Brass gets stuck in between red dot and eject port

[MattCan]

I got this STI DVC O recently and having too many ejection problem, especially (as shown in picture attached) in between red dot assembly and ejection port. Should I send this back to STI, or do you think is this lubrication problem. (Using 9mm major I bought online).

[echotango]

With an rts2, the only way I think that would happen is the extractor is not tight enough. 

[MattCan]

With an rts2, the only way I think that would happen is the extractor is not tight enough. 

Any way to fix it myself? Or should I bring it to gunsmith?


Sent from my iPhone using Tapatalk

[echotango]

48 minutes ago, MattCan said:

Any way to fix it myself? Or should I bring it to gunsmith?


Sent from my iPhone using Tapatalk

If it is a standard ejector, and not an aftec, you can bend it to create more force.  youtube is your friend. Same as any 1911 ejector. 

[MemphisMechanic]

The location of that brass strongly indicates you need to tune extraction / ejection.

 

I’m not a 2011 guy, but I do know that a well tuned one should come out the side a LOT more than your nearly-12-o-clock jam’s location.

[Service Desk]

Inadequate extractor tension....if you are not confident to make an adjustment then take the gun to a gunsmith. It won't take long ... Then you should be good to go