pcar157 Posted April 1, 2023 Share Posted April 1, 2023 Apologize for resurrecting an older thread. However, I am searching to buy an OEM firing pin for CZ Shadow 2. Appears that my normal go to, Cajun and CZC, only have the extended firing pin. Any help will be appreciated. Link to comment Share on other sites More sharing options...
GeneBray Posted April 1, 2023 Share Posted April 1, 2023 CZ USA Link to comment Share on other sites More sharing options...
pcar157 Posted April 1, 2023 Share Posted April 1, 2023 9 hours ago, GeneBray said: CZ USA Thank you Sir! Link to comment Share on other sites More sharing options...
pcar157 Posted April 5, 2023 Share Posted April 5, 2023 Ordered new firing pin from CZ USA on Sunday 4.2 delivered on Wednesday, 4.5. Shipping via FedEx Ground just $8. What's not to like??? Thank you @GeneBray for the heads up. Link to comment Share on other sites More sharing options...
PA_USPSA Posted June 6, 2023 Share Posted June 6, 2023 Just received the stock firing pin from CZ Custom and installed it in my Accushadow 2. Doing the pencil test I can hit an 8 foot high ceiling with the pistol at waist height. I'll be going to the range this Saturday to test out my gun (13# hammer spring, stock firing pin, and Rami firing pin spring) with Winchester and CCI primers. I'll report back my results. Link to comment Share on other sites More sharing options...
PA_USPSA Posted June 10, 2023 Share Posted June 10, 2023 Using my Accushadow 2 with 13 pound hammer spring, stock firing pin, and Rami firing pin spring I shot 100 rounds using Winchester primers and 100 rounds using CCI primers. There were no failures or malfunctions of any kind. The indentation in the primers was not as deep as when I used the extended firing pin, but still pretty deep. Attached is a picture with the Winchester primer on the left and the CCI primer on the right. I did not notice any significant difference between the two. Link to comment Share on other sites More sharing options...
Captiva Posted June 17, 2023 Share Posted June 17, 2023 On 8/2/2022 at 7:34 PM, Friedrich_der_Grosse said: ... grown a little bit worried about drop safety when someone mentioned that someone died because someone dropped their CZ Shadow 2, ... Out of respect and for the record here, that someone was John Kozoil of the town of Greece, New York. In Loving Memory of John David Koziol 1953 - 2020 NY Range Safety Officer Killed by Negligent Discharge During USPSA Competition Link to comment Share on other sites More sharing options...
GeneBray Posted June 17, 2023 Share Posted June 17, 2023 On 4/5/2023 at 7:20 AM, pcar157 said: Ordered new firing pin from CZ USA on Sunday 4.2 delivered on Wednesday, 4.5. Shipping via FedEx Ground just $8. What's not to like??? Thank you @GeneBray for the heads up. You are very welcome. Link to comment Share on other sites More sharing options...
Almo Posted June 20, 2023 Share Posted June 20, 2023 I did a test with 4 Shadow 2's. Each had an extended firing pin and an 8.5 lb hammer spring. I left the 8.5 lb hammer spring in, put the original firing pin and firing pin spring back in, and tested them with Blazer 124 gr, Eley Competition 124 gr, Federal Syntech 150 gr, and my handloaded 125 gr (with Federal primers). One gun wouldn't set off one of the Blazers, otherwise everything fired every time. I tried the one cartridge that wouldn't fire in all of the guns, and it wouldn't fire in any of them even after several strikes, so it may have been a defective primer. So, I'll probably err on the side of safety and leave the original firing pins in. If I have problems down the road, I could change my mind, since this would be such a rare occurrence. This is with an 8.5 lb hammer spring so, if you're running a 10 or 11 lb hammer spring, I can't imagine you'll have a problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now