muncie21 Posted March 21, 2020 Share Posted March 21, 2020 I just noticed 2011 parts made by Bul Armory are now available. For example shooter's connection lists quite a few Bul made parts, to include modular triggers similar to the SV design. Anyone have experience with these parts in non- Bul 2011 pistols? I'm considering picking up a trigger and maybe a SS grip if it will accept standard 2011 mags. Link to comment Share on other sites More sharing options...
yigal Posted March 21, 2020 Share Posted March 21, 2020 i installed this trigger few months ago in STI dvc limited. it still works. Link to comment Share on other sites More sharing options...
forty5cal1911 Posted March 21, 2020 Share Posted March 21, 2020 Was looking at some of their parts at Shooters connection the other day as well. Would love to hear some feedback from anyone whose used any of their parts. They look to be good quality and some of their race guns do look real pretty. Anyone know if their small parts are barstock, mim, cast? Link to comment Share on other sites More sharing options...
yigal Posted March 21, 2020 Share Posted March 21, 2020 42 minutes ago, forty5cal1911 said: Was looking at some of their parts at Shooters connection the other day as well. Would love to hear some feedback from anyone whose used any of their parts. They look to be good quality and some of their race guns do look real pretty. Anyone know if their small parts are barstock, mim, cast? in their guns mim parts from 1.1 .2019 : 1.ejector 2. slide stop pin 3. firing pin stop plate 4. mag catch release. 5. thumb safety 6. beaver tail new sear and disco are better quality than from EE. saw only few slide stop break in place where it catch the slide. Link to comment Share on other sites More sharing options...
forty5cal1911 Posted March 21, 2020 Share Posted March 21, 2020 (edited) 47 minutes ago, yigal said: in their guns mim parts from 1.1 .2019 : 1.ejector 2. slide stop pin 3. firing pin stop plate 4. mag catch release. 5. thumb safety 6. beaver tail new sear and disco are better quality than from EE. saw only few slide stop break in place where it catch the slide. Thanks Yigal! You mind expanding on your thoughts that their sear is "better" than an EE? I have always regarded extreme as very high quality and my experience is their sears hold jobs for thousands and thousands of rounds. Edited March 21, 2020 by forty5cal1911 Link to comment Share on other sites More sharing options...
Hooked Posted March 21, 2020 Share Posted March 21, 2020 I’ve purchased their tool-less guide rod and their Aftec style extractor. The tool-less guide rod is not as well finished as the Dawson. It is not as well polished. I would stick with the Dawson. The extractor is a great design and much easier to install than the Aftec. It was a drop in part for my gun and no tuning required. Time will tell if it holds up as well as the Aftec. Link to comment Share on other sites More sharing options...
yigal Posted March 21, 2020 Share Posted March 21, 2020 1 hour ago, Hooked said: I’ve purchased their tool-less guide rod and their Aftec style extractor. The tool-less guide rod is not as well finished as the Dawson. It is not as well polished. I would stick with the Dawson. The extractor is a great design and much easier to install than the Aftec. It was a drop in part for my gun and no tuning required. Time will tell if it holds up as well as the Aftec. i don't know about their tool less GR because i use regular tungsten GR. EE parts are great but u need to remove all sharp corners from their parts. bul sear and disco don't have any burs and sharp corners. about extractor u mean this with 2 springs? how many did u shot with this part? i have only few prototypes of this extractor not from SS. and i don't know how it will hold. Link to comment Share on other sites More sharing options...
caspian guy Posted March 21, 2020 Share Posted March 21, 2020 1 hour ago, Hooked said: I’ve purchased their tool-less guide rod and their Aftec style extractor. The tool-less guide rod is not as well finished as the Dawson. It is not as well polished. I would stick with the Dawson. The extractor is a great design and much easier to install than the Aftec. It was a drop in part for my gun and no tuning required. Time will tell if it holds up as well as the Aftec. I'll be curious to get my hands on one of those extractors and give it a try. I have used aftecs in my open guns for years but haven't been as pleased with the last couple I have got. Link to comment Share on other sites More sharing options...
WRCartridgeco Posted March 22, 2020 Share Posted March 22, 2020 I’m looking for a seller of their M5 pistols, I own a couple, and wouldn’t mind another Link to comment Share on other sites More sharing options...
muncie21 Posted March 26, 2020 Author Share Posted March 26, 2020 Since I'm stuck at home for the near term, I decided what the hell and ordered one of the Bul 2011 triggers and a few extra inserts. As long as my outdoor range stays open, I'll be able to test this out in a few weeks. Link to comment Share on other sites More sharing options...
SSGJohnV Posted March 27, 2020 Share Posted March 27, 2020 We are getting a big shipment of the modular triggers in today. I just installed one in my single stack 1911 and I'm liking it so far. I THINK you can change shoes out without removing the trigger. If anyone wants some up close pictures of certain parts we have in stock, just message us on our Facebook page, or mention it here. I handle the ordering and made sure to order ONLY the machined parts, if it was an option. The sear especially seems well made. Link to comment Share on other sites More sharing options...
caspian guy Posted March 27, 2020 Share Posted March 27, 2020 26 minutes ago, SSGJohnV said: We are getting a big shipment of the modular triggers in today. I just installed one in my single stack 1911 and I'm liking it so far. I THINK you can change shoes out without removing the trigger. If anyone wants some up close pictures of certain parts we have in stock, just message us on our Facebook page, or mention it here. I handle the ordering and made sure to order ONLY the machined parts, if it was an option. The sear especially seems well made. Do you happen to know when that new extractor they have been showing might become avaliable? Link to comment Share on other sites More sharing options...
yigal Posted March 27, 2020 Share Posted March 27, 2020 1 hour ago, SSGJohnV said: We are getting a big shipment of the modular triggers in today. I just installed one in my single stack 1911 and I'm liking it so far. I THINK you can change shoes out without removing the trigger . The sear especially seems well made. 1. yes u can change shoes without removing the trigger .but few of them that i saw it was not possible.and u will need remove the over travel screw and set it again. i use this type prototype trigger but i can change the shoes in 20 sec. without change or tuning nothing . 2. sear and disco is very well made and u can use it as a drop in part with no problem. Link to comment Share on other sites More sharing options...
SSGJohnV Posted March 27, 2020 Share Posted March 27, 2020 51 minutes ago, caspian guy said: Do you happen to know when that new extractor they have been showing might become avaliable? We should be getting them in the next month-ish. They are coming from Israel and they are on lockdown with the current situation. Link to comment Share on other sites More sharing options...
muncie21 Posted March 28, 2020 Author Share Posted March 28, 2020 22 hours ago, SSGJohnV said: We should be getting them in the next month-ish. They are coming from Israel and they are on lockdown with the current situation. Any plans to start stocking the Bul SS grip kits? Link to comment Share on other sites More sharing options...
dansedgli Posted June 29, 2020 Share Posted June 29, 2020 On 3/22/2020 at 3:09 AM, Hooked said: I’ve purchased their tool-less guide rod and their Aftec style extractor. The tool-less guide rod is not as well finished as the Dawson. It is not as well polished. I would stick with the Dawson. The extractor is a great design and much easier to install than the Aftec. It was a drop in part for my gun and no tuning required. Time will tell if it holds up as well as the Aftec. My friend broke his bul pivoting extractor yesterday. Seems like cast metal garbage. It broke off at the firing pin stop. Link to comment Share on other sites More sharing options...
yigal Posted June 29, 2020 Share Posted June 29, 2020 3 hours ago, dansedgli said: My friend broke his bul pivoting extractor yesterday. Seems like cast metal garbage. It broke off at the firing pin stop. it's not cast metal . poor metal treatment. and they change design in this particular place. this notch has u shape now. Link to comment Share on other sites More sharing options...
dansedgli Posted June 29, 2020 Share Posted June 29, 2020 It sure looked like it. Very porous. He only bought it last week. Its a shame we are getting old stock already in Australia. It was supposed to fix the extraction problems he was having with the stock extractor. Link to comment Share on other sites More sharing options...
yigal Posted June 29, 2020 Share Posted June 29, 2020 (edited) 42 minutes ago, dansedgli said: It sure looked like it. Very porous. He only bought it last week. Its a shame we are getting old stock already in Australia. It was supposed to fix the extraction problems he was having with the stock extractor. porous ? it's made from SS or black carbon steel? mine is black without u shape 2 y. old ask them for new one. Australia .where is this island ? Edited June 29, 2020 by yigal Link to comment Share on other sites More sharing options...
dansedgli Posted June 29, 2020 Share Posted June 29, 2020 I'm not a metal expert but Ill try to get a photo of it. I didnt take one yesterday. Link to comment Share on other sites More sharing options...
Hooked Posted June 29, 2020 Share Posted June 29, 2020 Mine broke in the same spot. Received a new one from the distributor under warranty and sold it. Went back to an Aftec. Link to comment Share on other sites More sharing options...
yigal Posted June 29, 2020 Share Posted June 29, 2020 it's SS. very porous Link to comment Share on other sites More sharing options...
dansedgli Posted June 29, 2020 Share Posted June 29, 2020 Yeah it looked like that. Link to comment Share on other sites More sharing options...
cheers623 Posted July 5, 2020 Share Posted July 5, 2020 Have first hand experience with the trigger modules and sears...so far, so good! Link to comment Share on other sites More sharing options...
Tophernj Posted July 6, 2020 Share Posted July 6, 2020 On 3/22/2020 at 7:28 PM, WRCartridgeco said: I’m looking for a seller of their M5 pistols, I own a couple, and wouldn’t mind another Iconic Arms in Englewood Cliffs, NJ sells the BUL Armory stuff. Give them a shout. https://iconicrms.com/ He is a buddy of mine, full transparency. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now