gethirt Posted January 16, 2021 Share Posted January 16, 2021 I just acquired a new staccato p duo and it is equipped with a Trijicon RMR. it seems like if I keep that gun lubed, the red dot gets covered in oil after a mag or two. Any recommendations? Should I switch to grease? Link to comment Share on other sites More sharing options...
looking4reloadingdeals Posted January 16, 2021 Share Posted January 16, 2021 On my CO S2 (slide mounted red dot) I realized when I over lube the gun I have the same problem. I just simply started using less lube, and none on the barrel near the ejection port. I found that to be the worst location to put lube when using an optic. I also found that I only the issue for 2-3 stages or so if I do overlube it. If I see it on one stage I’ll take down the gun and remove some lube before the next one. Link to comment Share on other sites More sharing options...
jcc7x7 Posted January 16, 2021 Share Posted January 16, 2021 Use a light amount of grease on the lugs, it doesn't splatter around like oil. So the optic usually stays clean Oil on the rails etc Works for me in CO division. Link to comment Share on other sites More sharing options...
Bakerjd Posted January 17, 2021 Share Posted January 17, 2021 15 hours ago, jcc7x7 said: Use a light amount of grease on the lugs, it doesn't splatter around like oil. So the optic usually stays clean Oil on the rails etc Works for me in CO division. Same. Link to comment Share on other sites More sharing options...
ChuckS Posted January 17, 2021 Share Posted January 17, 2021 Slide Glide on the barrel. https://forums.brianenos.com/store/ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now