jaysrgu Posted October 2, 2019 Share Posted October 2, 2019 what other triggers can be put into a shadow2? i have heard the 85 trigger can but wondering if anything else ,and does anyone have a picture of the 2 triggers showing the difference? Link to comment Share on other sites More sharing options...
Ludde Posted October 2, 2019 Share Posted October 2, 2019 Any CZ series trigger can be installed, I assume you want to preserve the DA function so that limits you to all the different DA/SA triggers. Personally I use a old style SP-01 Shadow trigger in the Shadow 2 that moves the trigger face a couple of mm closer. Link to comment Share on other sites More sharing options...
George16 Posted October 2, 2019 Share Posted October 2, 2019 The old 85C trigger moves the trigger shoe closest unless you want to install the RRK kit. The RRK kit moves the trigger shoe about 5mm to the rear according to CGW website. It’s consists of an 85C trigger drilled and tapped for pretravel and overtravel screws plus a short reset disconnector. There’s a picture in a thread in the CZ forum showing the different curve angles of various CZ triggers. Link to comment Share on other sites More sharing options...
robchavous Posted October 2, 2019 Share Posted October 2, 2019 I prefer the old 97 triggers. I think Cajun sells them as the "thick" trigger.Sent from my Pixel 3 XL using Tapatalk Link to comment Share on other sites More sharing options...
MoRivera Posted October 7, 2019 Share Posted October 7, 2019 The trigger that comes stock on the Shadow 2 is the one labeled "Shadowline" below, I believe. Link to comment Share on other sites More sharing options...
obsessiveshooter Posted October 8, 2019 Share Posted October 8, 2019 So which trigger would increase the reach the most? I'd love to do that on my pistol. Big hands, long fingers. Sent from my SM-N960U using Tapatalk Link to comment Share on other sites More sharing options...
jaysrgu Posted October 9, 2019 Author Share Posted October 9, 2019 i was hoping Stuart would comment in here,id like a flatter trigger but looking at these pic it doesn't appear the 85 does much,txs for posting pic Moe Link to comment Share on other sites More sharing options...
MoRivera Posted October 9, 2019 Share Posted October 9, 2019 5 hours ago, obsessiveshooter said: So which trigger would increase the reach the most? I'd love to do that on my pistol. Big hands, long fingers. Sent from my SM-N960U using Tapatalk In both DA and SA? I think maybe the the 'thick' trigger that normally comes stock on the CZ 97. One of the reasons why I like the Original 85C trigger is that it moves the trigger reach a bit forward in SA, and isn't as curved as the stock or recurved triggers. Also prefer the thicker triggers on my DA/SA Sigs, same reason. I don't like having the SA break way far back against the rear wall of the trigger guard. Also nice having an adjustment screw that limits overtravel. Link to comment Share on other sites More sharing options...
Tok36 Posted October 11, 2019 Share Posted October 11, 2019 I agree with MoRivera, the Black Recurve trigger should give you the shortest reach and the CZ97 factory trigger should give you the longest reach. Mind you we are not talking about allot either way. The Old style 85 Combat trigger should be close to the factory CZ97 trigger and it comes drilled and tapped for an over travel set scerw. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now