Tanfo Barrel reamer.

[Swglock34]

So I'm either not using the proper search phrase or words or just can't find it.  Is any one reaming their own barrels to increase OAL and if so what reamer are you using or is everyone sending them out to be done.  Thanks in advance.  

[aandabooks]

I ream my own and have the reamer that Brownell's sells.  Solid Carbide.  Don't try to go cheap with a HSS.  I've done several of my own and lent out the reamer once.  Still very sharp.

[Swglock34]

55 minutes ago, aandabooks said:

I ream my own and have the reamer that Brownell's sells.  Solid Carbide.  Don't try to go cheap with a HSS.  I've done several of my own and lent out the reamer once.  Still very sharp.

thanks, I’ll take a look in their website. Do you happen to know which manufacturer it is??

[texasdawg]

The one you are wanting is known as a "throating reamer". I got mine from Manson direct. I've done two Tanfo barrels and it's still sharp.

[aandabooks]

3 hours ago, Swglock34 said:

thanks, I’ll take a look in their website. Do you happen to know which manufacturer it is??

Manson

[PhilTerry]

Manson also, very helpful company discussed exactly what I needed through e-mail and then shipped it to me in France within a week.

Edited November 16, 2020 by PhilTerry
Added detail

[George16]

Or you can contact @Memphismechanic and send it to him for reaming. He did a great job reaming my three Czechmate barrels and I can now load up to 1.175” if I want to. I load to 1.165” OAL now.

[Swglock34]

Thanks to everyone who has responded.  Much appreciated.  

[tdp88]

Patriot Defense did both of mine and turn around was less than 24 hours.