Nick_shoots_fast Posted December 22, 2019 Share Posted December 22, 2019 (edited) I don’t have time to test loads in the rifle I’m going to use this in. It’s a basic 16” ar15 shooting a 55g bullet. Edited December 22, 2019 by Atlasguy321 Link to comment Share on other sites More sharing options...
milanuk Posted December 22, 2019 Share Posted December 22, 2019 25 gn H335, pretty universal Sent from my SM-G960U using Tapatalk Link to comment Share on other sites More sharing options...
Paul-the new guy Posted December 24, 2019 Share Posted December 24, 2019 Exactly what I use, I use magnum primers. Link to comment Share on other sites More sharing options...
chevrofreak Posted December 24, 2019 Share Posted December 24, 2019 6 hours ago, Paul-the new guy said: Exactly what I use, I use magnum primers. Probably not a bad idea. I had hangfires with regular SRP and WC-844 which is basically the same powder on anything but my hotter loads. Link to comment Share on other sites More sharing options...
Eric802 Posted December 25, 2019 Share Posted December 25, 2019 I’ve used both Tula and CCI primers with H335 with 100% reliability. Link to comment Share on other sites More sharing options...
Nick_shoots_fast Posted December 27, 2019 Author Share Posted December 27, 2019 On 12/24/2019 at 8:40 PM, Eric802 said: I’ve used both Tula and CCI primers with H335 with 100% reliability. have you tried Tula pistol primers? I got 1k at a gun show but hesitant to use because it’s “Tula” Link to comment Share on other sites More sharing options...
Eric802 Posted December 27, 2019 Share Posted December 27, 2019 3 hours ago, Atlasguy321 said: have you tried Tula pistol primers? I got 1k at a gun show but hesitant to use because it’s “Tula” I haven't, I've just tried the small rifle. I bought them back in the day because they were available and because they were getting a good reputation for accuracy (I believe David Tubb was using them). Link to comment Share on other sites More sharing options...
warpspeed Posted December 27, 2019 Share Posted December 27, 2019 On 12/22/2019 at 7:55 AM, milanuk said: 25 gn H335, pretty universal Sent from my SM-G960U using Tapatalk Same here Link to comment Share on other sites More sharing options...
Beef15 Posted December 27, 2019 Share Posted December 27, 2019 On 12/22/2019 at 10:55 AM, milanuk said: 25 gn H335, pretty universal Sent from my SM-G960U using Tapatalk This functions perfect and shoots ok in my 3 with several different 55gr fmjs, never had an issue with standard small rifle primers. Link to comment Share on other sites More sharing options...
CPD7119 Posted December 28, 2019 Share Posted December 28, 2019 If you're plinking you can't go wrong with the 25gn recommendation above. It's a reliable load that should run your 16in rifle without issue. It works well in both my 20in and 10.3 rifles. Link to comment Share on other sites More sharing options...
Matt1911 Posted December 28, 2019 Share Posted December 28, 2019 25gn of H335 with 55 gn Hornady fmj is what I use in my 18" and 16" rifles. Never had a problem. Link to comment Share on other sites More sharing options...
Pinecone Posted December 31, 2019 Share Posted December 31, 2019 Somehow I ended up using 25.5 grains for many years. I sue CCI450 Magnum primers. They are very similar to the military primer and a less susceptible to a slam fire. Link to comment Share on other sites More sharing options...
vossman Posted January 1, 2020 Share Posted January 1, 2020 24.5g of H335 comes out about 2800fps out of a 16 inch barrel. Link to comment Share on other sites More sharing options...
DIYguy Posted February 24, 2020 Share Posted February 24, 2020 H335 @ 26.2gn Federal 223 case with Federal primer PMC 223 case with Winchester primer Hornady FMJ 55gn 2,930 fps multi string average @ 60° 16" 1:9 barrel CBTO 1.238 Dillon XL650 press Link to comment Share on other sites More sharing options...
Smeeg Posted April 17, 2020 Share Posted April 17, 2020 What kind of accuracy are u guys getting out of 25gr of h335 55gr FMJ out of rack grade ar15”s? Link to comment Share on other sites More sharing options...
SeattleDude Posted April 25, 2020 Share Posted April 25, 2020 my load is 24.5gr of H335 with Win SRP and Hornady 55gr FMJ @ 2.240 I get 2855 out of 16 inch Link to comment Share on other sites More sharing options...
MakBaba Posted April 27, 2020 Share Posted April 27, 2020 (edited) Hornady 55 FMJ @2.205 Mixed cases. CCI400 16" 556 - 24.5=2834 SD-52 25.0=2939 SD-21 20" Wilde- 24.5=3001 SD-55 25.0= 3120 SD-13 Edited April 27, 2020 by MakBaba Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now