DAA MBF 45ACP Plate

[ezra650]

Does anyone out there have a 45 acp collator plate for their DAA MBF and would give me some measurements? I need plate thickness, depth and width of bullet cut out slots, distance between bullet cut outs (near edge to near edge), and number of bullet slots around the circumference of the plate. 

 

I own 2 MBFs and have a few conversion kits along with the parts to make a 45acp conversion kit minus the collator plate. I think I'm going to have some fun 3d printing one for myself as a drafting project.

Edited January 18, 2022 by ezra650

[AHI]

if you can put a diagram up. show and label the measurements you need .(123 or abc) I will see what I can do.

[ezra650]

2 hours ago, AHI said:

if you can put a diagram up. show and label the measurements you need .(123 or abc) I will see what I can do.

I did some reverse engineering this morning based off the 9mm plate. Really all I need is the thickness of the plate and how many bullet cutouts are on the plate. The width of the section between each bullet slot would be handy. 

 

I can try and work on getting some pictures and diagram but the 1st couple of measurements should be self explanatory...

[AHI]

thickness   .475-.479

# cut outs    18

with between    two of them  1.30 and 1.310 yes they are different

                          rest  of them  .405-.407

                        open part for bullet    .482-.483

Edited January 18, 2022 by AHI

[AHI]

just for reference my 9mm plate is .472-.473 thick

Edited January 18, 2022 by AHI

[ezra650]

3 hours ago, AHI said:

thickness   .475-.479

# cut outs    18

with between    two of them  1.30 and 1.310 yes they are different

                          rest  of them  .405-.407

                        open part for bullet    .482-.483

This is great. Thank you so much! 

 

And yea I was wondering if all the pistol plates are same thickness. I dont think it's super critical.