TP9SFX mags not dropping free

[jessesmith121]

Im having a weird issue with my SFX.  my mags are sticking in the gun.  Wonder if anyone else has the issue and what they did to fix it.  I am using the TF extendos and factory mags

[bockerSV]

Here's a thread on the topic. I can't speak from experience, my mags eject like they're supposed to even with a pretty beaten up magwell:

 

[random_guy7531]

I also had this problem with my Canik. The easiest answer (and what I ended up doing) was to lightly file/sandpaper the mag guides inside the magwell. Additionally, you should ensure that your mags aren't being held by the mag release. I did not have this issue, but some others I have shot with wound up with magazines that would be held in with friction from the mag release after being depressed (because the spring for that button is quite heavy).

[jessesmith121]

Thanks sir!

[MinutemanNorm]

21 hours ago, random_guy7531 said:

I also had this problem with my Canik. The easiest answer (and what I ended up doing) was to lightly file/sandpaper the mag guides inside the magwell. Additionally, you should ensure that your mags aren't being held by the mag release. I did not have this issue, but some others I have shot with wound up with magazines that would be held in with friction from the mag release after being depressed (because the spring for that button is quite heavy).

 

I did exactly what this guy did, however I used a fine metal file. It makes a 100% difference. There's two on each side of the magazine well.

[pbc44]

On 9/5/2019 at 8:48 AM, MinutemanNorm said:

 

I did exactly what this guy did, however I used a fine metal file. It makes a 100% difference. There's two on each side of the magazine well.

Ditto here!

[Derdang]

I had problem recently with my SFX where the  mag release Had to much tension to the magazine which made it not drop smoothly. I assumed it was because it was dirty. Has anyone had this problem before?