Jump to content
Brian Enos's Forums... Maku mozo!

Iron Sights - 10/22 with Picatinnay Rail - Wiland ULW Barrel


Hoops
 Share

Recommended Posts

I have Magnum Research recievers.  Wiliand ULW barrel.   I want to set up one of my guns with Iron (fiber optic) front sight and rear ghost ring.  I purchased Wiland iron sight optics but the standard 10/22 front and rear height they come in will not get the height off TOP of BARREL that I want.  I prefer 1-5/8" to 1-3/4" so I don't have scrunch my head down during SCSC matches.  I also purchased Wiland PCC front FO blade and two PCC rear blades.  TOO tall.  I cut down the front PCC blade and drilled a ghost hole in one of the taller PCC ghost ring blades.  It looks decent but I lost the extra outside circle material around the hole and it's a bit too close to the now straight edges.  Repainted it and baked in oven.  Works but not the best presentation.

 

I have spoken with Todd/Wiland and he is looking at developing a "middle" height rear ghost ring and front FO blade for more 10/22 picatinnay rail options.  But I know he is already struggling to keep up on current orders so I'm not sure how long it may take.

 

I am wondering if anyone on Enos has found a set-up that works and give height adjustments.  I search the web and so far ...no go.   The Wiland ULW barrel which is a smaller diameter so his fron barrel clamp works fine.  I can get by with the front blade now that I have cut it  down.    What I'm looking for is a rear adjustable ghost ring that fits on a picatinny receiver rail and adjust up to get 1-5/8" (3/4").  Also.....Wiland does not have rear windage adjustment so you have to rotate the front blade.  I have done this.  Doesn't take much twist to move to zero.

 

Thanks....

Link to comment
Share on other sites

This probably won't help you but what I did was to 3d print my own adapters to run the Wiland 10/22 front sight insert and PCC rear sight insert on my PCC.  Through trial and error I configured them to the same height as my C-More Railway.

Link to comment
Share on other sites

3 minutes ago, apoc4lypse said:

This probably won't help you but what I did was to 3d print my own adapters to run the Wiland 10/22 front sight insert and PCC rear sight insert on my PCC.  Through trial and error I configured them to the same height as my C-More Railway.

Actually this did help.  Reminded me I have a friend who is clever with 3D printer he has.

 

thanks...

Link to comment
Share on other sites

If you'd like, PM me your email and I'll send over the files I made for your friend to look over.  He will probably need to modify/combine them to work with your setup.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...