Ultimate Casefeeder How To!

[Meangun]

Insert the lower case feed tube into the casefeed adapter.

Take the micro switch housing ( the last see through plastic piece) and with the larger end up insert the upper case feed tube into it all the way. Rotate the bowl as needed in order to lign up the upper case feed tube, micro switch housing and lower case feed tube. Bring the micro switch tube down over the lower case feed tube till it seats. Make sure all tubes are as alligned as possible. Tighten the bowl screw. Don't go silly.

Next take the station 1 locator from your case feeder caliber conversion and install it as so.

We can now put the machine back together. index ball, spring, shell plate, etc.

Edited January 9, 2007 by Meangun