Maurice Posted July 2, 2020 Share Posted July 2, 2020 I am running a domina with some go fast parts, fitting an egw hammer sear combo currently. I had the barrel reamed to accept 1.165+ oal 124gr ammo. Interesting that the guide rod is short, vs longer in v8’s. Link to comment Share on other sites More sharing options...
Maurice Posted July 2, 2020 Share Posted July 2, 2020 FYI, I got lucky and tried the factory sear (brownish color), with the egw prepped hammer. Even with the heavy hammer spring, trigger went from meh, to great. I was having some fitting challenges with the egw sear. I will still work on it, but for now the brownish Oem sear (Unica) is working out great. Didn’t have to fit it 2 the safety either. Bonus. Link to comment Share on other sites More sharing options...
Johansson81 Posted September 9, 2020 Share Posted September 9, 2020 (edited) I have shot close to 15.000 rounds through my Domina with Extreme internals and a custom comp, not a single issue other than the 170mm mags that are crap. I ended up welding two short mags together to get it to feed properly. 29.5mm OAL with 123gn RN plated bullets, 8.0gn 3n38 and 168-169PF. Runs really flat. My spare one is identical except for the hammer and trigger. No idea why the image turns sideways... Edited September 9, 2020 by Johansson81 Link to comment Share on other sites More sharing options...
Nic_USPSA_C Posted September 9, 2020 Share Posted September 9, 2020 I have 3 open 2011 and I am a fan of CZ, have always thought about adding a Czechmate or Tanfo to my collection. I really like the look of the Domina. The thing that worries me the most are the magazines. Is there a good source for additional magazines? Do 28 round mags run in these guns? Link to comment Share on other sites More sharing options...
Johansson81 Posted September 9, 2020 Share Posted September 9, 2020 (edited) 2 hours ago, Nic_USPSA_C said: I have 3 open 2011 and I am a fan of CZ, have always thought about adding a Czechmate or Tanfo to my collection. I really like the look of the Domina. The thing that worries me the most are the magazines. Is there a good source for additional magazines? Do 28 round mags run in these guns? I bought three of the Tanfoglio 170mm mags and they were crap, feeding issues to no end no matter what kind of mods I did to the lips. Buy two original short mag tubes and have someone cut and weld them together, with the Grams follower I can fit 28 in my welded mags. Aprox. 6000 rounds out of the each of my two 170mm mags so far and not a single issue. Edited September 9, 2020 by Johansson81 Link to comment Share on other sites More sharing options...
Swglock34 Posted September 9, 2020 Share Posted September 9, 2020 Take a look at the Taylor Freelance mag extensions. I'm able to get 28 rounds in. I have not had any issues at all with them. Link to comment Share on other sites More sharing options...
Steppenwolf Posted September 9, 2020 Share Posted September 9, 2020 That whisky bottle is way too small. Get the Macallan 18 out for a better comparison. Link to comment Share on other sites More sharing options...
Maurice Posted September 28, 2020 Share Posted September 28, 2020 Trying some autocomp over a 124gr projectile. 1.16oal, 6.7+ of autocomp gets , me about 1350fps. might bump it up to 6.8. Link to comment Share on other sites More sharing options...
KlausN Posted September 28, 2020 Share Posted September 28, 2020 On 9/9/2020 at 12:56 PM, Swglock34 said: Take a look at the Taylor Freelance mag extensions. I'm able to get 28 rounds in. I have not had any issues at all with them. Same here, TF +10 works fine for me and fits 28. Link to comment Share on other sites More sharing options...
Maurice Posted October 14, 2020 Share Posted October 14, 2020 On 9/9/2020 at 2:25 AM, Johansson81 said: I have shot close to 15.000 rounds through my Domina with Extreme internals and a custom comp, not a single issue other than the 170mm mags that are crap. I ended up welding two short mags together to get it to feed properly. 29.5mm OAL with 123gn RN plated bullets, 8.0gn 3n38 and 168-169PF. Runs really flat. My spare one is identical except for the hammer and trigger. No idea why the image turns sideways... Link to comment Share on other sites More sharing options...
Maurice Posted October 14, 2020 Share Posted October 14, 2020 On 9/9/2020 at 2:25 AM, Johansson81 said: I have shot close to 15.000 rounds through my Domina with Extreme internals and a custom comp, not a single issue other than the 170mm mags that are crap. I ended up welding two short mags together to get it to feed properly. 29.5mm OAL with 123gn RN plated bullets, 8.0gn 3n38 and 168-169PF. Runs really flat. My spare one is identical except for the hammer and trigger. No idea why the image turns sideways... What trigger do you prefer? Xtreme flat? I have the oem and I feel it is too far forward. Link to comment Share on other sites More sharing options...
Johansson81 Posted October 14, 2020 Share Posted October 14, 2020 1 hour ago, Maurice said: What trigger do you prefer? Xtreme flat? I have the oem and I feel it is too far forward. Yup I run the flat trigger, never liked the curved original one. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now