Badger663 Posted October 21, 2019 Share Posted October 21, 2019 (edited) I recently bought a strike Industries strike switch and it is definitely not compatible with the hiperfire trigger in my Sig MPX. Does anyone know if the Radian Talon ambi will work with this setup? I know alot of 90 degree throws work but I would definitely prefer a 45 or 60 degree if possible. Edited October 21, 2019 by Badger663 Spelling Link to comment
kahless5876 Posted October 21, 2019 Share Posted October 21, 2019 I'm pretty sure the Talon will not work. I've got the standard 60° Strike Industries safety on two of those triggers and they both work great. Sent from my SM-G955U using Tapatalk Link to comment
mrd Posted October 21, 2019 Share Posted October 21, 2019 Oh-oh... Sorry if this is a hijack - I have the Strike Industries Hex selector switch 60/90 3 in 1 safety on its way, is it compatible with the Hiperfire Eclipse/24c? Link to comment
stick Posted October 21, 2019 Share Posted October 21, 2019 This is from the FAQ's on Hiperfire's website Safety/Selectors: HIPERFIRE® knows of six safety selectors that will not work with HIPERTOUCH® 24 series triggers: Seekins Precision Ambi Safety (60 and 90 deg throws) V SEVEN HYBRID 3 GUN/SPORT SELECTORS Elftmann Slide Safety Selector Talon Ambidextrous 45/90 Safety Selector – Tungsten Grey 2 Lever BAD-CASS or BAD-ASS Short Throw Safety Selector KE Arms Ambi Safety Selector (45/90 deg throws) HIPERTOUCH® 24 Series Triggers The frame component of the HIPERTOUCH® 24 FCG that provides the toggle spring system support is designed to ride on the barrel of semi-auto or “MIL-spec” safety/selectors (not full-auto). This permits normal functional rotation of the safety/selector. An aside: when the FCGs are first installed, some users will notice a little grit during rotation, which is a function of the surface finish on the safety/selector barrel. With a few cycles it will smooth out as the frame and safety/selector self polish. The ambi safeties listed above do not have a large contiguous cylindrical barrel surface like the stock version; two or more channels or a small diameter barrel have been cut into them that accepts the rear of the trigger when pulled into over travel. The toggle spring frame drops into these channels, which not only relieves necessary compression of the toggle springs but may also prevent free rotation of the safety/selector or even cause rotation of the selector during repeat fire as in the number two case above. HIPERTOUCH® EDT Series Trigger The Seekins works in 60 deg throw mode in SAFE and FIRE w/o issue. However, in 90 deg throw mode, the trigger will rotate enough to release the hammer. This is because the trigger tail is shorter than MIL/stock triggers and can move up into the exposed Seekins SS slot just enough to release the hammer when pulled. Other Ambi Controls: The ambi bolt catch on S&W M&P10s interferes with free rotation of HIPERTOUCH® 24 series triggers. Users have simply removed the ambi control and restored proper function of the 24 series FCG. Some safety selectors, such as the JP Adjustable/Reversible Safety Selector, have adjustable set screws and locking screws that eliminate sear/trigger travel. HIPERFIRE® recommends you review the selector manufacturer’s installation instructions to ensure proper selector function. Link to comment
Chillywig Posted October 21, 2019 Share Posted October 21, 2019 (edited) I have had a seekins 60 degree in my MPX with eclipse trigger for a long time now. It had been working fine for a year or more before I found out it wouldn't work. LOL I see in the above info the seekins is only a problem in the 90 set up Edited October 21, 2019 by Chillywig Link to comment
ck1 Posted October 21, 2019 Share Posted October 21, 2019 I run Hiperfire’s own “Hiperswitch”, it’s a 60 degree ambi that’s decent, and it’s 100% despite the silly name lol Link to comment
Adamj Posted October 22, 2019 Share Posted October 22, 2019 I also run the hiperswitch with my eclipse. It works just fine and I like the 60° throw. Link to comment
jualdeaux Posted October 22, 2019 Share Posted October 22, 2019 Doesn't the Hiperswitch have plastic switches? Does that bother anyone? Link to comment
kahless5876 Posted October 23, 2019 Share Posted October 23, 2019 Doesn't the Hiperswitch have plastic switches? Does that bother anyone?I don't like the feel of it. I think it's the fat feel of the switches. Link to comment
Adamj Posted October 23, 2019 Share Posted October 23, 2019 1 hour ago, jualdeaux said: Doesn't the Hiperswitch have plastic switches? Does that bother anyone? It doesn't bother me at all. In 3 gun where I have to flip the safety on and off on the clock in sometimes awkward positions the selector matters more to me. In PCC I have my thumb resting on the selector and I don't have to thumb the safety on while the timer is running. It just doesn't seem as important for USPSA. Link to comment
cvincent Posted October 23, 2019 Share Posted October 23, 2019 Ascend armory 50 degree throw. is what I use with the eclipse. In an AR9 though Sent from my iPhone using Tapatalk Link to comment
ck1 Posted October 23, 2019 Share Posted October 23, 2019 18 hours ago, jualdeaux said: Doesn't the Hiperswitch have plastic switches? Does that bother anyone? Doesn’t bother me. Link to comment
Ontos Posted October 24, 2019 Share Posted October 24, 2019 On 10/20/2019 at 9:41 PM, Badger663 said: I recently bought a strike Industries strike switch and it is definitely not compatible with the hiperfire trigger in my Sig MPX. Does anyone know if the Radian Talon ambi will work with this setup? I know alot of 90 degree throws work but I would definitely prefer a 45 or 60 degree if possible. I run a Radian Talon ambi at 45° with an Eclipse and it runs 100%. It’s in a Quarter Circle AR-9 lower, though. Link to comment
mrd Posted November 5, 2019 Share Posted November 5, 2019 On 10/21/2019 at 10:18 AM, mrd said: Oh-oh... Sorry if this is a hijack - I have the Strike Industries Hex selector switch 60/90 3 in 1 safety on its way, is it compatible with the Hiperfire Eclipse/24c? This combo worked without problems in my AR-15. Link to comment
Acer2428 Posted November 6, 2019 Share Posted November 6, 2019 I have tried many different combos. The Hiperswitches are cheap molded plastic. The edges are hard. When I went to sand the weak-side down to clear my grip, I found a large void in it. No confidence, junk product IMO. I tried Timber Creek, generic ambis, Strike Ind, etc. The Odin Works paddle jobber is what I settled on. Adjustable, had paddles, works well. Only downside is price. Link to comment
TalkingMonkey Posted November 15, 2019 Share Posted November 15, 2019 I've been using the Hiperswitch with my 24C this past season with no issues. Didn't love that you have to clip the detent spring to tune the efforts, but it works fine and there are no worries about compatibility. Link to comment
OptimiStick Posted January 27, 2020 Share Posted January 27, 2020 On 11/6/2019 at 8:30 AM, Acer2428 said: I have tried many different combos. The Hiperswitches are cheap molded plastic. The edges are hard. When I went to sand the weak-side down to clear my grip, I found a large void in it. No confidence, junk product IMO. I tried Timber Creek, generic ambis, Strike Ind, etc. The Odin Works paddle jobber is what I settled on. Adjustable, had paddles, works well. Only downside is price. Is that the Ambi Modular Safety (AMS)? . That's what I have on order and trying to figure out if its compatible with the 24c Link to comment
OptimiStick Posted January 27, 2020 Share Posted January 27, 2020 Answered my own question. I didn't realize it got here Saturday. Anyways, Hipertouch Comp (previously 24c) works with the Odin AMI safety selector in 45 degree config, but not 90 degree config. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now