Timney single stage trigger help

[Jgodwin]

I have an ar9 that I built using a qc10 lower, timney single stage trigger, and a JP 9mm bolt. I’m having issues with the trigger not resetting properly. I think I have it narrowed down, if I pull the trigger and keep the trigger pressed back as the bolt cycles it takes much more force to reset the sear than it does to do the same if the trigger is not held pressed back and it seems like it might be enough of an issue to cause the 1 out of 25 failures I’m having with the gun. Does anyone have any experience with these timney single stage at triggers. Is there possibly an adjust I can make to solve this issue. 
 

Thanks for any help. 

[45 Raven]

I can't answer your question, but my experience with Timney has been 100% positive in the past.

 

You can call them at 866-484-6639 or email them at customerservice@timneyusa.com, and I feel pretty comfortable in saying that they will do all they can to help you solve your issue.

 

Hope that helps, and good luck!

[Jgodwin]

Thanks. I’ll call on Monday. Just wanted to see if there was something simple I was missing.