MikeBurgess Posted January 26, 2020 Share Posted January 26, 2020 Any advice on where to send my 627 to repair a broken trigger stud? I would like to get it back both fixed right and inna reasonable time frame. Sent from my SM-N960U using Tapatalk Link to comment Share on other sites More sharing options...
Toolguy Posted January 26, 2020 Share Posted January 26, 2020 I can do just about any mod or custom work there is on a revo. A broken hammer or trigger pivot pin is the one thing I send it to S&W for. The reason is, the new one has to be located within a thousandth or two in all directions for everything to work right. The factory has the drawings and fixtures to get the location exact. Link to comment Share on other sites More sharing options...
Carmoney Posted January 26, 2020 Share Posted January 26, 2020 I've only had this happen once, but the factory fixed it for free. It was a blued gun, and they refinished the frame and everything. Link to comment Share on other sites More sharing options...
MWP Posted January 26, 2020 Share Posted January 26, 2020 (edited) I sent mine back to smith 2 years ago. They charged 200$, had it 6 months and didn’t even fill the frame where they drilled it. Send it to Joe at Mojo. I have a different issue now that only the factory can fix, and I’m trying to find every possible way not to send it to them. Edited January 26, 2020 by MWP Link to comment Share on other sites More sharing options...
MikeBurgess Posted January 26, 2020 Author Share Posted January 26, 2020 Thanks for the recommendations, now to see how quick it can get done. With Nationals 3 months out it may be time for a new 929 Sent from my SM-N960U using Tapatalk Link to comment Share on other sites More sharing options...
mchapman Posted January 27, 2020 Share Posted January 27, 2020 5 hours ago, MWP said: Send it to Joe at Mojo. I second this, send it to MOJO CUSTOM GUNS I have seen a couple that he has fixed and the repair looks way better than the one I seen that smith did. Link to comment Share on other sites More sharing options...
alecmc Posted January 27, 2020 Share Posted January 27, 2020 I havent had one break, but seeing the finished product of repair of the trigger / hammer pin from both S&W and Mojo, i'd be sending mine to mojo. Link to comment Share on other sites More sharing options...
pskys2 Posted January 27, 2020 Share Posted January 27, 2020 Mike knows people! Sent my 627PC back Nov. 11, 2019 for a broken Trigger Stud. Bought it in 2014, they won't warranty it. They have finally responded back with a letter Saturday. $148 for the Crown Stud, they drill the frame out oversize put a flanged stud in and stake it. Looks to me to be a bit more robust on the M28 I had it done to. For another $143 they will make it like original, refinishing is the reason for extra cost, had that done on a M29 that broke. You can't tell it's been replaced. Don't know how long they will take to do it though. Just pray it's done right. I really am liking the Ruger GP100 I now have, might have to think hard about an 8 shot Gp100? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now