Sarge Posted August 27, 2022 Share Posted August 27, 2022 One of my newish pocket Pro’s is sounding a second beep at around 2.5 minutes. Tried several new batteries, par is set to 0, etc. thoughts? Quote Link to comment Share on other sites More sharing options...
Farmer Posted August 27, 2022 Share Posted August 27, 2022 17 hours ago, Sarge said: One of my newish pocket Pro’s is sounding a second beep at around 2.5 minutes. Tried several new batteries, par is set to 0, etc. thoughts? Did you mean 2.5 seconds and not min? If it’s min maybe it’s trying to tell you something. Quote Link to comment Share on other sites More sharing options...
Sarge Posted August 27, 2022 Author Share Posted August 27, 2022 No, it’s 2 minutes 45 seconds. Quote Link to comment Share on other sites More sharing options...
Farmer Posted August 28, 2022 Share Posted August 28, 2022 (edited) On 8/27/2022 at 4:14 PM, Sarge said: No, it’s 2 minutes 45 seconds. I tried mine, no second beep. Something you may try is, take the battery out, push and hold the power button for about 5 seconds, then just let it sit for about 10 min. Put the battery back in and see what happens. Its almost like it’s not recognizing the zero par time. I’ve done this on other electronics and sometimes it works sometimes not. If not, you know what to do Monday AM. One other thing I though you might try is to set the par time to two seconds or so to see if it works. Then set it to .2 seconds and see what that does. When I set mine to anything less than a second it doesn’t beep. Just something else to try. Edited August 29, 2022 by Farmer Added Quote Link to comment Share on other sites More sharing options...
Sarge Posted August 30, 2022 Author Share Posted August 30, 2022 The fine folks at Competition Electronics came through! Apparently there is a small ghost in the machine. Turn on the pocket pro timers and hold down the PAR button until 0 shows. If there is a decimal point in front of the 0 (.0) then you need to hard reboot the device. To reboot, Power down by removing battery, reinstall battery, hold down the review button and tap the power button. Then press and hold PAR again and decimal point will be gone. Quote Link to comment Share on other sites More sharing options...
Blueknight749 Posted January 23 Share Posted January 23 I recently purchased a newer pocket pro with the BT feature and it doesn’t have the issue you’re speaking of. I would suggest calling the manufacturer. Quote Link to comment Share on other sites More sharing options...
.gif.53c483221c1b60d84bce93d42c5def5a.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.