Stage 3 Posted February 6, 2021 Share Posted February 6, 2021 What has been the reliability for the P320X5, I've only got around 2K down the pipe on mine with no issues, but I'm curious what some high round count users are finding. Round count when things start to break or need replacement. Thanks, Bill Link to comment Share on other sites More sharing options...
Lowsc3 Posted February 7, 2021 Share Posted February 7, 2021 I'm roughly 7k rounds into mine and no issues. Did bent the ejector tab once though user error. Don't slam a mag in with aftermarket bad pads and slide locked open! Link to comment Share on other sites More sharing options...
bimmer1980 Posted February 7, 2021 Share Posted February 7, 2021 About 12K, not one issue till now Link to comment Share on other sites More sharing options...
Rich406 Posted February 7, 2021 Share Posted February 7, 2021 Over the last 4 years I have 200k+ rounds on various p320 X5s and X5 Legions. I’m trying to think of any issues I’ve had that weren’t user induced and can’t. Link to comment Share on other sites More sharing options...
j1b Posted February 7, 2021 Share Posted February 7, 2021 I didn't clean mine for about 4k rounds and started to get some small malfunctions (2 failure to feeds in about 200 rounds). Cleaned the gun and they miraculously went away. No issues that I didn't cause. Link to comment Share on other sites More sharing options...
jpm2953 Posted February 8, 2021 Share Posted February 8, 2021 a little over 15k on mine. Still original springs. cleaned around 8-10k rounds. Zero issues Link to comment Share on other sites More sharing options...
jaep1911 Posted February 9, 2021 Share Posted February 9, 2021 I’ve had FTGTB when I used a 12lb recoil spring. Other than that, 0 issue. Awesome. Link to comment Share on other sites More sharing options...
Orlandoech Posted February 10, 2021 Share Posted February 10, 2021 (edited) I have around 2000 in my X5 Legion with no issues either. Edited February 10, 2021 by Orlandoech Link to comment Share on other sites More sharing options...
Orlandoech Posted February 10, 2021 Share Posted February 10, 2021 (edited) Forgot to mention, I am running X5 Legion, with Sig Max Optic, GG Sear/Springs, Keres Trigger, and a 124gr 130PF load under ASP powder with 12lb spring, also tried a 12.5 and 13lb spring with no issues. Edited February 10, 2021 by Orlandoech Link to comment Share on other sites More sharing options...
Rich406 Posted February 10, 2021 Share Posted February 10, 2021 36 minutes ago, Orlandoech said: I have around 2000k in my X5 Legion with no issues either. 2 million rounds through a single X5, impressive! Or more likely 2000 rounds, which is barely broken in? Link to comment Share on other sites More sharing options...
Rich406 Posted February 10, 2021 Share Posted February 10, 2021 15 hours ago, jaep1911 said: I’ve had FTGTB when I used a 12lb recoil spring. Other than that, 0 issue. Awesome. Was that in a p320 X5 or a X5 legion? 12 is borderline too light in a X5, but should be no issues in a X5 legion. Link to comment Share on other sites More sharing options...
R.Elliott Posted February 10, 2021 Share Posted February 10, 2021 I have an X5 with Legion grip on it and an X5 Legion. Roughly 20,000 rounds split between the two of them with zero malfunctions. Very reliable guns so far. Link to comment Share on other sites More sharing options...
Orlandoech Posted February 10, 2021 Share Posted February 10, 2021 1 hour ago, Rich406 said: 2 million rounds through a single X5, impressive! Or more likely 2000 rounds, which is barely broken in? lol sorry, typo. Link to comment Share on other sites More sharing options...
titandriver Posted February 10, 2021 Share Posted February 10, 2021 I've got pert near three boxes of shells through mine - zero issues so far! How many more shells should I put through it in order to consider it good to go in competition? Link to comment Share on other sites More sharing options...
BillChunn Posted February 10, 2021 Share Posted February 10, 2021 14 minutes ago, titandriver said: I've got pert near three boxes of shells through mine - zero issues so far! How many more shells should I put through it in order to consider it good to go in competition? You're good to go..... Go Fast Don't Suck. BC Link to comment Share on other sites More sharing options...
titandriver Posted February 10, 2021 Share Posted February 10, 2021 4 hours ago, BillChunn said: You're good to go..... Go Fast Don't Suck. BC I shall indeed heed your advice kind sir - thank you! Link to comment Share on other sites More sharing options...
erwos Posted February 11, 2021 Share Posted February 11, 2021 A few thousand through mine. No problems that weren't related to my reloads. Had a nice little case head separation that blew out an extractor once upon a time. Link to comment Share on other sites More sharing options...
RonPogi Posted February 15, 2021 Share Posted February 15, 2021 I have issues on reset spring on the striker pin, after a couple of dry fire without caps the reset spring cut into half. Link to comment Share on other sites More sharing options...
Rich406 Posted February 15, 2021 Share Posted February 15, 2021 1 minute ago, RonPogi said: I have issues on reset spring on the striker pin, after a couple of dry fire without caps the reset spring cut into half. Common problem. Doesn’t really effect the function of the gun. But if you dryfire with any regularity, you are gonna toast that spring. I stopped replacing them in my practice gun a long time ago. Link to comment Share on other sites More sharing options...
RonPogi Posted February 16, 2021 Share Posted February 16, 2021 23 hours ago, Rich406 said: Common problem. Doesn’t really effect the function of the gun. But if you dryfire with any regularity, you are gonna toast that spring. I stopped replacing them in my practice gun a long time ago. So you mean, I can still use the gun with/without the reset spring with no issues? Link to comment Share on other sites More sharing options...
Rich406 Posted February 16, 2021 Share Posted February 16, 2021 1 minute ago, RonPogi said: So you mean, I can still use the gun with/without the reset spring with no issues? Yes Link to comment Share on other sites More sharing options...
echotango Posted February 19, 2021 Share Posted February 19, 2021 On 2/15/2021 at 5:34 PM, Rich406 said: Yes Are you talking about this spring? If it breaks, everything still works? Link to comment Share on other sites More sharing options...
Rich406 Posted February 19, 2021 Share Posted February 19, 2021 (edited) 5 minutes ago, echotango said: Are you talking about this spring? If it breaks, everything still works? No. I’m talking about the striker reset spring. It’s inside the striker assembly. The circled spring is the striker safety spring. Edited February 19, 2021 by Rich406 Link to comment Share on other sites More sharing options...
echotango Posted February 19, 2021 Share Posted February 19, 2021 35 minutes ago, Rich406 said: No. I’m talking about the striker reset spring. It’s inside the striker assembly. The circled spring is the striker safety spring. Thanks. Link to comment Share on other sites More sharing options...
hiflyer51 Posted February 19, 2021 Share Posted February 19, 2021 On one of my 2 Legions the Take Down Lever broke aprox. 15K rounds. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now