MichaelD Posted October 11, 2002 Share Posted October 11, 2002 Does anyone have a source for full moon clip loaders. Seems like there are many unloaders (demooners) but no loaders (mooners...sorry). I am particulalry loking for loaders for 8-shot S&W. Link to comment Share on other sites More sharing options...
Thomas Moore Posted October 11, 2002 Share Posted October 11, 2002 if they're too difficult to install by hand try a pair of plyers. Link to comment Share on other sites More sharing options...
eerw Posted October 11, 2002 Share Posted October 11, 2002 go to moonclips.com tk custom...they have a bunch of revolver items..I think they have a loader ...also a cool double pouch.. Link to comment Share on other sites More sharing options...
spook Posted October 15, 2002 Share Posted October 15, 2002 for holders, use california competition works holders. they're very fast. I think Jerry Miculek uses them too. They can be ordered at Dillon. Link to comment Share on other sites More sharing options...
jmorris Posted February 6, 2006 Share Posted February 6, 2006 I couldn’t post the video but here’s a pic of my semi-auto moon loader. Link to comment Share on other sites More sharing options...
haras Posted February 7, 2006 Share Posted February 7, 2006 Yep, go to TK custon and get a Moonsetter. Love mine. Link to comment Share on other sites More sharing options...
AzShooter Posted February 7, 2006 Share Posted February 7, 2006 I've got an engineer friend that is into gattling guns that is working on a moon loader/unloader for me. He says the sample should be ready in a few weeks and I'll let everyone know what it's like. This will be for the eight rounders. I like the simplicity of Imorris's loader Link to comment Share on other sites More sharing options...
michaels Posted February 7, 2006 Share Posted February 7, 2006 I couldn’t post the video but here’s a pic of my semi-auto moon loader. I've looked at this thing, but I can't quite figure it out...kinda looks like a jihad zip gun... michaels Link to comment Share on other sites More sharing options...
alellis Posted February 7, 2006 Share Posted February 7, 2006 I couldn’t post the video but here’s a pic of my semi-auto moon loader. Have you any more info on those. This is what I use. https://www.moonclips.com/cart/shopdisplayp...40+S%26W%2F10mm al Link to comment Share on other sites More sharing options...
Round_Gun_Shooter Posted February 7, 2006 Share Posted February 7, 2006 This is what I use. with different center pieces, I can load six or 8 shot. Link to comment Share on other sites More sharing options...
jmorris Posted February 7, 2006 Share Posted February 7, 2006 I made the loader a year or so ago, the feed tube is 4130 chromemoly and machined so it will de-moon also. You load the rounds into the feed tube and squeeze to set the round let loose and the next round drops. It will load a clip in 6 seconds. PM me and I’ll email the video. Link to comment Share on other sites More sharing options...
Cuz Posted February 8, 2006 Share Posted February 8, 2006 This is what I use. with different center pieces, I can load six or 8 shot. I've never seen that one anywhere. What kind is it? -Cuz. Link to comment Share on other sites More sharing options...
Round_Gun_Shooter Posted February 8, 2006 Share Posted February 8, 2006 This is what I use. with different center pieces, I can load six or 8 shot. I've never seen that one anywhere. What kind is it? -Cuz. You don't get out much do ya Middleboro Gun Shop, Middleboro, MA. Not too far from you. Regards, Link to comment Share on other sites More sharing options...
justicentyme Posted February 13, 2006 Share Posted February 13, 2006 Easily made lmooner and demooner are seen here: http://www2.tnweb.com/justicentyme/S&W/646.htm JNT Link to comment Share on other sites More sharing options...
AzShooter Posted February 13, 2006 Share Posted February 13, 2006 Justice Super photos. Thanks for sharing. Yeah, a pliers makes a great moon tool. Good close up photography. Now everyone knows what to do with those bottom feeders, take the barrel out and use it for something good. Link to comment Share on other sites More sharing options...
jmorris Posted February 14, 2006 Share Posted February 14, 2006 (edited) looks like it will work Edited February 14, 2006 by jmorris Link to comment Share on other sites More sharing options...
zip308 Posted February 17, 2006 Share Posted February 17, 2006 Ive got the same tool. Works great. Try a search on Ebay under moon clip loader. Thats where I got mine. Good luck Link to comment Share on other sites More sharing options...
8shooter Posted February 17, 2006 Share Posted February 17, 2006 I use the brownells demooner, but drilled through the end of the handle so I can demoon nearly a whole clip and then spit the loads back into the ammo case through the other end, works well. I have attached a photo of my what I load my clips with, cheapest and quickest I could find and I never lose it ..... Link to comment Share on other sites More sharing options...
scooterj Posted February 17, 2006 Share Posted February 17, 2006 I have attached a photo of my what I load my clips with, cheapest and quickest I could find and I never lose it ..... Looks just like the one I use Link to comment Share on other sites More sharing options...
Carmoney Posted February 17, 2006 Share Posted February 17, 2006 I use the brownells demooner, but drilled through the end of the handle so I can demoon nearly a whole clip and then spit the loads back into the ammo case through the other end, works well.I have attached a photo of my what I load my clips with, cheapest and quickest I could find and I never lose it ..... Can you give us the Brownells part number for that? Link to comment Share on other sites More sharing options...
scooterj Posted February 17, 2006 Share Posted February 17, 2006 352-197-100 Extended 10mm Clip Stripper 352-197-000 .45 ACP Clip Stripper Link to comment Share on other sites More sharing options...
8shooter Posted February 18, 2006 Share Posted February 18, 2006 I use the brownells demooner, but drilled through the end of the handle so I can demoon nearly a whole clip and then spit the loads back into the ammo case through the other end, works well. I have attached a photo of my what I load my clips with, cheapest and quickest I could find and I never lose it ..... Can you give us the Brownells part number for that? I'll go one better and attach a link. Brownells Moon Stripper Link to comment Share on other sites More sharing options...
Bwana Six-Gun Posted February 18, 2006 Share Posted February 18, 2006 I have been using just the standard moon clips from T & K and Dillon for the last few years, but does anyone have any experience with the new RIMZ moon clips. Are they reliable? What about the hearthco? Are they really worth the extra $. I use Winchester Nickel plated .45 ACP almost exclusively and wonder if it might be worth spending some extra coin to get ready for the 2006 MS Classic? Link to comment Share on other sites More sharing options...
haras Posted February 19, 2006 Share Posted February 19, 2006 I have been using just the standard moon clips from T & K and Dillon for the last few years, but does anyone have any experience with the new RIMZ moon clips. Are they reliable? What about the hearthco? Are they really worth the extra $. I use Winchester Nickel plated .45 ACP almost exclusively and wonder if it might be worth spending some extra coin to get ready for the 2006 MS Classic? AHhhh......gearing up are we? Come on, I got cha' Link to comment Share on other sites More sharing options...
Bwana Six-Gun Posted February 19, 2006 Share Posted February 19, 2006 Gimme a break Glenn. You know you are practicing and trying to get ready just as much as I am, if not more. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now