This showed up on my doorstep tonight. The Timney Glock Alpha competition trigger. Nice of the. To include the small flathead to help with maneuvering the spring leg. Also has the hex to tighten the sear housing to the ejector housing. And a hex to adjust the trigger pretravel. Limited adjustment if you want the trigger safety to engage.
First look at the trigger bar out of the package, my opinion, i wished they cleaned up the burr from what I’m guessing is from the stam
For those worrying about the sluggish or sticking reset, don’t. It’s not the trigger causing it, it’s just much more sensitive to any friction since it doesn’t have a strong firing pin spring helping it reset.If you feel there’s any sort of drag, binding or sticking, you may need to tune the connector. It is bent outwards a little to much pushing the trigger bar against the frame. You can check this by just taking the slide off, give the trigger a feel pulls/reset and note and drag, push the con