Jump to content
Brian Enos's Forums... Maku mozo!

124gr. or 147gr. for minor PF Walther Q5SF


bobbyblaze
 Share

Recommended Posts

124 plated tumbled out of my SF. Coated bullets worked fine but I don't like the smoke. I use jacketed 124 now. They are very accurate. I have tried 147's and they shoot fine, but I prefer the 124's.

Link to comment
Share on other sites

I shoot 124/125gr blue bullets, gallant bullets and black bullets through my SF with no issues. Great accuracy out of all 3, a little smoke with vvn320 but not much.

Link to comment
Share on other sites

I started off with Berry's 124 HP with Titegroup powder then switched to 147 powder coated over sport pistol.  The 147s are super accurate and fairly soft shooting.  I'm running a 13lbs Wilson flat wire spring with bullets at 132 pf 

Link to comment
Share on other sites

On 4/22/2021 at 9:28 PM, stock said:

I started off with Berry's 124 HP with Titegroup powder then switched to 147 powder coated over sport pistol.  The 147s are super accurate and fairly soft shooting.  I'm running a 13lbs Wilson flat wire spring with bullets at 132 pf 

good to know thanks!

Link to comment
Share on other sites

I tested 115, 124, and 147  FMJ (precision delta) with HS-6 and titegroup and felt the 147 with TG had the softest recoil impulse.  It was pretty clear by feel alone that the heavier bullets and faster powders shot softer when loaded to min PF

Edited by Chrome308
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...