minnesota1 Posted April 1, 2020 Share Posted April 1, 2020 I've put a nick or two in my AR Receivers over the years and thought that there may be something out there to spot treat them a bit. Just curious, I can live with them as they are working guns so I expect scratches etc. But if I can help preserve them a bit I'll do it. Thanks. Link to comment Share on other sites More sharing options...
lwink Posted April 1, 2020 Share Posted April 1, 2020 I've used something as simple as sharpie for small surface scratches on receivers and scopes before. Next step up that actually lasts on handled parts in my mind is: https://www.foreinnovations.com/product_p/pen_black.htm There are homebrew anodization kits as well, but I've never experimented with them. https://www.caswellplating.com/anodize-touch-up-kit.html I'd rather just dive in and do the whole thing as a diy duracoat, alumahyde, etc. Had good luck with those if care is taken and you have basic tools and a place to work. Link to comment Share on other sites More sharing options...
TonytheTiger Posted April 1, 2020 Share Posted April 1, 2020 I like to hide the scratches. With more scratches. Link to comment Share on other sites More sharing options...
Talon75 Posted April 1, 2020 Share Posted April 1, 2020 (edited) Birchwood Casey makes aluminum black, comes in a pen or a bottle depending on how much you need . Looks like it's the same as the Caswell plating stuff with similar results. Edited April 1, 2020 by Talon75 Link to comment Share on other sites More sharing options...
practical_man Posted April 1, 2020 Share Posted April 1, 2020 krylon in the color of your choice Link to comment Share on other sites More sharing options...
lwink Posted April 2, 2020 Share Posted April 2, 2020 17 hours ago, Talon75 said: Birchwood Casey makes aluminum black, comes in a pen or a bottle depending on how much you need . Looks like it's the same as the Caswell plating stuff with similar results. Talon that's the stuff I was actually looking for, have some birchwood casey touch up stuff. Assume it's all the same from different manufacturers just a different label. 21 hours ago, TonytheTiger said: I like to hide the scratches. With more scratches. Tony - the never fail solution!!! And the cheapest option! Link to comment Share on other sites More sharing options...
TonytheTiger Posted April 2, 2020 Share Posted April 2, 2020 36 minutes ago, lwink said: Tony - the never fail solution!!! And the cheapest option! I'm a simple man.. Link to comment Share on other sites More sharing options...
AHI Posted April 2, 2020 Share Posted April 2, 2020 sand paper IE more scratches Link to comment Share on other sites More sharing options...
zombywoof Posted April 3, 2020 Share Posted April 3, 2020 First thing I do is throw it down the driveway. That way I don't have to worry about such things. It's only an AR dude. Link to comment Share on other sites More sharing options...
ltdmstr Posted April 3, 2020 Share Posted April 3, 2020 Rustoleum textured black is almost an exact match for AR anodizing. Downside is it doesn't adhere very well, so any wear surfaces will rub off pretty quick. Link to comment Share on other sites More sharing options...
usmc1974 Posted April 3, 2020 Share Posted April 3, 2020 I'm a Marine, My AR Have orders not to get scratches Link to comment Share on other sites More sharing options...
Nathanb Posted April 3, 2020 Share Posted April 3, 2020 On 3/31/2020 at 11:13 PM, TonytheTiger said: I like to hide the scratches. With more scratches. This is how I roll. Link to comment Share on other sites More sharing options...
NMBOpen Posted April 4, 2020 Share Posted April 4, 2020 Got my Firebird billet receiver in the white, sent it off to Ion Bond, along with the barrel and comp from JP. Only shows wear when there are parts that impact on each other, like the back radius just below the buffer tube. About eleven years of use at least twice a month. Link to comment Share on other sites More sharing options...
Matt1911 Posted April 4, 2020 Share Posted April 4, 2020 Scratches add character, but if you're really worried about showing your guns get used, use alumiblack. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted April 4, 2020 Share Posted April 4, 2020 On 3/31/2020 at 10:13 PM, TonytheTiger said: I like to hide the scratches. With more scratches. Yes. I find gravel to be the preferred medium. Worn guns are sexy guns. Link to comment Share on other sites More sharing options...
LuvDog Posted April 4, 2020 Share Posted April 4, 2020 I’ve never even considered hiding scratches on any of my ARs. Link to comment Share on other sites More sharing options...
12glocks Posted April 4, 2020 Share Posted April 4, 2020 Nothing. Link to comment Share on other sites More sharing options...
AmosM223 Posted April 14, 2020 Share Posted April 14, 2020 x2 Birchwood Casey Aluminum Black. Matches pretty well. Great for touching up little nicks in the finish. Link to comment Share on other sites More sharing options...
Limitless13 Posted April 15, 2020 Share Posted April 15, 2020 I can vouch for the Birchwood Casey stuff too. Works great for the little stuff. Link to comment Share on other sites More sharing options...
22 shooter Posted April 15, 2020 Share Posted April 15, 2020 I like new stuff. Especially when it gets old. Link to comment Share on other sites More sharing options...
Ssanders224 Posted April 15, 2020 Share Posted April 15, 2020 On 3/31/2020 at 9:39 PM, minnesota1 said: I've put a nick or two in my AR Receivers over the years.... they are working guns... These two statements are at odds with each other. Link to comment Share on other sites More sharing options...
OnVacation Posted May 6, 2020 Share Posted May 6, 2020 think of them not as scratches, but as slowly acquiring a custom "battleworn" finish. Link to comment Share on other sites More sharing options...
71Commander Posted May 12, 2020 Share Posted May 12, 2020 Nothing. Link to comment Share on other sites More sharing options...
Tampa-XD45 Posted June 25, 2020 Share Posted June 25, 2020 On 3/31/2020 at 10:39 PM, minnesota1 said: I've put a nick or two in my AR Receivers over the years and thought that there may be something out there to spot treat them a bit. Just curious, I can live with them as they are working guns so I expect scratches etc. But if I can help preserve them a bit I'll do it. Thanks. Here's a recent demo: https://www.arbuildjunkie.com/fix-scratches-ar-15/ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now