steel1212 Posted September 24, 2007 Share Posted September 24, 2007 Shot this today in L10 in the morning and Limited in the afternoon. L10 was 3.86 down 3 Limited was 3.66 down 2 I really wanted that 3.5 clean...next time. Quote Link to post Share on other sites
professor Posted October 24, 2007 Share Posted October 24, 2007 Shooting revo, I shot this all As in 8.04 sec, for 78.9%. Missed one steel after the reload and had to go back to get it. Even so, as a solid B shooter, this is the first Class A score I've gotten. Without the miss, I'd have gotten a 86.3% score. Quote Link to post Share on other sites
professor Posted December 13, 2007 Share Posted December 13, 2007 Shooting revo, I shot this all As in 8.04 sec, for 78.9%. Missed one steel after the reload and had to go back to get it. Even so, as a solid B shooter, this is the first Class A score I've gotten. Without the miss, I'd have gotten a 86.3% score. OK, the other shoe finally dropped. In my earlier post, I used my 4.9751HF and listed the classifier % based on the Ohio Calculator [78.8559%]. Now that the classifier data has been loaded into the USPSA site, they actually credited me with 73.1632%. Checking the numbers, it appears that the Ohio Calculator results are consistent with using the top revo HF from that 2005 Area 6 match where "Fluffy's Revenge 1" first appeared. Back in February, Nemo gave his results on this classifier, and used the Ohio Calculator to post a tentative 75.1866%. I just checked his USPSA ranking, and he was credited with that percentage. That means the USPSA and the Ohio Calculator HHFs were the same back in February, but the USPSA HHF is now about 7.8% higher, and a nice round number [x.x000], indicating that somebody arbitrarily moved it up. Anybody else notice this? Quote Link to post Share on other sites
Shawn Knight Posted April 6, 2008 Share Posted April 6, 2008 Tore this one a new ass for my skill level! Production 4.17sec 40 points 9.6618HF!!!! 76%!!!! Quote Link to post Share on other sites
Tactical Timmy Posted July 13, 2008 Share Posted July 13, 2008 I shot this at area 5 last month. I think this might be my fav clasifier. 2008 Area_5_Championship - Stage 8 Fluffy's Revenge 1 Place Name No. Class Division Points Penalties Time Hit Factor Stage Pts Stage % 1 Max M. 238 GM Open 36 0 2.57 14.0078 40.0000 100.00% 2 Adam K. 269 M Open 38 0 2.83 13.4276 38.3432 95.86% Quote Link to post Share on other sites
JThompson Posted September 8, 2008 Share Posted September 8, 2008 (edited) Shot this one yesterday... 3.46 down 1. If Ohio is right that barely makes A. SLOW Edited September 8, 2008 by JThompson Quote Link to post Share on other sites
JThompson Posted September 8, 2008 Share Posted September 8, 2008 (edited) I wasn't real happy with my time on this one, so I went down and set it up for a couple of runs. Out of about 4 runs the best I saw was 2.69 down 3. I'm going to set it up once more later in the week and run it cold. The way I see it to get 100% on this you would have to get a 2.7 clean with a My draw was .91 first shot. Edited September 9, 2008 by JThompson Quote Link to post Share on other sites
Pdoyle Posted November 3, 2008 Share Posted November 3, 2008 Not to good with this calculator stuff. Production - M & P 9mm- Atlanta Arms 147 2.60 with 40 points Limited- M & P Pro - Atlanta Arms 147 (Minor) 2.64 with 40 points I have been dry practicing a bunch for an upcoming class with Bennie Cooley and really working on transitions from paper to steel and vice versa. Anyone know the hit factors and what this will factor out to. Could not get the classifier calculator to work. Quote Link to post Share on other sites
steel1212 Posted November 3, 2008 Share Posted November 3, 2008 Not to good with this calculator stuff.Production - M & P 9mm- Atlanta Arms 147 2.60 with 40 points Limited- M & P Pro - Atlanta Arms 147 (Minor) 2.64 with 40 points I have been dry practicing a bunch for an upcoming class with Bennie Cooley and really working on transitions from paper to steel and vice versa. Anyone know the hit factors and what this will factor out to. Could not get the classifier calculator to work. ummm nothing special just 100% on both!!! Quote Link to post Share on other sites
Pdoyle Posted November 4, 2008 Share Posted November 4, 2008 Not to good with this calculator stuff.Production - M & P 9mm- Atlanta Arms 147 2.60 with 40 points Limited- M & P Pro - Atlanta Arms 147 (Minor) 2.64 with 40 points I have been dry practicing a bunch for an upcoming class with Bennie Cooley and really working on transitions from paper to steel and vice versa. Anyone know the hit factors and what this will factor out to. Could not get the classifier calculator to work. ummm nothing special just 100% on both!!! why thank you sir...... Quote Link to post Share on other sites
mike cyrwus Posted November 4, 2008 Share Posted November 4, 2008 Not to good with this calculator stuff.Production - M & P 9mm- Atlanta Arms 147 2.60 with 40 points Limited- M & P Pro - Atlanta Arms 147 (Minor) 2.64 with 40 points I have been dry practicing a bunch for an upcoming class with Bennie Cooley and really working on transitions from paper to steel and vice versa. Anyone know the hit factors and what this will factor out to. Could not get the classifier calculator to work. wow! 100% shooting limited minor!! Quote Link to post Share on other sites
ima45dv8 Posted January 11, 2009 Share Posted January 11, 2009 Shot it yesterday with all A's @ 4.21 with my G17. A little slow but the 9.5012 HF comes out to 74% per the classifier calculator. I'm gonna screw around and make A class in Production one of these days! Quote Link to post Share on other sites
SoonerPast Posted January 12, 2009 Share Posted January 12, 2009 This little excursion into Production has developed into something for you. Congratulations. Quote Link to post Share on other sites
boz1911 Posted January 12, 2009 Share Posted January 12, 2009 Shot it yesterday with all A's @ 4.21 with my G17. A little slow but the 9.5012 HF comes out to 74% per the classifier calculator. I'm gonna screw around and make A class in Production one of these days! Yup!! Quote Link to post Share on other sites
JThompson Posted April 14, 2009 Share Posted April 14, 2009 (edited) Got around to setting this one up again... First run, cold not even a sight picture: 3.00 down 0 2.89 down 0 2.89 down 0 2.69 down 0 Decided to see how fast I could go 2.69 down 1 2.70 down 1 Decided to really push hard. Draw .85 2.6 down 1 2.54 down 2 2.50 down 0 2.54 down 1 2.48 down 1 2.44-2.34-2.33 with a NS... quit went back and shot a few more runs solid... don't like to finish with a NS LOL The last one I was done shooting before I saw th first steel start to fall. I'm going to shoot this one up at Milan in a couple weeks... Looking forward to seeing my first 100% Fastest draw to an A was .88 Edited April 14, 2009 by JThompson Quote Link to post Share on other sites
apriav Posted June 9, 2009 Share Posted June 9, 2009 Sunday, shot it 2.88 and one charlie, minor limited......couldn't get the calculator page to open. Got a link or address to the calculator? Quote Link to post Share on other sites
steel1212 Posted June 9, 2009 Share Posted June 9, 2009 Sunday, shot it 2.88 and one charlie, minor limited......couldn't get the calculator page to open. Got a link or address to the calculator? 99.3% http://www.classifiercalc.com/ Quote Link to post Share on other sites
MoNsTeR Posted November 30, 2009 Share Posted November 30, 2009 4.01 seconds all A's, Open Unclassified (but on track to class B, like all my other divisions) 67.3% Not a score to write home about, but this was the first stage of the match and I was quite pleased that I was able to shoot it at a solid level totally cold. Quote Link to post Share on other sites
NickJ Posted December 1, 2009 Share Posted December 1, 2009 I did it 4.00, 1 down. Limited A. My draw still feels really slow, competing again this year after a 7 year layoff. A lot to work on.... B class score. Quote Link to post Share on other sites
JorDanO Posted January 10, 2010 Share Posted January 10, 2010 Shot this today at Pecos Valley action Shooters in Roswell, NM. 36 points 3.59 sec 78.9588% according to the classifier calculator I swung a little too far on the last paper, and ended up with 2 C's. I would've been in the 87% range if I was an inch to the left . Oh well Master can wait for a while. Quote Link to post Share on other sites
mhop Posted January 30, 2010 Share Posted January 30, 2010 can somebody clarify where the no-shoots go on this stage, on the c-d line or c-a line thanks Quote Link to post Share on other sites
Bubber Posted February 1, 2010 Share Posted February 1, 2010 Shooting revo, I shot this all As in 8.04 sec, for 78.9%. Missed one steel after the reload and had to go back to get it. Even so, as a solid B shooter, this is the first Class A score I've gotten. Without the miss, I'd have gotten a 86.3% score. OK, the other shoe finally dropped. In my earlier post, I used my 4.9751HF and listed the classifier % based on the Ohio Calculator [78.8559%]. Now that the classifier data has been loaded into the USPSA site, they actually credited me with 73.1632%. Checking the numbers, it appears that the Ohio Calculator results are consistent with using the top revo HF from that 2005 Area 6 match where "Fluffy's Revenge 1" first appeared. Back in February, Nemo gave his results on this classifier, and used the Ohio Calculator to post a tentative 75.1866%. I just checked his USPSA ranking, and he was credited with that percentage. That means the USPSA and the Ohio Calculator HHFs were the same back in February, but the USPSA HHF is now about 7.8% higher, and a nice round number [x.x000], indicating that somebody arbitrarily moved it up. Anybody else notice this? Yep Professor I had a 89% + -, according to the Calculator but Sedro got me at 78% + - It kept me out of glory. Later rdd Quote Link to post Share on other sites
furyalecto Posted September 3, 2010 Share Posted September 3, 2010 (edited) Is this still a valid classifier? I am assuming yes. I thought I read somewhere that it was going to be removed but I can't find where I read it. It is still on the website & in EZWin so that should be a yes. 39 in 4.83 Limited. Right around my current level. Edited September 4, 2010 by furyalecto Quote Link to post Share on other sites
DonovanM Posted May 9, 2011 Share Posted May 9, 2011 Shot this today at Pecos Valley action Shooters in Roswell, NM. 36 points 3.59 sec 78.9588% according to the classifier calculator I swung a little too far on the last paper, and ended up with 2 C's. I would've been in the 87% range if I was an inch to the left . Oh well Master can wait for a while. I shot it in 3.62, 36 points as well. I thought it was a 74 but turns out it was a 78 I completely flubbed my draw. Didn't get a good grip in my holster so it felt like an eternity before I could readjust and pull the thing out. Cost me an M class score at least Quote Link to post Share on other sites
JorDanO Posted July 24, 2011 Share Posted July 24, 2011 Shot this today at Pecos Valley action Shooters in Roswell, NM. 36 points 3.59 sec 78.9588% according to the classifier calculator I swung a little too far on the last paper, and ended up with 2 C's. I would've been in the 87% range if I was an inch to the left . Oh well Master can wait for a while. I shot it in 3.62, 36 points as well. I thought it was a 74 but turns out it was a 78 I completely flubbed my draw. Didn't get a good grip in my holster so it felt like an eternity before I could readjust and pull the thing out. Cost me an M class score at least Shot this again today at West Texas Practical Shooters. Luckily I've improved in the last year and a half. 38 pts in 3.02 for a 12.5828 HF The calculators show it for just over 99% in Production. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.