ahfox32 Posted June 30, 2021 Share Posted June 30, 2021 Just ordered an Icarus pro competition grip and now I need some suggestions for all the other pieces I'll need to complete the pistol. I have never owned a Sig so I'm a complete idgit on these pistols. I know I'll need a FCU, slide, barrel, guide rod/springs, mags & mag release, take down lever (would probably like one with a built in thumb rest), etc. This will be a dedicated CO gun so no sights needed. Please share your suggestions/experience to help me get started down this path. Thanks in advance. Link to comment Share on other sites More sharing options...
DesertTortoise Posted June 30, 2021 Share Posted June 30, 2021 (edited) Unless they changed the rules you'll have to use it in limited or open since the grip is extended to form a magwell. Not sure as they seem to change the rules all the time lately. Aside from the frame / grip module I would get an x5 slide which already has optic cuts, upgraded barrel, and steel guiderod that takes 1911 springs. Add a Grey guns trigger and you are good. Edited June 30, 2021 by DesertTortoise Link to comment Share on other sites More sharing options...
ahfox32 Posted July 6, 2021 Author Share Posted July 6, 2021 Thanks DesertTortoise. I went ahead & just bought a Legion. Now waiting on a mag release, SRO mounting plate & some other goodies to arrive. Link to comment Share on other sites More sharing options...
DesertTortoise Posted July 6, 2021 Share Posted July 6, 2021 I think the Legion is the best value per dollar out there right now. Link to comment Share on other sites More sharing options...
yekcoh Posted July 14, 2021 Share Posted July 14, 2021 On 7/6/2021 at 1:44 PM, ahfox32 said: Thanks DesertTortoise. I went ahead & just bought a Legion. Now waiting on a mag release, SRO mounting plate & some other goodies to arrive. you don't need an SRO mounting plate. The new Legions have SRO foot prints. I just bought mine two weeks ago. same deal Link to comment Share on other sites More sharing options...
Boomstick303 Posted July 14, 2021 Share Posted July 14, 2021 14 minutes ago, yekcoh said: The new Legions have SRO foot prints Does the SRO fit flush against the cutouts in the slide? Does the slide have lugs that fit up into the SRO? If not, you may want to consider an plate. With no lugs and/or the optic does not fit snug into the slide cutouts only the screws are feeling the sheer force of the optic as the slide cycles. Those screws will most likely not last long. Link to comment Share on other sites More sharing options...
ahfox32 Posted July 14, 2021 Author Share Posted July 14, 2021 IMHO a plate is the best way to mount an SRO. If mounted to the stock slide cut the front of the SRO overhangs the ejection port and that might cause issues with junk on the glass and maybe brass hitting the glass. Also, if mounted this way the screws are all that is holding the SRO on the slide. A Springer Precision plate has lugs and the SRO is at the rear of the slide away from the ejection port. Link to comment Share on other sites More sharing options...
yekcoh Posted July 16, 2021 Share Posted July 16, 2021 (edited) On 7/14/2021 at 3:34 PM, ahfox32 said: IMHO a plate is the best way to mount an SRO. If mounted to the stock slide cut the front of the SRO overhangs the ejection port and that might cause issues with junk on the glass and maybe brass hitting the glass. Also, if mounted this way the screws are all that is holding the SRO on the slide. A Springer Precision plate has lugs and the SRO is at the rear of the slide away from the ejection port. I really liked SRO so I wanted to use it on my Sig legion couple years back. I could not stand the adapter plate. The whole shooting experience changes when you add half an inch to the height of sro. Something about it is off. I sold all that s#!t and fast forward to this year. Heard Sig listened and actually improved hence RMR foot print on newer runs. Shooting feels great. IMO, plate is a massive compromise. I've been getting Brass to optic on other guns and ran fine for over a year of shooting. I got over the idea of brass hitting optic. Besides, I've yet to have any issues or brass markings on my legion. I was initially concerned with The extra overhang. It is minimal, it doesn't cause any problems Edited July 16, 2021 by yekcoh Link to comment Share on other sites More sharing options...
yekcoh Posted July 16, 2021 Share Posted July 16, 2021 On 7/14/2021 at 3:02 PM, Boomstick303 said: Does the SRO fit flush against the cutouts in the slide? Does the slide have lugs that fit up into the SRO? If not, you may want to consider an plate. With no lugs and/or the optic does not fit snug into the slide cutouts only the screws are feeling the sheer force of the optic as the slide cycles. Those screws will most likely not last long. Link to comment Share on other sites More sharing options...
Blue Jacket Posted July 19, 2021 Share Posted July 19, 2021 I haven’t done much to mine. Springer mag release and curved AC trigger. I just don’t prefer straight triggers. Just run it. I’ve been happy with mine. Link to comment Share on other sites More sharing options...
ahfox32 Posted July 19, 2021 Author Share Posted July 19, 2021 Thanks for the replies. I also got an extended Springer mag release & SRO optic plate, an Icarus grip module, and a thumb rest. Bought a FCU for the stock grip so I can have the option of two different grips. Now if I can just find an OEM Legion complete slide I'll have two complete guns. Link to comment Share on other sites More sharing options...
Benelli-Benn Posted July 27, 2021 Share Posted July 27, 2021 New P320 Xfive Legion. shoots great. Questioning should I upgrade barrel? Upgrades that have been performed: GGs adjustable Competition flat Trigger system, Springer Extended ma release, *thumb rest [generic]* *thumb rest [generic]* takedown lever, SP 21 rd 140mm baseplates. thanks, Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now