HIREDgun45 Posted December 18, 2019 Share Posted December 18, 2019 Anyone use the aluminum 2011 grips from Black Mountain Firearms? Link to comment Share on other sites More sharing options...
Nick_shoots_fast Posted December 18, 2019 Share Posted December 18, 2019 What do they look like? Link to comment Share on other sites More sharing options...
uhmeebuh Posted December 18, 2019 Share Posted December 18, 2019 (edited) A few options: https://www.blackmountainfirearms.com/ Edited December 18, 2019 by uhmeebuh Link to comment Share on other sites More sharing options...
muncie21 Posted December 18, 2019 Share Posted December 18, 2019 I'd consider trying them if they offered a version with more aggressive grip. Also, I wonder if the standard 2011 mag release matches the contour of the grip or if a special design is needed. Link to comment Share on other sites More sharing options...
HIREDgun45 Posted December 18, 2019 Author Share Posted December 18, 2019 5 hours ago, muncie21 said: I'd consider trying them if they offered a version with more aggressive grip. Also, I wonder if the standard 2011 mag release matches the contour of the grip or if a special design is needed. I emailed them about a few things but haven't heard back yet. I asked if their grip can use a STI type magwell, and mag catch. I didn't see them list their own mag catch so I'm assuming it doesn't use a proprietary one. Link to comment Share on other sites More sharing options...
HIREDgun45 Posted December 18, 2019 Author Share Posted December 18, 2019 12 hours ago, Atlasguy321 said: What do they look like? They have 3 versions, plain for skate tape, hex pattern, and their own pattern design. Their grips are only in Aluminum. Link to comment Share on other sites More sharing options...
bulldog009 Posted December 18, 2019 Share Posted December 18, 2019 It says "- Compatible with STI parts" on the listing, so I wonder if a magwell like a Dawson will fit...? Link to comment Share on other sites More sharing options...
jschweg Posted December 27, 2019 Share Posted December 27, 2019 These look really nice, but other than price, is there any reason why you would choose aluminum over steel?Just wondering.Sent from my SM-G960U using Tapatalk Link to comment Share on other sites More sharing options...
HIREDgun45 Posted December 27, 2019 Author Share Posted December 27, 2019 1 hour ago, jschweg said: These look really nice, but other than price, is there any reason why you would choose aluminum over steel? Just wondering. Sent from my SM-G960U using Tapatalk I already have a few steel grips and just wanted to add to the collection. They haven't responded back so I was curious if anyone here has one and can share info on their quality. Link to comment Share on other sites More sharing options...
ARac40 Posted January 12, 2020 Share Posted January 12, 2020 I just ordered one of their plain grips for skater tape. Once I get everything put together, I’ll post an update with answers to the questions if I’m able to do so. Link to comment Share on other sites More sharing options...
HIREDgun45 Posted January 12, 2020 Author Share Posted January 12, 2020 1 hour ago, ARac40 said: I just ordered one of their plain grips for skater tape. Once I get everything put together, I’ll post an update with answers to the questions if I’m able to do so. Much appreciated ARac40! Link to comment Share on other sites More sharing options...
ARac40 Posted February 2, 2020 Share Posted February 2, 2020 Sorry for the delay guys, but I just got the grip this week and was out of town until Saturday night. Overall the grip looks great and the Cerakote Finish is well done. I put the frame on one of my other pistols and it popped right in without any fitting (it was an STI Frame with a TG series serial number). My only concern is that while on the frame, all of my magazines would bind during the last quarter inch of insertion prior to seating. I haven’t messed with it yet, but looks like I have to put a little relief into the rear side of the frame for the magazine to seat comfortably (like the grip angle of the grip is off by a few degrees). In any event, I’m swamped with work at the moment, so hobbies have to take a back seat before I can investigate any further. Overall, The grip is sweet. My Dawson mag release fit right in as did the x-line vario trigger I had laying around. I had a Limcat magwell laying around, but it would not pop right on. Looks like I’d have to relive the front strap to make it fit. let me know if you have any other questions! Link to comment Share on other sites More sharing options...
HIREDgun45 Posted February 3, 2020 Author Share Posted February 3, 2020 5 hours ago, ARac40 said: Sorry for the delay guys, but I just got the grip this week and was out of town until Saturday night. Overall the grip looks great and the Cerakote Finish is well done. I put the frame on one of my other pistols and it popped right in without any fitting (it was an STI Frame with a TG series serial number). My only concern is that while on the frame, all of my magazines would bind during the last quarter inch of insertion prior to seating. I haven’t messed with it yet, but looks like I have to put a little relief into the rear side of the frame for the magazine to seat comfortably (like the grip angle of the grip is off by a few degrees). In any event, I’m swamped with work at the moment, so hobbies have to take a back seat before I can investigate any further. Overall, The grip is sweet. My Dawson mag release fit right in as did the x-line vario trigger I had laying around. I had a Limcat magwell laying around, but it would not pop right on. Looks like I’d have to relive the front strap to make it fit. let me know if you have any other questions! Thanks for the update! Link to comment Share on other sites More sharing options...
bulldog009 Posted February 4, 2020 Share Posted February 4, 2020 On 2/2/2020 at 5:41 PM, ARac40 said: Sorry for the delay guys, but I just got the grip this week and was out of town until Saturday night. Overall the grip looks great and the Cerakote Finish is well done. I put the frame on one of my other pistols and it popped right in without any fitting (it was an STI Frame with a TG series serial number). My only concern is that while on the frame, all of my magazines would bind during the last quarter inch of insertion prior to seating. I haven’t messed with it yet, but looks like I have to put a little relief into the rear side of the frame for the magazine to seat comfortably (like the grip angle of the grip is off by a few degrees). In any event, I’m swamped with work at the moment, so hobbies have to take a back seat before I can investigate any further. Overall, The grip is sweet. My Dawson mag release fit right in as did the x-line vario trigger I had laying around. I had a Limcat magwell laying around, but it would not pop right on. Looks like I’d have to relive the front strap to make it fit. let me know if you have any other questions! So the grip angle... can you elaborate on that? Can you post pictures of the grip with the original grip on top to show the difference? Do you have a Dawson ICE magwell to try and fit on it? Link to comment Share on other sites More sharing options...
sam_b Posted February 5, 2020 Share Posted February 5, 2020 13 hours ago, bulldog009 said: So the grip angle... can you elaborate on that? Can you post pictures of the grip with the original grip on top to show the difference? Do you have a Dawson ICE magwell to try and fit on it? The description on their V3 grip says the ICE is a good choice for their grip. I would assume it needs small fitting, but you may get lucky. https://www.blackmountainfirearms.com/product-page/2011-pistol-grip-v3 Link to comment Share on other sites More sharing options...
bulldog009 Posted February 5, 2020 Share Posted February 5, 2020 (edited) 13 hours ago, sam_b said: The description on their V3 grip says the ICE is a good choice for their grip. I would assume it needs small fitting, but you may get lucky. https://www.blackmountainfirearms.com/product-page/2011-pistol-grip-v3 I noticed that too when I visited the site again yesterday. I don't believe that line in the description was there the first time I looked at the site a few weeks back. I may give ARac40 a little more time to mess with his grip and give some more feedback before I order one. Edited February 5, 2020 by bulldog009 Link to comment Share on other sites More sharing options...
HIREDgun45 Posted February 5, 2020 Author Share Posted February 5, 2020 19 hours ago, sam_b said: The description on their V3 grip says the ICE is a good choice for their grip. I would assume it needs small fitting, but you may get lucky. https://www.blackmountainfirearms.com/product-page/2011-pistol-grip-v3 It seems like the V3 is a new design from them. Hopefully we get more info from ARac40 if the grip angle can be corrected with the relief cut he made. Link to comment Share on other sites More sharing options...
proven Posted February 12, 2020 Share Posted February 12, 2020 (edited) I got one of there V3 grips. It just needed a little extra clearance. Just filed the front and back wall a little on the grip where the mag goes and now it works great. Edited February 12, 2020 by proven Link to comment Share on other sites More sharing options...
HIREDgun45 Posted February 12, 2020 Author Share Posted February 12, 2020 3 hours ago, Onpoint07 said: I got one of there V3 grips. It just needed a little extra clearance. Just filed the front and back wall a little on the grip where the mag goes and now it works great. Hello Onpoint07, which mags are you using? And what brand frame did you attach the grip to? Did it require much fitting? Any pics? Link to comment Share on other sites More sharing options...
tkane Posted February 13, 2020 Share Posted February 13, 2020 Any size comparison of these to say a stock STI plastic grip? I actually run an Extreme Shooter DVC extra small because of my tiny hands, but I tend to bind the mag from falling by squeezing the grip too much during a reload. I don't want the added weight or cost of a steel grip so these look very interesting. Link to comment Share on other sites More sharing options...
ezra650 Posted February 13, 2020 Share Posted February 13, 2020 3 hours ago, tkane said: Any size comparison of these to say a stock STI plastic grip? I actually run an Extreme Shooter DVC extra small because of my tiny hands, but I tend to bind the mag from falling by squeezing the grip too much during a reload. I don't want the added weight or cost of a steel grip so these look very interesting. I'm curious of this as well. I have the same issue. I ended up getting the low paddle thumb safety from EGW so I could reach the trigger better. With all the metal grips out now I wonder if they are using the outside maximum dimension or just as thick as the material needs to be outward from the magwell and grip bushing area. I believe people are saying the limcat is the smallest grip out there. I was looking at LSI grips because they cut them for your frame dims, easier to fit. https://www.egwguns.com/egw-lower-paddle-safety-ss Lowered Thumb Safety https://www.limcat.com/limcat-2011-grip https://lonestarinnovations.com/lsi-outlaw-1/ Link to comment Share on other sites More sharing options...
proven Posted February 17, 2020 Share Posted February 17, 2020 I’m using STI mags. I have used it on a STI frame and a Black Mountain frame. I did not need to any fitting for either frame. I can try and get some pictures. As far as size goes It feels about the same size as the STI plastic grips to me. Link to comment Share on other sites More sharing options...
konkapot Posted February 20, 2020 Share Posted February 20, 2020 I'd love to hear back from someone who's put some rounds through these. Curious about durability Link to comment Share on other sites More sharing options...
jesseskinner Posted February 21, 2020 Share Posted February 21, 2020 (edited) @Onpoint- Are you you affiliated with Onpoint Manufacturing on gun broker (https://www.gunbroker.com/item/856824011) who seems to be selling the same product as Blackmountain? Edited February 21, 2020 by jesseskinner Link to comment Share on other sites More sharing options...
TSL Posted July 12, 2020 Share Posted July 12, 2020 Do we need to change holster or is it same with polymer Sti grip? I’m currently using Sti Poly grips. thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now