.5-8x36 MR/T illum)

Leupold Vari-X III (1" & 30mm, 3-9x50 30mm European)

Leupold VX II 1-4x20mm

Meopta K-Dot (1-4x22 RD)

Millett (1-4x24 DMS-1)

NightForce NXS 1-4x24 (Compact)

NightForce NXS (Full Size)

S&B (PMII 3-12x50 small bumps)

S&B (ShortDot, 5-25x56 PMII large bumps)

Trijicon AccuPoint TR21, TR22, TR24

Weaver Classic V-3 1-3x20mm

:cheers:

Share this post


Link to post
Share on other sites
Current list to date of the models I now make:

Burris XTR-14 1-4x24

Leupold MK4 CQ/T

Leupold MK4 (1.5-5x20 illum, 3.5-8x36 MR/T illum)

Leupold Vari-X III (1" & 30mm, 3-9x50 30mm European)

Leupold VX II 1-4x20mm

Meopta K-Dot (1-4x22 RD)

Millett (1-4x24 DMS-1)

NightForce NXS 1-4x24 (Compact)

NightForce NXS (Full Size)

S&B (PMII 3-12x50 small bumps)

S&B (ShortDot, 5-25x56 PMII large bumps)

Trijicon AccuPoint TR21, TR22, TR24

Weaver Classic V-3 1-3x20mm

:cheers:

Just got some of these for me and my friends. They look like they belong there, not added on.

Great product.

Craig

Share this post


Link to post
Share on other sites
RandRRacingonline.com now has the throw levers for the following scopes while supplies last:

Leupold CQT

Leupold MK 4

Burris 1-4

Millet 1-4

Night Force 1-4

Trijicon Accupoint

Swarovski 1-6

Meopta 1-4

That is all for now, I believe LaRue is making some too but for the life of me I can't find it on his site.

Have one on my Burris & works great...

Share this post


Link to post
Share on other sites

Just ordered one for my Meopta Meostar R1.

It arrived in around 3 days...and it is sweeeeeeeet!

Fits it like a glove.

But make sure you measure everything correctly BEFORE you order the scope mounts!

In Christ: Raymond

Share this post


Link to post
Share on other sites
Current list to date of the models:

Burris XTR-14 1-4x24

Leupold MK4 CQ/T

Leupold MK4 (1.5-5x20 illum, 3.5-8x36 MR/T illum)

Leupold Vari-X III (1" & 30mm, 3-9x50 30mm European)

Leupold VX II 1-4x20mm

Meopta K-Dot (1-4x22 RD)

Millett (1-4x24 DMS-1)

NightForce NXS 1-4x24 (Compact)

NightForce NXS (Full Size)

S&B (PMII 3-12x50 small bumps)

S&B (ShortDot, 5-25x56 PMII large bumps)

Trijicon AccuPoint TR21, TR22, TR24

Weaver Classic V-3 1-3x20mm

NEW models

IOR PitBull

Leupold MK AR

Leupold MK4 (non-illum)

:cheers:

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...