Miggz55 Posted March 3, 2020 Share Posted March 3, 2020 Which do you prefer and why? I currently have an ELS setup and like the fact that you can switch attachments without having to remove the belt, but part of me thinks Techloks would be better stages like all shotgun where you can really customize the position of all your shell holders. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
orangeman711 Posted March 3, 2020 Share Posted March 3, 2020 I use only the ELS system since it came out. Easy to move gear around as needed or completely remove when not needed. Don't need to fight to remove gear from between the inner and outer belt. Link to comment Share on other sites More sharing options...
sam_b Posted March 3, 2020 Share Posted March 3, 2020 I prefer tekloks for the small adjustments I can make. Link to comment Share on other sites More sharing options...
Miggz55 Posted March 3, 2020 Author Share Posted March 3, 2020 I use only the ELS system since it came out. Easy to move gear around as needed or completely remove when not needed. Don't need to fight to remove gear from between the inner and outer belt.My biggest problem is with my pistol mag pouches... if I want them to be at the same height, there is a pretty wide gap between each female ELS Mount. To mount them closer, I need to stagger the height.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
nheiny13 Posted March 8, 2020 Share Posted March 8, 2020 (edited) I like the belt clips from Binary Engineering which accept the ELS fork. They attach to any belt and are able to move around so you can make minor adjustments. Edited March 8, 2020 by nheiny13 Link to comment Share on other sites More sharing options...
Miggz55 Posted March 9, 2020 Author Share Posted March 9, 2020 I like the belt clips from Binary Engineering which accept the ELS fork. They attach to any belt and are able to move around so you can make minor adjustments.Thanks! Will check them out!Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Chip3 Posted March 9, 2020 Share Posted March 9, 2020 https://www.amazon.com/Uncle-Mikes-87713-Competition-X-Large/dp/B00RYMDC0M/ref=pd_cp_200_3/141-0856565-0174822?_encoding=UTF8&pd_rd_i=B00RYMDC0M&pd_rd_r=7d66eb79-c5b9-4c10-9bd4-2d906533aa21&pd_rd_w=sh6Oa&pd_rd_wg=g0gYu&pf_rd_p=4853e837-f87a-46d4-be32-dcf86bff7a7c&pf_rd_r=MPMH8MRVJ8PXDRXNW2J3&psc=1&refRID=MPMH8MRVJ8PXDRXNW2J3 I use one of these. Cut it down to length. Locate where you want the ELS mounts, mark the holes, and take a soldering iron to burn burn through. Works great and belt is cheap enough that if you screw up, just replace it. Link to comment Share on other sites More sharing options...
Miggz55 Posted March 9, 2020 Author Share Posted March 9, 2020 https://www.amazon.com/Uncle-Mikes-87713-Competition-X-Large/dp/B00RYMDC0M/ref=pd_cp_200_3/141-0856565-0174822?_encoding=UTF8&pd_rd_i=B00RYMDC0M&pd_rd_r=7d66eb79-c5b9-4c10-9bd4-2d906533aa21&pd_rd_w=sh6Oa&pd_rd_wg=g0gYu&pf_rd_p=4853e837-f87a-46d4-be32-dcf86bff7a7c&pf_rd_r=MPMH8MRVJ8PXDRXNW2J3&psc=1&refRID=MPMH8MRVJ8PXDRXNW2J3 I use one of these. Cut it down to length. Locate where you want the ELS mounts, mark the holes, and take a soldering iron to burn burn through. Works great and belt is cheap enough that if you screw up, just replace it.Good advice, thanks!Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now