Sfisch0311 Posted January 24, 2020 Share Posted January 24, 2020 On 1/22/2020 at 7:15 PM, CHA-LEE said: Here is my Atlas Chaos in slow motion. The dot is staying in the glass through the whole cycle of the slide. This blaster could be even "Flatter" with a heavier hammer spring and less angle on the FPS. I am waiting to get it back from getting Black DLC coated to continue my tuning and load development process. For what its worth, this gun is setup with no popple holes in the barrel and the Atlas 2 port comp. https://www.instagram.com/p/B69vlgXpiKc/?utm_source=ig_web_copy_link That is one flat shooting gun there. I thought mine was flat, boy was I wrong lol. Link to comment Share on other sites More sharing options...
Aircooled6racer Posted January 26, 2020 Share Posted January 26, 2020 Hello: Here is a pic of the firing pin stop that I modify. This one only has around 60,000 rounds or so on it. Thanks, Eric Link to comment Share on other sites More sharing options...
B_Seehawer Posted January 26, 2020 Share Posted January 26, 2020 I bought my gun without popples and was using HS-6. Then I added 2 popples and I switched to AA7. I love the way it feels with the popples and how flat it shoots. Remember though, once you put popples in, you are stuck with them. My recommendation is to start with a small size hole, maybe 2 of them at 3/16” each, then if you want to later go up to 5/32”. You then will have to add more powder and if you’re shouting .38 SC that’s not that big of a deal but it is with 9 major. Might wanna go the other way around, 3/16”>5/32” Link to comment Share on other sites More sharing options...
shred Posted January 26, 2020 Share Posted January 26, 2020 9x25 Dillon's could be setup to recoil down if you wanted. Turned out an extra 3-4 rounds in the mag was better for your score than absolute flatness. Link to comment Share on other sites More sharing options...
Front Man Posted January 26, 2020 Share Posted January 26, 2020 9 X 25 was cruel and unusual for the RO's. Link to comment Share on other sites More sharing options...
Timido Posted January 27, 2020 Share Posted January 27, 2020 On 1/22/2020 at 11:46 AM, CHA-LEE said: Since tuning all of these springs and FPS's is confusing for people I made a video of what all of this stuff does a while ago....... Great Video thanks for sharing that Link to comment Share on other sites More sharing options...
Sfisch0311 Posted February 6, 2020 Share Posted February 6, 2020 On 1/26/2020 at 1:12 PM, B_Seehawer said: Might wanna go the other way around, 3/16”>5/32” Yeah... you right... my bad. Link to comment Share on other sites More sharing options...
Shmella Posted February 7, 2020 Share Posted February 7, 2020 On 1/22/2020 at 7:15 PM, CHA-LEE said: Here is my Atlas Chaos in slow motion. The dot is staying in the glass through the whole cycle of the slide. This blaster could be even "Flatter" with a heavier hammer spring and less angle on the FPS. I am waiting to get it back from getting Black DLC coated to continue my tuning and load development process. For what its worth, this gun is setup with no popple holes in the barrel and the Atlas 2 port comp. https://www.instagram.com/p/B69vlgXpiKc/?utm_source=ig_web_copy_link Your grip is out of this world. Link to comment Share on other sites More sharing options...
Fo0 Posted February 9, 2020 Share Posted February 9, 2020 Any benefits for Popple Holes in a 9mm Glock 34 minor gun for steel challenge Link to comment Share on other sites More sharing options...
perttime Posted February 9, 2020 Share Posted February 9, 2020 1 hour ago, Fo0 said: Any benefits for Popple Holes in a 9mm Glock 34 minor gun for steel challenge You'd get to shoot in the Open Division. Link to comment Share on other sites More sharing options...
Fo0 Posted February 9, 2020 Share Posted February 9, 2020 3 minutes ago, perttime said: You'd get to shoot in the Open Division. can i post in the open section of this forum Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now