midvalleyshooter Posted January 30, 2022 Share Posted January 30, 2022 I have a MBX built PCC that came with a Hiperifre Hipertouch Competition trigger. It has been 100% reliable in the year I have owned it. It came with the green springs installed and the trigger has been great. Recently it will randomly let off a 2 or 3 round burst. So I tried the red springs today and got a couple more bursts. Any suggestions on a solution? I will contact Hiperfire tomorrow. Thanks in advance, Keith Link to comment
George16 Posted January 30, 2022 Share Posted January 30, 2022 Check out the disconnector spring if it was broken. It happened on my eclipse before and Hiperfire sent me two updated springs as replacement for free and all is well afterwards. Link to comment
midvalleyshooter Posted January 31, 2022 Author Share Posted January 31, 2022 7 hours ago, George16 said: Check out the disconnector spring if it was broken. It happened on my eclipse before and Hiperfire sent me two updated springs as replacement for free and all is well afterwards. Thanks for the info! Link to comment
travail Posted January 31, 2022 Share Posted January 31, 2022 Could also be a sear issue, had that with mine but hiperfire took care of it with new parts so they should get you taken care of. Just check both areas so they can send you what you need. Link to comment
Bdh821 Posted January 31, 2022 Share Posted January 31, 2022 A friend of mine put the ECL in his blowback PCC. I was bump firing it a bunch after since those blowbacks are so bouncy. He ended up taking the ECL out and selling it to me... I'd suggest putting in the red springs and see if that helps. Try holding the gun tighter too? Link to comment
Ner Posted January 31, 2022 Share Posted January 31, 2022 some day it will traaa like that https://www.youtube.com/watch?v=wiVYwbnERwM and fix itself Link to comment
midvalleyshooter Posted February 2, 2022 Author Share Posted February 2, 2022 I called Hiperfire first thing Monday morning and they were very helpful offering solutions. Parts are coming my way to fix this issue. Hiperfire does customer service the right way! They are good to go. Link to comment
George16 Posted February 2, 2022 Share Posted February 2, 2022 6 hours ago, midvalleyshooter said: I called Hiperfire first thing Monday morning and they were very helpful offering solutions. Parts are coming my way to fix this issue. Hiperfire does customer service the right way! They are good to go. Good to hear it’s being taken care of. Hiperfire’s customer service is great. Link to comment
rbx Posted February 9, 2022 Share Posted February 9, 2022 Cool! How can I make mine do that....LOL Link to comment
MedicineMan Posted February 16, 2022 Share Posted February 16, 2022 p Quote I"m probably late to the party on this but my PCC was doing the same thing with the 2Lb springs , so I changed them out to the next heavier set of springs ( 3 or 4 Lb) problem solved. The blowback bolt did not like the light trigger. Link to comment
kitzmiller3gun Posted April 7, 2022 Share Posted April 7, 2022 On 1/30/2022 at 2:10 PM, midvalleyshooter said: I have a MBX built PCC that came with a Hiperifre Hipertouch Competition trigger. It has been 100% reliable in the year I have owned it. It came with the green springs installed and the trigger has been great. Recently it will randomly let off a 2 or 3 round burst. So I tried the red springs today and got a couple more bursts. Any suggestions on a solution? I will contact Hiperfire tomorrow. Thanks in advance, Keith Did the replacement parts solve the problem? Is your trigger weight heavier now? I had a similar problem and found that the gun was just bouncing way too much. After shooting through the chronology, I found the issue... My ammo was making 153 PF, and thats a bit too much energy for my style of shooting. Link to comment
midvalleyshooter Posted April 12, 2022 Author Share Posted April 12, 2022 On 4/7/2022 at 5:00 AM, kitzmiller3gun said: Did the replacement parts solve the problem? Is your trigger weight heavier now? I had a similar problem and found that the gun was just bouncing way too much. After shooting through the chronology, I found the issue... My ammo was making 153 PF, and thats a bit too much energy for my style of shooting. The problem turned out to be me. I had others try it and it was fine. It was also fine from my right shoulder. On the left side I would get the bursts. I have a tremor on my left side and that appears to be the culprit. The light weight PCC and light trigger just caused me to bump fire it on my off side. I solved the issue with a heavier PCC. Link to comment
davebenson Posted June 24, 2022 Share Posted June 24, 2022 Had same issues a couple of times with the same trigger. always always was a broken disconnector spring. Last was in the middle of a stage at the PCC nationals. try taking this apart in a hurry to make the next stage. My fat fingers and that little spring. Luckily my wife was there to help. Link to comment
Nemesis Lead Posted July 14, 2022 Share Posted July 14, 2022 (edited) For me, this was me bump firing the gun. My trigger was too light and I was not getting my finger off the trigger. I put a heavier trigger in and slapped the trigger a bit more. Edited July 15, 2022 by Nemesis Lead Link to comment
outerlimits Posted July 15, 2022 Share Posted July 15, 2022 try shooting a handgun instead...sorry. Link to comment
Nemesis Lead Posted July 15, 2022 Share Posted July 15, 2022 12 minutes ago, outerlimits said: try shooting a handgun instead...sorry. Well, I am M Class in both PCC and Production. While there are certainly better shooters than me, most people are not. But I will continue to shoot PCC. Thank you so much for your input. You do your journey, I will do mine. Link to comment
AKJD Posted July 15, 2022 Share Posted July 15, 2022 16 hours ago, Nemesis Lead said: But I will continue to shoot PCC. Thank you so much for your input. You do your journey, I will do mine. Great answer. Some people just can’t stop themselves. Link to comment
Polaris13 Posted July 21, 2022 Share Posted July 21, 2022 +1 on Hiperfire customer service Link to comment
dfox Posted August 23, 2022 Share Posted August 23, 2022 On 1/30/2022 at 12:10 PM, midvalleyshooter said: I have a MBX built PCC that came with a Hiperifre Hipertouch Competition trigger. It has been 100% reliable in the year I have owned it. It came with the green springs installed and the trigger has been great. Recently it will randomly let off a 2 or 3 round burst. So I tried the red springs today and got a couple more bursts. Any suggestions on a solution? I will contact Hiperfire tomorrow. Thanks in advance, Keith Try 2 new trigger pins I had the same thing happen and with the new trigger pins mine did that so I tried regular trigger pins and it worked fine. Link to comment
Chapo Posted October 25, 2022 Share Posted October 25, 2022 Could be the trigger is defective. Had to return one for exactly that Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now