Jump to content
Brian Enos's Forums... Maku mozo!

Holster for Shadow 2 with Eemann-Tech slide release/thumb rest


jejb
 Share

Recommended Posts

Loving my Eemann-Tech slide release/thumb rest, but it won't fit in my blade tech holster. Does not look like it could modified to accept it since I would need to cut into the hinge to make room for it. Just wondering if anyone knows of a holster option that may work for this setup.

https://store.dot40.net/competition-arena/eemann-tech-4724/eemann-tech-slide-stop-with-thumb-rest-for-cz-shadow-2-black-2900709

Edited by jejb
Link to comment
Share on other sites

Just buy one of the race holsters like DAA Racer X, Racemaster or Cr speed. Any kydex you’ll use will need to be dremeled or custom made.

 

You can also ask Red Hill Tactical if they can make you one since they make one for a TSO (with either stock thumb rest or nitro fin).

Link to comment
Share on other sites

So, Red Hill says they don't do thumbrest holsters anymore. I lucked out and got one right before they stopped. It works great. When the new Production rules came out, I jumped in and bought a new holster for a weapon mounted light (WML). I was resigned to not being able to use my Eemann-Tech slide release/thumb rest. Surprise! It works just fine. I don't know if all of their holsters would fit the thumbrest, but the CZ SP 01 decocker with WML one does. 

Edited by Russty
clarity
Link to comment
Share on other sites

14 hours ago, Russty said:

So, Red Hill says they don't do thumbrest holsters anymore. I lucked out and got one right before they stopped. It works great. When the new Production rules came out, I jumped in and bought a new holster for a weapon mounted light (WML). I was resigned to not being able to use my Eemann-Tech slide release/thumb rest. Surprise! It works just fine. I don't know if all of their holsters would fit the thumbrest, but the CZ SP 01 decocker with WML one does. 

Thanks much for the info. But to be clear, you used that SP 01 holster for a Shadow 2? And which holster line was that in at Redhill? I couldn't find a WML option.

Link to comment
Share on other sites

Hey guys FYI Eemann Tech has engaged with Ghost to produce a holster to accommodate the S1 and S2 with the Eemann Tech thumb rest slide stop installed, prototype tested and holsters are being produced and will be available soon.

Link to comment
Share on other sites

4 hours ago, PaulH said:

Hey guys FYI Eemann Tech has engaged with Ghost to produce a holster to accommodate the S1 and S2 with the Eemann Tech thumb rest slide stop installed, prototype tested and holsters are being produced and will be available soon.

Thanks much! I'll give them a shout.

Link to comment
Share on other sites

14 hours ago, PaulH said:

Hey guys FYI Eemann Tech has engaged with Ghost to produce a holster to accommodate the S1 and S2 with the Eemann Tech thumb rest slide stop installed, prototype tested and holsters are being produced and will be available soon.

 

Sounds really good👍

Link to comment
Share on other sites

I have basically the same setup on 2 different CZ's and use RHT holsters. All I did was use a good hot hair dryer or heat gun and heat the area up where the thumb rest goes and shove it in and let cool. After doing it a couple of times it will mold a channel and draw & insert perfect with a little adjustment of the retaining screws. No grinding necessary.

 

gerritm

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...