lfine Posted May 15, 2020 Share Posted May 15, 2020 I have a 2011 without thumbrest mounting holes that would need to be drilled/tapped for this. Any recommendations for who/where would do a good job on a quality and expensive piece? The smith who built it doesn't do it. Thanks. Link to comment Share on other sites More sharing options...
OnVacation Posted May 18, 2020 Share Posted May 18, 2020 Most mounts are a simple mill, drill, and tap ordeal. A competent machinist with a mill should be able to knock it out if you have the dimensions. Probably minimum shop time involved. Link to comment Share on other sites More sharing options...
yigal Posted May 18, 2020 Share Posted May 18, 2020 for 4 tap. holes on milling machine with all preparations for 2011 frame it's ~1 hour work with few cups of coffee . i know shooters that can do this in 5 minutes ,but to fix this job will take much more time and money . i use to make 4 m4x0.7 tap. holes with 10mm distance on 2011 frame. and i never charge myself for Tanfoglio it's totally different game. Link to comment Share on other sites More sharing options...
mvmojo Posted May 18, 2020 Share Posted May 18, 2020 Before drilling/tapping your frame, take a look at the NitroFin 2.0 integrated slide stop/thumb rest. I use one on my SteelMaster and really like the angle of the thumb rest. It's not as steep of an angle as most of the thumb rests that attach by screws. Link to comment Share on other sites More sharing options...
yigal Posted May 18, 2020 Share Posted May 18, 2020 this one is from RC much better. Link to comment Share on other sites More sharing options...
tomjerry1 Posted May 19, 2020 Share Posted May 19, 2020 +1 for tigal, I have these on my open and limited pistols. I like where my thumb rests better than the other style. No mod to the pistol, but will take some work to fit the pistol. Link to comment Share on other sites More sharing options...
lfine Posted May 20, 2020 Author Share Posted May 20, 2020 Won’t be doing this myself, unfortunately. Where do you get the RC version? Link to comment Share on other sites More sharing options...
yigal Posted May 20, 2020 Share Posted May 20, 2020 2 hours ago, lfine said: Won’t be doing this myself, unfortunately. Where do you get the RC version? https://cesar-shop.com/firearm-parts/pistol/frame-parts/slide-stop-thumb-rest-bul-logo/ Link to comment Share on other sites More sharing options...
lfine Posted May 20, 2020 Author Share Posted May 20, 2020 Thanks, Did you find much fitting required? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now