Russty Posted March 11, 2020 Share Posted March 11, 2020 I installed the CGW T2 disconnector in my CZ 75 SP01Tactical and now the trigger only pulls when the gun is cocked with the hammer only. Racking the slide causes the trigger to move back to single action, but the trigger cannot be pulled. If I use the decocker, I can pull the trigger. I can also pull the hammer back to pull the trigger, or fire it double action, but its a no go if I just rack the slide. I had previously installed a floating trigger pin and CGW Ultra Lite Kit without issue. Any ideas? Thanks! Link to comment Share on other sites More sharing options...
mveto Posted March 11, 2020 Share Posted March 11, 2020 (edited) I’m pretty sure the issue is due to not having the SRS-1 or 2 kit installed. Just my thought. Edited March 11, 2020 by mveto Link to comment Share on other sites More sharing options...
Russty Posted March 12, 2020 Author Share Posted March 12, 2020 Hmm, I missed that, thanks. Link to comment Share on other sites More sharing options...
Russty Posted March 12, 2020 Author Share Posted March 12, 2020 I failed to notice that I need a new firing pin stop lifter when I install the T2 disconnector. Thankfully, CGW helped me sort it out and the part is on the way!! Link to comment Share on other sites More sharing options...
Russty Posted March 18, 2020 Author Share Posted March 18, 2020 New firing pin stop lifter installed, all is FANTASTIC now! Very short single action pull to break, short quick trigger reset. Thanks, CGW!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now