Tunachaser Posted April 29, 2020 Share Posted April 29, 2020 Any recommendations for someone to mill the slide on my SP-01? Looking to try USPSA CO div. This places says they mill to a press fit. Brekke Custom LLC Link to comment Share on other sites More sharing options...
rojo1911 Posted April 29, 2020 Share Posted April 29, 2020 Try Primary Machine. They do great work and mill a lot of CZ. http://primarymachine.com/ Link to comment Share on other sites More sharing options...
DesertTortoise Posted April 29, 2020 Share Posted April 29, 2020 Patriot defense did mine a few weeks ago.Good job, fast turn around. When I compared costs, everyone was about the same. Link to comment Share on other sites More sharing options...
EarlKeese Posted April 29, 2020 Share Posted April 29, 2020 Primary Machine. Link to comment Share on other sites More sharing options...
mveto Posted April 29, 2020 Share Posted April 29, 2020 I went with CZC and had them install the RDS plate system on my SP-01, I like the ability to change optics if I want. I originally had a Venom mounted but ended up switching to an SRO when they came out. That is usually not an option if you don’t have a plate system. Link to comment Share on other sites More sharing options...
PrimaryBruce Posted April 29, 2020 Share Posted April 29, 2020 We'd love to take care of it for you, OP. Shoot me an email if you have any questions. Thanks! Link to comment Share on other sites More sharing options...
Silverscooby27 Posted April 29, 2020 Share Posted April 29, 2020 Um...how about CZ Custom or Cajun Gunworks? Link to comment Share on other sites More sharing options...
Joedirt199 Posted April 29, 2020 Share Posted April 29, 2020 Can't go wrong with Primary Machine. Fast turnaround, tight milled pocket, flawless cerakote. Have 2 P-series CZs done by them and just sent off a glock slide. Link to comment Share on other sites More sharing options...
Tunachaser Posted April 29, 2020 Author Share Posted April 29, 2020 Thanks for all the replies, too many options. LOL Link to comment Share on other sites More sharing options...
rooster Posted April 29, 2020 Share Posted April 29, 2020 Primary Machine, they did my g17, even did rear serrations for no charge. They did the black nitride and after a couple of thousand rounds there still is not a hint of wear on finish. Link to comment Share on other sites More sharing options...
MoRivera Posted April 29, 2020 Share Posted April 29, 2020 (edited) Had CZ Custom do mine. Worked out fine. About six weeks. Edited April 29, 2020 by MoRivera Link to comment Share on other sites More sharing options...
igolfat8 Posted April 29, 2020 Share Posted April 29, 2020 Primary did mine and I am thrilled with the quality of service, machine work, cerakoting and turnaround time. Link to comment Share on other sites More sharing options...
CharlieD Posted April 29, 2020 Share Posted April 29, 2020 Primary Machine, you can’t beat the quality, turn around time, or price. Link to comment Share on other sites More sharing options...
SGT_Schultz Posted April 30, 2020 Share Posted April 30, 2020 11 hours ago, Tunachaser said: Any recommendations for someone to mill the slide on my SP-01? Looking to try USPSA CO div. This places says they mill to a press fit. Brekke Custom LLC There's no such thing as a "zero tolerance" fit. There is such a thing as a "zero clearance" fit. And to positively make sure there is zero clearance between the cut and the optic, the cut has to be ever so slightly undersized and the optic then forced in or the slide heated slightly, the dot installed while the slide is expanded, then the slide contracts around the optic closing all clearance and locking it in. Anything else and there IS clearance between the mating parts. Link to comment Share on other sites More sharing options...
GeneBray Posted April 30, 2020 Share Posted April 30, 2020 CZ Custom did mine. Good job. Turn around maybe a little slow. But I was not in a hurry so did not pay a lot of attention to time. Cajun Gun Works andPrimary Machine both have numerous positive comments. Don’t recall a negative for either. Probably cannot go wrong with either of these three. Also, certainly not saying these are the only places that can do a great job. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Boomstick303 Posted April 30, 2020 Share Posted April 30, 2020 I do not own a CZ, but I was curious if anyone knew if since the there is essentially no weight limit in CO anymore, has this changed the way these companies are machining the slides to attach the optic of the Shadow's now they do not have to get the gun under weight to compete in CO? Link to comment Share on other sites More sharing options...
TeedOff Posted April 30, 2020 Share Posted April 30, 2020 Any recommendations for someone to mill the slide on my SP-01? Looking to try USPSA CO div. This places says they mill to a press fit. Brekke Custom LLCAaron did one of my Shadow 2s. The fit is indeed very precise. Quick turnaround too, but I’m local so I just dropped it off and picked it up. Highly recommend his work. Link to comment Share on other sites More sharing options...
GeneBray Posted April 30, 2020 Share Posted April 30, 2020 I do not own a CZ, but I was curious if anyone knew if since the there is essentially no weight limit in CO anymore, has this changed the way these companies are machining the slides to attach the optic of the Shadow's now they do not have to get the gun under weight to compete in CO?Think that would depend on specific model of pistol. Believe Shadow 2s were difficult to make weight. Now no problem. Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
pcar157 Posted May 28, 2020 Share Posted May 28, 2020 I have a CZ 75 Bull Shadow OR from CZC. What I love about this gun is the milled slide with the CZC plates that can fit numerous optics. I think as long as the optics manufacturers continue to make so many different footprints it makes sense to go with a plate system in lieu of a direct mount. The plates are just 3.12 mm thick +/- so the little bit extra in thickness is minimal. And the ability to change optics from different manufacturers I see as a huge benefit. Link to comment Share on other sites More sharing options...
gunz213 Posted May 29, 2020 Share Posted May 29, 2020 I had a spare slide for my Shadow 2 milled by CZ Custom for their plate system. I’ve had direct milled guns before, but I have come to prefer having to option to change sights in the event that a better optic becomes available. Link to comment Share on other sites More sharing options...
Tunachaser Posted May 29, 2020 Author Share Posted May 29, 2020 (edited) Went with Brekke Custom and am happy with the work. Plate is about 4 MM thick and blends in nicely. Edited May 29, 2020 by Tunachaser Link to comment Share on other sites More sharing options...
BrazeauRacing Posted May 30, 2020 Share Posted May 30, 2020 (edited) I'm also looking to get my SP-01 milled for an optic as it is my last non-optic gun that I own. I had CZ Custom do my Shadow 2 and recently switched from a Burris FF3 to a Trijicon SRO simply by switching out the plate. The SRO still sits fairly low on the slide even with a plate system. I also had my P-09 milled for an SRO by Jagerwerks because I liked the SRO so much. Since my SP-01 is not a Shadow, I'm concerned with how high the plate system will sit on the slide. Looking for other options for the SP-01. Edited May 30, 2020 by BrazeauRacing Link to comment Share on other sites More sharing options...
usmc1974 Posted June 10, 2020 Share Posted June 10, 2020 On 4/29/2020 at 10:39 AM, PrimaryBruce said: We'd love to take care of it for you, OP. Shoot me an email if you have any questions. Thanks! I was thinking about having my CZ sp-01 Phantom milled for a Red Dot. Do you use direct slide method or mounting plate I'd like the price and turnaround time. Thanks B Link to comment Share on other sites More sharing options...
PrimaryBruce Posted June 10, 2020 Share Posted June 10, 2020 11 hours ago, usmc1974 said: I was thinking about having my CZ sp-01 Phantom milled for a Red Dot. Do you use direct slide method or mounting plate I'd like the price and turnaround time. Thanks B Direct to slide. Check out pricing on our website. Giving prices here on the forum is frowned upon. Link to comment Share on other sites More sharing options...
vluc Posted June 10, 2020 Share Posted June 10, 2020 Who does a plate system? I'm curious, I use the Glock MOS so I can switch optics if I choose. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now