Revofan Posted March 17, 2020 Share Posted March 17, 2020 Looking for minor PF load data for 95gr bullets 9mm case Powders I have are wst and VV n320 Link to comment Share on other sites More sharing options...
Rallyx100 Posted March 18, 2020 Share Posted March 18, 2020 I have loaded some 95gr precision coated at around 1.070 with 4.9gr of sport pistol, depending on bullet being grooved you may be able to go as long as 1.100 for a revolver but I'm loading for a CZ chamber also. Sport pistol is somewhere around burn rate for n320 but not alot of data to compare, I have have had some success but SD are not great at 70 and 114 FP. I assume you are shooting a revo, they would probably be ok for steel challenge. Mileage may vary. Link to comment Share on other sites More sharing options...
Revofan Posted March 18, 2020 Author Share Posted March 18, 2020 I’m using a custom open gun for steel Challenge and want to find an accurate fluff load Link to comment Share on other sites More sharing options...
Timido Posted March 18, 2020 Share Posted March 18, 2020 I just ordered some 95g jhp to try the same thing with a comp. I came access this article and am going to do similar testing with slow powders for steel challenge https://waynematteson.wordpress.com/2017/04/20/adventures-in-open-minor/ Link to comment Share on other sites More sharing options...
Scootertheshooter Posted March 18, 2020 Share Posted March 18, 2020 I’m looking for the same info Link to comment Share on other sites More sharing options...
igolfat8 Posted March 19, 2020 Share Posted March 19, 2020 5.2 N320 @1.030”=130 PF If you want a super soft load, 3.8 grains SP or N320 = 97 PF Link to comment Share on other sites More sharing options...
Rallyx100 Posted March 19, 2020 Share Posted March 19, 2020 (edited) This is chrono data for 4.7 & 4.9gr of Sport Pistol with 95gr Precision coated bullets.. not jacketed. https://precisionbullets.com/product/380-95-rn/ The OAL is short to shoot in a short CZ chamber, with no comp. And a stock 1911 Edited March 19, 2020 by Rallyx100 Correction Link to comment Share on other sites More sharing options...
Revofan Posted March 19, 2020 Author Share Posted March 19, 2020 10 hours ago, igolfat8 said: 5.2 N320 @1.030”=130 PF If you want a super soft load, 3.8 grains SP or N320 = 97 PF I tried a 4.8gr n320 load and had horrible accuracy Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now