Jump to content
Brian Enos's Forums... Maku mozo!

stock 2 optic


tanfo_timmy
 Share

Recommended Posts

That was the question that ended the Stock II Optic thread just down a little from this one. None of the provided plates are for Trijicon, and the slide cut itself will take the RTS2/STS2/Vortex Razor. I have not found any aftermarket adapters for the Stock II. 

Link to comment
Share on other sites

These are the only adapters I've seen for the Stock 2 OR so far, but sadly still no RMR/SRO pattern. Also, unsure if the overhang of the SRO would prevent it front sitting in the cutout, depending on how deep the slide cut is.

 

https://benstoegerproshop.com/tanfoglio-burris-fastfire-vortex-venom-viper-red-dot-optic-adapter-plate/

https://benstoegerproshop.com/tanfoglio-leupold-deltapoint-pro-red-dot-optic-adapter-plate/

https://benstoegerproshop.com/tanfoglio-sig-romeo-1-red-dot-optic-adapter-plate/

Link to comment
Share on other sites

  • 1 month later...
On 7/28/2020 at 10:19 PM, OPENB said:

That was the question that ended the Stock II Optic thread just down a little from this one. None of the provided plates are for Trijicon, and the slide cut itself will take the RTS2/STS2/Vortex Razor. I have not found any aftermarket adapters for the Stock II. 

The Stock 2 OR will not accept the RTS2. the optic is to long. Mine will be on it's way to PD shorty to have this fixed. 

Link to comment
Share on other sites

On 9/29/2020 at 9:15 PM, KlausN said:

Any news on the SRO compatibly? 

Nope. And other then the normal stuff for a stock 2 nothing is offered as of yet. The only reason I even went for the stock 2 was i thought a RTS2 was direct fit. I'd have went with a shadow 2 if i knew I'd have to mill the slide anyways. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...