rovpilot337 Posted September 1, 2019 Share Posted September 1, 2019 I will be shooting a Glock 35 in USPSA limited. I was wondering if anyone knows if the KKM barrels are any more accurate than the stock barrels. Just a side note I do not reload and shoot all factory ammo. Link to comment Share on other sites More sharing options...
Paul49 Posted September 1, 2019 Share Posted September 1, 2019 This money would be better spent on match fees and practice ammo. The difference will not be noticeable nor relevant given the nature of USPSA. Link to comment Share on other sites More sharing options...
Silverscooby27 Posted September 1, 2019 Share Posted September 1, 2019 They are more accurate. Link to comment Share on other sites More sharing options...
rovpilot337 Posted September 1, 2019 Author Share Posted September 1, 2019 25 minutes ago, Silverscooby27 said: They are more accurate. I appreciate it. I started shooting USPSA about 9 months ago shooting limited minor with what I had. I am a high C class 58% trying to get to B. I know I will stick with it so I am wanting my Glock 35 set up right from the get go. I don't plan on being a national champion because with my job that would never happen. I work offshore for months at a time and cannot do any training during that time. I am in it for the fun and learning, but I still want my equipment to be able to perform as best as possible. Link to comment Share on other sites More sharing options...
B_RAD Posted September 1, 2019 Share Posted September 1, 2019 I've tried several aftermarket, drop in barrels over the years. I've tried them in multiple Glocks. I've never had any success in finding one more accurate than OEM. Everytime, the OEM was more accurate. The problem with asking this question here is, you're going to get different answers and you're not gonna know why. Some random person saying something on a gun forum isn't really gonna be the best info. Everyone is gonna have an opinion and they're not all gonna be all that solid. I'd recommend (random guy on the gun forum) stick with factory and just practice. I can tell you from experience the glock, with factory barrel, will not hold you back from reaching GM level! Link to comment Share on other sites More sharing options...
Silverscooby27 Posted September 1, 2019 Share Posted September 1, 2019 This stuff has been tested. One can look these things up. If buying something allows someone to get excited, have more confidence, and practice more, I think there is value in it even if there is not a major difference in the actual product. Link to comment Share on other sites More sharing options...
TrackCage Posted September 1, 2019 Share Posted September 1, 2019 If I were 9 months into my USPSA journey, an aftermarket barrel would not be where I spend my money. P.S., I shoot a Glock across three different divisions. All three still have OEM barrels. Link to comment Share on other sites More sharing options...
rovpilot337 Posted September 1, 2019 Author Share Posted September 1, 2019 2 hours ago, B_RAD said: I've tried several aftermarket, drop in barrels over the years. I've tried them in multiple Glocks. I've never had any success in finding one more accurate than OEM. Everytime, the OEM was more accurate. The problem with asking this question here is, you're going to get different answers and you're not gonna know why. Some random person saying something on a gun forum isn't really gonna be the best info. Everyone is gonna have an opinion and they're not all gonna be all that solid. I'd recommend (random guy on the gun forum) stick with factory and just practice. I can tell you from experience the glock, with factory barrel, will not hold you back from reaching GM level! Thanks! Link to comment Share on other sites More sharing options...
Rpope423 Posted September 1, 2019 Share Posted September 1, 2019 I shoot a Glock 22 with a 35 threaded KKM barrel and sight block and it’s pretty accurate if I had to say. I can tell a difference. Link to comment Share on other sites More sharing options...
sam_b Posted September 3, 2019 Share Posted September 3, 2019 Just get a 9mm conversion mags and practice for cheaper, you will get more benefit from practice than a marginally more accurate barrel. Link to comment Share on other sites More sharing options...
rovpilot337 Posted September 3, 2019 Author Share Posted September 3, 2019 3 minutes ago, sam_b said: Just get a 9mm conversion mags and practice for cheaper, you will get more benefit from practice than a marginally more accurate barrel. I already have a KKM 9mm conversion. I got it with the gun when I bought it, just havent used it yet. I was mostly just wondering how the OEM compares to the KKM in the same caliber and if it is worth going for. Link to comment Share on other sites More sharing options...
Yondering Posted September 3, 2019 Share Posted September 3, 2019 If it's purely better accuracy you're looking for, I'd spend the money on finding ammo (or a handload) that the gun shoots best, rather than a new barrel. KKM makes great stuff for sure, but most Glock barrels are pretty good too in the hands of a good shooter. It's possible to get a bad barrel of course, but you didn't indicate that to be the case and it's rare. The only reason I buy aftermarket barrels for any of my Glocks is to get a threaded barrel or change calibers. Otherwise the stock barrels in most of mine work great, with one exception - a gen4 G34 that didn't shoot very well. I dropped in a spare G34 Glock barrel and it now shoots like it should. Link to comment Share on other sites More sharing options...
bigtimelarry Posted September 4, 2019 Share Posted September 4, 2019 (edited) On 9/1/2019 at 10:10 AM, B_RAD said: I've tried several aftermarket, drop in barrels over the years. I've tried them in multiple Glocks. I've never had any success in finding one more accurate than OEM. Everytime, the OEM was more accurate. The problem with asking this question here is, you're going to get different answers and you're not gonna know why. Some random person saying something on a gun forum isn't really gonna be the best info. Everyone is gonna have an opinion and they're not all gonna be all that solid. I'd recommend (random guy on the gun forum) stick with factory and just practice. I can tell you from experience the glock, with factory barrel, will not hold you back from reaching GM level! I agree with B-Rad What I do is when you get your gun dialed in, bench rest it and off hand and see how the stock one is, if it's not grouping good then get a KKM. Dont just get a KKM and think they are more accurate. I think maybe with 115gr @ 50 yards the KKM is probably better. I ended up just using Stock. Bob Vogel who is the best glock shooter on the planet uses stock barrel. Same with Sevigny when he shot glocks, he used stock barrels. The only time I saw the pro's using KKM was at the Bianchi Cup where they have 50 yard targets.. Edited September 4, 2019 by bigtimelarry Link to comment Share on other sites More sharing options...
Slalom45 Posted September 6, 2019 Share Posted September 6, 2019 I have both. It does not matter a bit for USPSA. A decent trigger. Good sights. Grip texture. Beyond that I'd save all money for training and ammo. Link to comment Share on other sites More sharing options...
robertg5322 Posted September 6, 2019 Share Posted September 6, 2019 I've had mixed results over eight Glocks. Bar-Sto in a G35 made a huge difference. Storm Lake in a G34 made a big difference. Storm Lake in a G21 made no perceptible difference but allowed me to shoot lead. My oldest Glock, a 2007 G17 is the most accurate Gglock I have. A KKM barrel was not as accurate as the stock barrel. I got to the point where I would only replace barrels if the gun seemed to have accuracy issues.Glock barrels are usually pretty accurate, my G34 being the exception. The G35 I changed to shoot lead, the accuracy increase was a bonus. Link to comment Share on other sites More sharing options...
cheby Posted September 6, 2019 Share Posted September 6, 2019 When I was shooting Glocks, I tried many KKM, Wilson, and Long Wolff barrels in multiple Glocks (G34, 22, 17, and 20) The only justifiable reason to use those drop in barrels is to shoot the bullets that are not appropriate for Glock polygonal barrels (Plated and lead). Link to comment Share on other sites More sharing options...
Yondering Posted September 6, 2019 Share Posted September 6, 2019 Guys, you do not have to use an aftermarket Glock barrel to shoot lead, that is just an old internet and gun shop myth that refuses to die. Glock barrels generally shoot lead very well if you follow the basic rules for lead bullets. In my experience (which includes hundreds of pounds of lead through Glock barrels) most of the time Glock barrels do better with lead than a lot of aftermarket barrels, especially Lone Wolf and Storm Lake. Link to comment Share on other sites More sharing options...
cheby Posted September 6, 2019 Share Posted September 6, 2019 1 minute ago, Yondering said: Guys, you do not have to use an aftermarket Glock barrel to shoot lead, that is just an old internet and gun shop myth that refuses to die. Glock barrels generally shoot lead very well if you follow the basic rules for lead bullets. In my experience (which includes hundreds of pounds of lead through Glock barrels) most of the time Glock barrels do better with lead than a lot of aftermarket barrels, especially Lone Wolf and Storm Lake. I did not know that. What are the rules? How about plated bullets, specifically Xtremes? Link to comment Share on other sites More sharing options...
427Cobra Posted September 6, 2019 Share Posted September 6, 2019 I think it depends, the stock Glock barrel is accurate enough for most, my G35 gen3 stock barrel didn’t like coated bullets, plated and real FMJ pills shot pretty good, my KKM 9 conversion barrel shot everything I fed it good. Link to comment Share on other sites More sharing options...
Yondering Posted September 7, 2019 Share Posted September 7, 2019 (edited) 1 hour ago, cheby said: I did not know that. What are the rules? How about plated bullets, specifically Xtremes? The main thing is bullet diameter - making sure it's large enough to seal the bore. Too many commercial vendors sell cast bullets that are bore size or even less, depending on the barrel. That causes problems with any barrel, not just Glock. We want at least .001" larger than the maximum bore dimensions, and a little larger than that is often better. For example you see a lot of lead 9mm bullets sold as .355 or .356" diameter, but a lot of 9mm bores are .356" or even .357" diameter (including some factory Glock barrels), so we can expect to see leading with those when they are too small, regardless who made the barrel. The other big one is alloy hardness - too soft is bad in any barrel. Swaged lead bullets used to be pretty common (for example Hornady and Speer both sold those wax lubed bullets with cross hatching in the driving band area) and those were nearly pure lead and too soft for a lot of pistol loads; those would lead a lot of barrels but also were prone to skidding in the Glock polygonal rifling. Plated bullets are generally soft swaged lead with a thin copper jacket, and you don't usually get much choice in the size so they are often a bit small IMO. Keeping pressure of your loads within reasonable limits for those seems to be the key. Personally I've had just as much bad luck with them in conventional rifling as I have in Glock barrels; they can work well in either one but can also work poorly in both. In my opinion, most of the time when someone has better results with lead after switching to an aftermarket Glock barrel, it was because of a bullet size problem rather than a rifling type problem. The internal finish on Glock barrels is generally really good, and that works well with lead bullets as long as they are big enough and not pushed too hard for the alloy hardness. Edited September 7, 2019 by Yondering Link to comment Share on other sites More sharing options...
HCH Posted September 9, 2019 Share Posted September 9, 2019 On 9/6/2019 at 7:02 PM, Yondering said: The main thing is bullet diameter - making sure it's large enough to seal the bore. Too many commercial vendors sell cast bullets that are bore size or even less, depending on the barrel. That causes problems with any barrel, not just Glock. We want at least .001" larger than the maximum bore dimensions, and a little larger than that is often better. For example you see a lot of lead 9mm bullets sold as .355 or .356" diameter, but a lot of 9mm bores are .356" or even .357" diameter (including some factory Glock barrels), so we can expect to see leading with those when they are too small, regardless who made the barrel. The other big one is alloy hardness - too soft is bad in any barrel. Swaged lead bullets used to be pretty common (for example Hornady and Speer both sold those wax lubed bullets with cross hatching in the driving band area) and those were nearly pure lead and too soft for a lot of pistol loads; those would lead a lot of barrels but also were prone to skidding in the Glock polygonal rifling. Plated bullets are generally soft swaged lead with a thin copper jacket, and you don't usually get much choice in the size so they are often a bit small IMO. Keeping pressure of your loads within reasonable limits for those seems to be the key. Personally I've had just as much bad luck with them in conventional rifling as I have in Glock barrels; they can work well in either one but can also work poorly in both. In my opinion, most of the time when someone has better results with lead after switching to an aftermarket Glock barrel, it was because of a bullet size problem rather than a rifling type problem. The internal finish on Glock barrels is generally really good, and that works well with lead bullets as long as they are big enough and not pushed too hard for the alloy hardness. Excellent post. I cast all of my bullets and have put many thousands of them through Glocks. Not an issue at all. Link to comment Share on other sites More sharing options...
traingq Posted September 11, 2019 Share Posted September 11, 2019 I ran a KKM barrel on my G34, really didn't see that much of a difference on accuracy. For what I was using it for, USPSA, the stock barrel was more than enough Link to comment Share on other sites More sharing options...
lefty o Posted September 12, 2019 Share Posted September 12, 2019 in my 34, the kkm is slightly more accurate than factory, and the factory is quite a bit more accurate than a storm lake. Link to comment Share on other sites More sharing options...
Another Bill Posted September 15, 2019 Share Posted September 15, 2019 On 9/3/2019 at 10:35 PM, bigtimelarry said: I agree with B-Rad What I do is when you get your gun dialed in, bench rest it and off hand and see how the stock one is, if it's not grouping good then get a KKM. Dont just get a KKM and think they are more accurate. I think maybe with 115gr @ 50 yards the KKM is probably better. I ended up just using Stock. Bob Vogel who is the best glock shooter on the planet uses stock barrel. Same with Sevigny when he shot glocks, he used stock barrels. The only time I saw the pro's using KKM was at the Bianchi Cup where they have 50 yard targets.. "The only time I saw the pro's using KKM was at the Bianchi Cup where they have 50 yard targets.. " and those were most likely not "drop in" but fitted. I have a drop in KKM for my 34 and the only time I can see any difference is braced off bags at 25 yards, otherwise match fees and ammo are more productive. Link to comment Share on other sites More sharing options...
bigtimelarry Posted September 17, 2019 Share Posted September 17, 2019 They were fitted. John Nagel did all of them back then.. Still, we're talking a minute difference.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now